Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Oemeta supplier in Romania

For Oemeta we quote NOVAMET and ESTRAMET water-miscible fluids, OEMETOL and HYCUT oils, oil-free FRIGOMET fluids and MICROTOL lubricants; for a quotation we need the material machined, the operation and the fluid currently used on the machine.

Founded in 1916 · Headquarters: Uetersen, Germany

Request a quote

Who is Oemeta and what does it make?

Oemeta is a German manufacturer of fluids for metal cutting, founded in 1916 in Berlin and based today in Uetersen, near Hamburg. The range includes water-miscible fluids (the NOVAMET, ESTRAMET and ALUMET series), cutting and grinding oils (OEMETOL and HYCUT), oil-free grinding fluids (FRIGOMET), lubricants for minimum quantity lubrication, MQL (MICROTOL), emulsion control additives, phosphate-free alkaline and neutral detergents, process oils and accessories such as dosing systems, oil separators and refractometers.

The technical difference lies in the base oils. OEMETOL oils start from a synthetic base oil obtained by the gas-to-liquid process, free of organic nitrogen, heavy metals, zinc and chlorine compounds, with a high flash point and low evaporation. The HYCUT family uses synthetic ester oils and can work as a cutting oil, hydraulic oil, cleaner or two-component emulsion, where the oil and the additives are topped up separately over the life of the bath. HYCUT SE 12 has a viscosity of 13 mm²/s, and OEMETOL 605 HM drops to 4 mm²/s for honing and precision grinding.

What matters is the choice by operation and material: deep-hole drilling, milling, turning, threading, broaching or grinding, on steel, stainless steel, aluminium, magnesium, cast iron, yellow metals, titanium, hard metals, glass or ceramics. For each product the compatible materials and the operations it was developed for are listed, which makes it easier to compare with the fluid currently used on the machine.

What do we supply from the Oemeta range?

ProductDescription
NOVAMET, ESTRAMET and ALUMETWater-miscible concentrates, mixed at the machine. ALUMET AL 100 covers aluminium, grey cast iron, stainless steel and steel; ESTRAMET 575 MG is boron-free and mineral-oil-free, for aluminium and magnesium; ESTRAMET S 95 targets highly alloyed materials and titanium; NOVAMET 1000 Y is free of boron and formaldehyde.
OEMETOL and HYCUT SE 12Cutting and grinding oils for drilling, turning, milling, honing and threading. OEMETOL 600 HC has a viscosity of 9.2 mm²/s, OEMETOL 610 GT has 11 mm²/s and a high flash point, and OEMETOL 605 HM, with 4 mm²/s, is made for honing and grinding.
HYCUT CF 21 and ET 46 with ADDITIV BX or ETTwo-component system based on synthetic ester oils, from which the emulsion is prepared. The oil and the additive are topped up separately, which allows adaptation to the process, the material and the level of lubrication required, and the products in the family are compatible with each other.
FRIGOMET and MICROTOLFRIGOMET 461, 850, BF 600 and HM 442 are oil-free, colourless fluids for grinding steel, stainless steel, glass and hard metals. MICROTOL EC 32 and FA 20 are minimum quantity lubricants, used on MQL systems with direct spraying at the cutting edge.

Why Oemeta?

  • OEMETOL oils with a gas-to-liquid synthetic base — free of organic nitrogen, zinc and chlorine, with low evaporation and a high flash point, suitable for machines with oil mist
  • Two-component HYCUT — the oil and the additives are controlled separately in the emulsion, so the properties of the bath can be brought back into range without a complete change
  • Colourless, transparent FRIGOMET fluids — grinding can be followed visually, including on glass and on hard metals
  • MICROTOL for minimum quantity lubrication — compatible with single-channel and two-channel MQL systems, with no residue on the part
  • Additives, phosphate-free detergents and dosing and measuring accessories — the range also covers maintenance of the emulsion bath, not only the fluid

Which Oemeta codes and series are requested most often?

