Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Neugart supplier in Romania

Precision planetary gearboxes for servo drives

Founded in 1928 · Headquarters: Kippenheim, Germany

Request a quote

Who is Neugart and what does it make?

Neugart is a German company from Kippenheim, between Freiburg and Strasbourg, active since 1928 in building precision planetary gearboxes for servo drives. The range is split into two lines: Economy (series PLE, PLQE, PLPE, PLHE, PLFE, PFHE and the variants with the W prefix: WPLE, WPLQE, WPLPE, WPLHE, WPLFE) and Precision (PSNpro, PSFNpro, PSBNpro, WPLN, WPSFN, WGN, PSN, PSFN, PLN, PLFN, PSBN), plus a series dedicated to special applications — NGV, HLAE, NDF, NDFC for robotics, industrial vehicles and hygienic design. We can quote single gearboxes or gearboxes for small machine series.

The Economy line covers torque from 5 to 800 Nm, reduction ratios of up to 512:1 and angular backlash of 6-28 arcmin — enough for standard production cycles, where extreme precision is not the main criterion. The Precision line covers torque of 14-1800 Nm, the same ratios of up to 512:1, but with backlash down to 0-8 arcmin, for precision positioning in robotic systems and high loads. The choice between the two lines is made according to the angular backlash and the torque required by the axis; mounting dimensions are confirmed on the data sheet of the chosen series.

For servo drive axes on machine tools, packaging lines or robots, Neugart offers a range where precision and cost can be adjusted within the same design family, without switching to another manufacturer when project requirements change.

What do we supply from the Neugart range?

ProductDescription
Economy line (PLE, PLQE, PLPE, PLHE, PLFE)Planetary gearboxes with torque from 5 to 800 Nm, reduction ratios of up to 512:1 and backlash of 6-28 arcmin, also available in the variants with the W prefix (series WPLE, WPLQE, WPLPE, WPLHE, WPLFE), with angular backlash of 11-28 arcmin. Suited to intensive production cycles where cost matters more than extreme positioning precision.
Precision line (PSNpro, PSFNpro, PSBNpro, PSN, PLN)Gearboxes with torque from 14 to 1800 Nm, the same ratios of up to 512:1, but with backlash reduced to 0-8 arcmin. Intended for precision positioning on robotic systems and axes with high loads, where the angular error when the direction of rotation reverses must be minimised.
Series for special applications (NGV, HLAE, NDF, NDFC)Gearboxes adapted for robotics (including delta robots), industrial vehicles and environments that require hygienic design — a construction that allows easy cleaning and resistance to pressure washing, as required in the food and pharmaceutical industries.

Why Neugart?

  • The range covers torque from 5 Nm up to 1800 Nm, on two distinct precision lines
  • Backlash from 0 arcmin (Precision) to 28 arcmin (Economy), chosen according to the real requirement of the axis
  • Reduction ratios of up to 512:1 available on both product lines
  • A series dedicated to robotics and industrial vehicles (NGV, HLAE, NDF, NDFC) for special applications
  • A company with over nine decades of experience in planetary gearboxes

Which Neugart codes and series are requested most often?

