Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Pascal supplier in Romania

Hydraulic clamps for dies and workpiece clamping, nitrogen springs

Founded in 1974 · Headquarters: Itami, Japan

Request a quote

Who is Pascal and what does it make?

Pascal Corporation, with its headquarters and research centre at Itami (Hyogo Prefecture), was founded in May 1974 and manufactures industrial automation equipment based on hydraulic and pneumatic pressure. The name comes from Pascal's principle: the company uses air at 0.5 MPa to obtain hydraulic pressures of up to 25 MPa in the circuit. The plants are in Yamagata, Oita and Dalian (China), and for Europe there is Pascal GmbH in Germany, alongside liaison offices in Stuttgart, Chicago, Bangkok and East Asia.

The catalogue is organised by the type of machine served. For machining centres there are workpiece clamping systems at 7 MPa, 35 MPa or air, with CTU and CTM-N swing clamps, CLU lever clamps, CSU work supports and CMC small cylinders. For stamping presses there are TXA, TYA and TGC die clamps, for injection TYA and TYJ hydraulic clamps, TLC pneumatic clamps, and for die casting the TYB clamp. The offer also includes automatic couplings, pumps, DN and DS series nitrogen springs and tool changers for robots.

Typical applications are automotive parts plants, die-casting foundries and injection or stamping departments that change dies often. A worn clamp is recognised by the letters in its code (for example TYA or CTM-N), and with that code and the rated force of the machine the request can be handled quickly.

What do we supply from the Pascal range?

ProductDescription
TXA / TYA Hydraulic Die ClampsGeneral-purpose clamps for presses, with high clamping force, shock rigidity and long stroke. TXA is the cylinder type and TYA the lever type; TYC and TXE are the auto-slide variants, and TGC is the twist clamp.
TYA, TYJ and TLC Clamps for InjectionFor injection machines there is the TYA hydraulic clamp (the sliding version, TYC-Z/TYC-R with auto-slide, TYA-M without T-slots), the long-stroke TYJ model and the TLC pneumatic clamp, plus magnetic clamps.
7 MPa Workpiece Clamping SystemsSwing clamps (CTU, CTM, CTJ, CTT), lever clamps (CLU, CLM, CLT), expanding clamps CGC/CGT/CGU, work supports (CSU, CST, CSN) and small cylinders CMC, CMD, CME for machining fixtures.
DN and DS Nitrogen SpringsNitrogen gas springs, the DN series for usual sizes and the DS series for small sizes, complemented by the micro hose system for linking several elements in the same die.

Why Pascal?

  • Die clamps for every machine type: TXA/TYA on presses, TYA/TYJ/TLC for injection, TYB for die casting
  • Workpiece clamping at 7 MPa, at 35 MPa or with air: double-acting and single-acting versions, with position sensors on the CTM-B, CTM-C and CTM-T
  • Magnetic clamps and automatic couplings for die changing, in the same family as the control panels
  • DN and DS series nitrogen springs, with a small hose system for connection: a solution for stamping dies
  • Production in Japan and China, with a subsidiary in Germany

Which Pascal codes and series are requested most often?

CodeDescription
TXACylinder-type die clamp, for presses
TYALever-type hydraulic clamp, for presses and injection
TYCTYA clamp with auto-slide
TYJLong-stroke hydraulic clamp, for injection
TLCPneumatic clamp for injection machines
TYBClamp for die-casting machines
TGCTwist clamp for press dies
CTU7 MPa swing clamp, double-acting
CTM-N7 MPa swing clamp, compact model
CLU7 MPa lever clamp
CGC7 MPa expanding clamp
CSU7 MPa work support
CMC7 MPa small cylinder
DNSeries of nitrogen springs
DSSeries of small-size nitrogen springs

Where is Pascal equipment used?

  • Stamping: TXA/TYA die clamps, die lifters and pre-rollers
  • Plastics injection: TYA/TYJ hydraulic, TLC pneumatic and magnetic clamps
  • Die casting: the TYB clamp and magnetic plates for the ejector
  • Machining on CNC centres: CTM swing clamps and CSU work supports
  • Industrial robots: tool changers and pallet grippers

How do we supply Pascal in Romania?

For Pascal products we can prepare quotations starting from the model code on the body of the clamp or cylinder, supplying the items to order. The lead time is usually 1–4 weeks; for complete die-changing systems (clamps, control panel, couplings) the lead time depends on the configuration and may be longer. It helps us to receive the exact model, the system pressure, the machine force expressed in kN and, for presses, the type of sliding. Availability and the final lead time are confirmed after checking the model, before the quotation.

The model catalogue is vast and is updated, so for an older code we check each time whether it is still manufactured in the same form.

Frequently asked questions about Pascal

What does Pascal make?

Pascal Corporation, founded in 1974 at Itami, manufactures hydraulic and pneumatic automation equipment: clamps and supports for workpiece clamping, die clamps for presses, injection and die-casting machines, automatic couplings, pumps, nitrogen springs and tool changers for robots.

How do I choose a Pascal die clamp for a press or an injection machine?

The choice starts from the machine type, its force (for example 4,500 kN for TYA for injection or 2,200 kN for TLC), the thickness of the clamping plate and the stroke required. Send us the machine model and the code on the existing clamps; we then determine the series (TXA, TYA, TYJ or TLC).

Can you supply Pascal products in Romania and within what lead time?

Yes, we bring Pascal products to order, as a rule in 1–4 weeks. Complete die-changing systems may have longer lead times. The exact lead time appears in the quotation, after we check the requested model.

I have an old Pascal clamp; can I find a replacement?

We start from the full code engraved on the body, for example CTM-N or TYA, from the working pressure and from the mounting layout. With these data we check whether the model is still manufactured or which is the current version; interchangeability is confirmed after this check.

What data do I need to send for a quotation for workpiece clamps?

The model or series (CTU, CTM, CLU, CSU), the system pressure (7 MPa, 35 MPa or air), double or single action, the 5 or 10 mm stroke on swing clamps and whether you need a position sensor, as on the CTM-B, CTM-C or CTM-T.

How do I request a Pascal quotation?

Send the Pascal code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Pascal Corporation (manufacturer documentation)