CodeDescription
NOVAMET 110Water-miscible fluid for steel, stainless steel, aluminium and grey cast iron
NOVAMET 760 AEWater-miscible fluid, free of boron and formaldehyde
NOVAMET 770 AEWater-miscible fluid, free of mineral oil, boron and formaldehyde
NOVAMET 875Water-miscible fluid, free of formaldehyde and sulphur
NOVAMET 1000 YWater-miscible fluid for yellow metals and steel
ESTRAMET S 95Water-miscible fluid for difficult machining, including titanium
ESTRAMET 575 MGWater-miscible fluid for aluminium and magnesium
ALUMET AL 100Water-miscible fluid for aluminium, cast iron, stainless steel and steel
OEMETOL 546Cutting and grinding oil, honing and grinding
OEMETOL 600 HCCutting oil, viscosity of 9.2 mm²/s
OEMETOL 605 HMOil for honing and grinding, viscosity of 4 mm²/s
OEMETOL 610 GTCutting oil, viscosity of 11 mm²/s
HYCUT SE 12Synthetic ester oil, viscosity of 13 mm²/s
FRIGOMET HM 442Oil-free fluid for grinding hard metals
MICROTOL EC 32MQL lubricant free of formaldehyde, biocides and boron
MICROTOL FA 20MQL lubricant for steel, stainless steel, aluminium and cast iron

Where is Oemeta equipment used?

  • Automotive — honing, grinding and deep-hole drilling on steel, cast iron and aluminium parts
  • Electric mobility — machining of aluminium and magnesium for electric drives
  • Electronics — fine machining on aluminium, yellow metals and glass
  • Aerospace — alloy steels, stainless steel and titanium in milling and drilling
  • Machine shops — turning, milling and grinding on CNC machines

How do we supply Oemeta in Romania?

For Oemeta we quote fluids from the NOVAMET, ESTRAMET, OEMETOL, HYCUT, FRIGOMET and MICROTOL series, plus control additives and detergents. We supply them to order, generally in 1–4 weeks, depending on the product, the packaging and the quantity, with the exact lead time in the quotation. To be able to recommend the right version, send us the material machined, the operation (grinding, deep-hole drilling, threading), the type of machine and of the filtration system, plus the name of the fluid currently used and its working concentration.

A fluid is recommended once the material machined, the operation and the filtration system are known.

Frequently asked questions about Oemeta

What does Oemeta make?

Oemeta makes fluids for metal cutting: water-miscible concentrates, cutting and grinding oils, oil-free fluids, minimum quantity lubricants, bath control additives and detergents. Its headquarters and production are in Uetersen, near Hamburg, and the company has operated since 1916.

How do I choose between a water-miscible fluid and a cutting oil?

Start from the operation and the machine. Water-miscible fluids take up heat better, and oils are used for honing, fine grinding or threading, where lubrication matters more. Send us the material, the operation and the filtration system and we will see which NOVAMET, ESTRAMET or OEMETOL series suits.

Do you supply Oemeta fluids in Romania, and how quickly?

Yes, we supply Oemeta fluids and additives to order, usually in 1–4 weeks. Depending on the product, the packaging and the quantity, the lead time can be longer, and the exact date is confirmed in the quotation. Send us the product wanted and the packaging (canister, drum or container).

I use an old fluid on the machine; can I switch to an Oemeta product?

Equivalence is established on the basis of data, not from the name. We need the name of the current fluid, the working concentration, the material machined, the operations and any requirements of the machine manufacturer. On that basis we propose an Oemeta series to be checked, and compatibility with the machine's seals and paint is confirmed before ordering.

What do I send for a quotation on MQL systems with MICROTOL?

For minimum quantity lubrication, what matters is the material, the operation, whether the dosing system works on one channel or two and whether the part is washed after machining. With these data we choose between MICROTOL EC 32, FA 20 or another version and confirm the packaging needed.

How do I request a Oemeta quotation?

Send the Oemeta code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Oemeta Chemische Werke GmbH (manufacturer documentation)