CodeDescription
PLEeconomy coaxial planetary gearbox, torque 5-800 Nm, IP54 protection
PLQEeconomy angular planetary gearbox, torque 5-260 Nm, sizes 40-120
PLPEcoaxial planetary gearbox, torque 5-460 Nm, high radial/axial forces
PLHEsealed planetary gearbox, IP65 protection, torque 15-260 Nm
PLFEplanetary gearbox with flange output, torque 5-260 Nm
PFHEsealed planetary gearbox, IP65 protection, torque 15-260 Nm
WPLEgearbox from the Economy line (W prefix), torque 5-260 Nm, angular backlash 11-28 arcmin
WPLQEgearbox from the Economy line (W prefix), torque 14-260 Nm, angular backlash 11-21 arcmin
WPLPEgearbox from the Economy line (W prefix), torque 5-195 Nm, angular backlash 11-25 arcmin
WPLHEgearbox from the Economy line (W prefix), IP65 protection, torque 14-260 Nm, angular backlash 11-18 arcmin
WPLFEgearbox from the Economy line (W prefix), with flange output, torque 14-260 Nm, angular backlash 11-18 arcmin
PSNproprecision helical planetary gearbox, torque 14-1800 Nm, 1-8 arcmin
PSFNproprecision planetary gearbox with flange, torque 14-1800 Nm
PSBNproprecision planetary gearbox with bevel gear, torque 14-830 Nm, IP65
PSNstandard precision helical planetary gearbox, torque 14-950 Nm
PSFNprecision planetary gearbox with flange, torque 14-950 Nm
PSBNprecision planetary gearbox with bevel gear, torque 14-470 Nm
WPLNcoaxial planetary gearbox with very low backlash, torque 22-800 Nm, 0-5 arcmin
WPSFNplanetary gearbox with flange and low backlash, torque 22-620 Nm
WGNprecision angular planetary gearbox, torque 22-320 Nm, fixed backlash 5 arcmin
PLNprecision coaxial planetary gearbox, high torque 27-1800 Nm
PLFNplanetary gearbox with flange, high torque 27-1800 Nm
NGVplanetary gearbox with hygienic design, for the food industry, torque 18-260 Nm
HLAEplanetary gearbox for handling equipment, IP69K protection, torque 15-171 Nm
NDFplanetary gearbox for delta robots, torque 180-530 Nm, backlash 1 arcmin
NDFCcompact planetary gearbox for delta robots, torque 32-330 Nm

Where is Neugart equipment used?

  • Automation and robotics — servo drive axes on industrial robots
  • Packaging — gearboxes for high-speed filling and labelling lines
  • Machine tools — precision positioning axes
  • Food industry — hygienic design variants for wet environments
  • Industrial vehicles — integrated gearboxes for traction systems

How do we supply Neugart in Romania?

We supply Neugart gearboxes to order, usually within 1–4 weeks of order confirmation. The technical data comes from the manufacturer's technical documentation. For a quotation we need the required torque, the desired reduction ratio, the maximum permitted backlash and the type of motor the gearbox will be mounted on. We quote the gearbox requested; complete axis sizing and the load calculation stay with the machine designer.

Complete sizing of the servo drive axis is outside our offer, and the availability of less common torque-ratio combinations is confirmed in the quotation.

Frequently asked questions about Neugart

What is the difference between the Economy and Precision lines at Neugart?

The Economy line, with the PLE, PLQE, PLPE, PLHE and PLFE series, covers torques between 5 and 800 Nm and is designed for standard applications without strict angular backlash requirements. The Precision line, through the PSNpro, PSFNpro or PLN series, goes up to 1800 Nm and offers controlled angular backlash, from 1 to 8 arcmin, for positioning axes where repeatability matters a great deal. The Economy variants with the W prefix (for example WPLE) have angular backlash of 11-28 arcmin, compared with 6-22 for the Economy series without the W prefix.

What maximum torque do Neugart PSNpro planetary gearboxes offer?

The PSNpro series covers a torque range between 14 and 1800 Nm, depending on housing size, with angular backlash of only 1 to 8 arcmin. It is a high-precision helical design, recommended for robotics or machine tool axes where repeatable positioning is essential. The PSFNpro variant adds a flange output for direct mounting on the equipment.

Which Neugart gearbox is suitable for delta robots?

For delta robots, Neugart offers the NDF and NDFC series. NDF covers torques between 180 and 530 Nm, with angular backlash of 1 arcmin. NDFC is the compact variant, with torques between 32 and 330 Nm and angular backlash between 1 and 5 arcmin, suited where the available mounting space is limited.

Do you supply Neugart planetary gearboxes in Romania?

Yes, we supply to order models from the Economy and Precision lines and the special NGV, HLAE and NDF series presented above, based on the manufacturer's technical catalogues. The lead time to order is usually 1–4 weeks, depending on the size and configuration requested. For a correct quotation, send the required torque, the input speed and the angular backlash permitted by the application.

What do I need to send for a quotation for a Neugart planetary gearbox?

You need to state the required output torque, the desired reduction ratio, the motor input speed, the maximum permitted angular backlash and whether the application requires IP65 or IP69K protection. This data allows the correct choice between the Economy and Precision lines and avoids wrong sizing of the gearbox chosen for the installation.

How do I request a Neugart quotation?

Send the Neugart code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Neugart, Neugart GmbH (manufacturer documentation)