MWM Freni e Frizioni supplier in Romania
For MWM Freni e Frizioni we quote EMF/MD and FN-CL/FC-FA electromagnetic brakes, EMSR, EMC-N/L, MPG, MPR-N and IS clutches, EC-Z and DPR toothed clutches and GFF combined units; we need the series, torque, coil voltage and mounting dimensions.
Founded in 1965 · Headquarters: Lainate, Italy
Who is MWM Freni e Frizioni and what does it make?
MWM Freni e Frizioni, from Lainate (Milan), Italy, makes brakes, clutches and couplings with electromagnetic, pneumatic or hydraulic actuation for industrial machine drives. The range covers electromagnetic safety brakes, electromagnetic, pneumatic and hydraulic clutches, toothed clutches, torque limiting couplings, combined brake-clutch units and caliper brakes.
The basic difference is between the positive and the negative version. On the positive series, engagement or braking happens when the control signal is applied; on the negative, spring-applied series, the brake holds when there is no control signal and the clutch disengages when the coil is energised. This is why the negative FN-CL/FC-FA brakes are used as safety or parking brakes. Toothed clutches come with three tooth profiles: triangular, backlash-free, for engagement at standstill or at almost zero relative speed; trapezoidal, with backlash; and saw-tooth, for engagement in motion, transmitting torque in one direction only.
The GFF combined units put a single-disc clutch and a single-disc brake in one closed housing, with IP 44 protection (IP 54 on request), for drives with many duty cycles. The torque limiting couplings are multi-disc, with friction linings or face teeth, with manual or pneumatic torque adjustment. For a quotation, send the series from the nameplate, the required torque, the coil voltage and the mounting dimensions.
What do we supply from the MWM Freni e Frizioni range?
| Product | Description |
|---|---|
| Electromagnetic brakes, EMF/MD and FN-CL/FC-FA series | Safety brakes for industrial drives. The EMF/MD series brakes when the control signal is applied, while the FN-CL/FC-FA series brakes without a control signal and is released by a signal. There is also the FN185 single-disc, spring-applied brake in a square shape, with a flange for the NEMA standard. |
| Electromagnetic, pneumatic and hydraulic clutches | The positive EMSR, MPG and IS series engage when energised, while the negative, spring-applied EMC-N/L and MPR-N series disengage when energised. The EMSL600/DF-B clutch, four-pole, reaches static torques of up to 8000 Nm. |
| EC-Z, ESB-N/Z, DPR and DPR-N toothed clutches | Positive or negative engagement, with electromagnetic or pneumatic actuation, through face teeth. For connection to the engine flywheel there are pneumatic versions: DPG06-SAE-SG, with a custom flange and splined hub, and DPG07/HT-SAE, with an SAE flange. |
| GFF combined units and torque limiting couplings | The GFF-A-A/P and GFF/FC-FA units integrate a single-disc clutch and brake in the same housing. The torque limiting couplings protect the transmission against overload, with manual or pneumatic adjustment. |
Why MWM Freni e Frizioni?
- Positive and negative versions of brakes, clutches and toothed clutches — behaviour without the control signal is chosen according to the safety of the drive
- FN-CL/FC-FA negative brakes — they stay braked without a control signal, so they are used as safety or parking brakes
- EMSL600/DF-B electromagnetic clutch, four-pole, for static torques of up to 8000 Nm
- Combined brake-clutch units in a closed IP 44 housing — one unit for drives with repeated engagements and braking
- Toothed clutches with triangular, trapezoidal or saw-tooth profile — the profile is chosen according to the relative speed at engagement
Which MWM Freni e Frizioni codes and series are requested most often?
| Code | Description |
|---|---|
| EMF/MD | Electromagnetic safety brake, positive |
| FN-CL/FC-FA | Electromagnetic safety brake, negative |
| FN185 | Electromagnetic single-disc, spring-applied brake, square shape, NEMA flange |
| EMSR | Electromagnetic clutch, positive |
| EMC-N/L | Electromagnetic clutch, negative |
| EMSL600/DF-B | Electromagnetic clutch, four-pole, double flux |
| MPG | Pneumatic clutch, positive |
| MPR-N | Pneumatic clutch, negative |
| IS | Hydraulic clutch, positive |
| EC-Z | Electromagnetic toothed clutch, positive |
| ESB-N/Z | Electromagnetic toothed clutch, negative |
| DPR | Pneumatic toothed clutch, positive |
| DPR-N | Pneumatic toothed clutch, negative |
| GFF-A-A/P | Combined brake-clutch unit |
| GFF/FC-FA | Combined brake-clutch unit |
Where is MWM Freni e Frizioni equipment used?
- Drives with frequent starting and stopping cycles — combined brake-clutch units in a closed housing
- Industrial machines with safety requirements — negative brakes that hold without a control signal
- Transmissions with possible overloads — multi-disc torque limiting couplings, with friction linings or face teeth
- Drive groups with splined hub or SAE flange — pneumatic toothed clutches
- Drives with NEMA-flange motors — FN185 electromagnetic brake
How do we supply MWM Freni e Frizioni in Romania?
We can quote MWM brakes and clutches from the electromagnetic, pneumatic and hydraulic series, toothed clutches and combined units. For a correct quotation we need the series from the nameplate, the braking or transmitted torque, the coil voltage or control pressure, the bore and the flange type; a photo of the nameplate and of the mounting dimensions helps a lot. MWM brakes and clutches are supplied to order, usually in 1–4 weeks, and for special designs the lead time may be longer. The exact lead time is stated in the quotation.
The brake-clutch pairing and the positive or negative version are set in the quotation, after we receive the drive diagram and the data from the nameplate of the existing unit.
Frequently asked questions about MWM Freni e Frizioni
What are the EMF/MD and FN185 brakes and the EMSR, EMC-N/L and MPG clutches from MWM?
EMF/MD is a positive electromagnetic safety brake, FN185 a single-disc, spring-applied electromagnetic brake with a NEMA flange, EMSR a positive electromagnetic clutch, EMC-N/L a negative one, and MPG a positive pneumatic clutch.
What do positive and negative clutch or brake mean?
In the positive version, engagement or braking takes place when the coil or the control signal is energised. In the negative, spring-applied version, the brake holds without a control signal and is released by a signal, while the clutch disengages when energised. The FN-CL/FC-FA negative brakes are used as safety or parking brakes.
How do I choose the tooth profile of a toothed clutch?
The triangular profile has no backlash and is used for engagement at rest or at almost zero relative speed. The trapezoidal one has backlash and is also used at very low relative speeds. The saw-tooth profile allows engagement in motion, at medium to low relative speed, with torque in one direction only.
Can you replace an existing brake or clutch?
Yes, after checking the data: the series from the nameplate, the torque, the coil voltage, the bore and the flange dimensions. With them we identify the suitable series, and equivalence with a unit of another make is confirmed after comparing the mounting dimensions and the torque.
Do you supply MWM products in Romania and how fast?
Yes. MWM brakes and clutches are supplied to order, usually in 1–4 weeks; for special versions the lead time may be longer. You receive the exact lead time in the quotation, after we confirm the series, the torque and the control voltage.
How do I request a MWM Freni e Frizioni quotation?
Send the MWM Freni e Frizioni code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 22 November 2026 · Sources: MWM Freni e Frizioni S.r.l. (manufacturer documentation)

