Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

PISCO supplier in Romania

Push-in fittings, flow regulators, vacuum generators and pumps

Founded in 1976 · Headquarters: Okaya, Japan

Request a quote

Who is PISCO and what does it make?

PISCO is the brand of Nihon Pisco Co., Ltd., founded on 18 October 1976 in the city of Okaya, Nagano prefecture, and specialised in pneumatic equipment: quick-connect fittings, flow control valves, vacuum generators, rotary vacuum pumps, suction cups and solenoid valves. The headquarters and main plant are in Okaya, with four additional plants in the Ina area, and the overseas subsidiaries cover Taiwan, USA, Korea, Vietnam and China. About 520 employees are listed.

For a maintenance team, the value lies in the variety of materials and versions. Standard fittings are suited to air or, conditionally, water, up to 1.0 MPa and a vacuum of -100 kPa, with a PBT and nickel-plated brass body, and the same family includes versions in SUS316 and SUS304 stainless steel, in PP, in fluororesin, and weld-spatter-resistant fittings. For vacuum, the VH/VS series is an ejector with an integrated push-in fitting, mountable directly on a solenoid valve, at a nominal supply pressure of 0.5 MPa.

For packaging lines, handling cells with suction cups or installations with pneumatic devices, the PISCO range is used to replace a fitting, a flow regulator or a vacuum ejector. Identification is made from the series printed on the body and from the tube diameter, so requests that include these details are answered faster.

What do we supply from the PISCO range?

ProductDescription
Push-in tube fittingsThe standard series works with air and, conditionally, with water, up to 1.0 MPa and -100 kPa vacuum, between 0 and 60 °C. There are also mini series, stainless steel, PP, chemical-resistant, fluororesin and brass series.
Vacuum generatorsIndividual ejectors such as VH/VS, VU, VUM, VY, VB, VLS and VM/VC, plus complex types VG, VK, VJ, VX, VQ, VZ and VN that combine sensors and valves in a single modular block.
RPV rotary vacuum pumpsPumps with two in-line cylinders and built-in motor: RPV06A with 30 L/min at 50 Hz, RPV062 with 60 L/min, RPV063 with 90 L/min and RPV064 with 120 L/min, in 100 or 200 V versions.
Flow regulators and valvesPush-lock regulators with indicator, high-flow or low-flow versions, needle valves, quick exhaust valves, preset pressure regulators, check valves and silencers, with the SVA, SVB and SVR solenoid valve series.

Why PISCO?

  • Tube fittings in special versions — SUS316, SUS304, PP, fluororesin, weld-spatter-resistant and for mould temperature control
  • VH/VS ejector with built-in push-in fitting — mounts directly on the solenoid valve, at 0.5 MPa nominal pressure
  • Modular vacuum generators VG, VK, VJ, VX, VQ, VZ — pressure sensor and blow-off valve integrated in the same unit
  • RPV06A, RPV062, RPV063, RPV064 rotary vacuum pumps — from 30 to 120 L/min, with single-phase or three-phase motor
  • Flow regulators in many forms — with indicator, high or low flow, in stainless steel, PP or brass, plus check valves and silencers

Which PISCO codes and series are requested most often?

CodeDescription
VH / VSEjector with integrated push-in fitting, mounted directly on the solenoid valve
VUVacuum generator with individual ejector
VUMVacuum generator from the individual ejector family
VYIndividual vacuum generator
VBIndividual vacuum generator
VLSIndividual vacuum generator
VGComplex vacuum generator, with sensor and blow-off valve
VKComplex vacuum generator, combinable modular units
VJComplex vacuum generator, with -S3 version
VXComplex vacuum generator, with -S3 version
VQComplex vacuum generator, with -S3 version
RPV06ARotary vacuum pump, 30 L/min, medium vacuum
RPV062Rotary vacuum pump, 60 L/min
RPV063Rotary vacuum pump, 90 L/min
RPV064Rotary vacuum pump, 120 L/min
SVA / SVB / SVRSolenoid valve series

Where is PISCO equipment used?

  • Packaging and handling — suction cups and vacuum generators for gripping products
  • Food and beverage industry — stainless steel fittings and regulators for dosing equipment
  • Foundries and welding — spatter-resistant fittings and regulators, fittings for mould temperature control
  • Automation and robotics — modular ejectors and accessories for robots
  • Light chemical industry — fluororesin and PP fittings

How do we supply PISCO in Romania?

PISCO items, from fittings and flow regulators to vacuum ejectors and pumps, can be brought in to order, usually in 1–4 weeks. For large quantities of small fittings or for modular vacuum configurations, the lead time may be longer. A correct quotation needs the series or full code, the tube or thread diameter, the fluid and the working pressure. For ejectors, add the suction flow and the required vacuum level. Lead time and availability are confirmed after the series is checked.

Lead times and availability for Europe are given in the quotation, for each request.

Frequently asked questions about PISCO

What products does PISCO make?

PISCO, the brand of Nihon Pisco of Okaya (founded in 1976), makes pneumatic equipment: push-in tube fittings in many materials, flow regulators, valves, vacuum generators and pumps, suction cups, solenoid valves, air preparation units and actuators.

How do I choose a PISCO vacuum generator for a suction cup?

The choice depends on the supply pressure (for example 0.5 MPa nominal for VH/VS), the suction flow and the vacuum level required by the part. If the suction cup is on a branch with several components, a complex series such as VG or VX combines the sensor and blow-off in one unit. Send us these values.

Can you supply PISCO products in Romania, and within what lead time?

Yes, to order. The lead time to order is usually 1–4 weeks and is confirmed in the quotation, as it can vary depending on series and quantity.

I have a PISCO fitting without a clear marking; how do I identify it?

Send us a photo, the outside diameter of the tube, the thread type and the body material (resin or metal). With these details we can narrow down the series, but we propose an equivalent only after checking the data received, not on the basis of appearance.

What details do you need for a quotation on an RPV vacuum pump?

State the model or the required flow (30, 60, 90 or 120 L/min), the motor voltage (single-phase 100/115 V or three-phase 200 V), the mains frequency and the vacuum level needed. RPV06A is medium vacuum, while RPV062, RPV063 and RPV064 are low vacuum.

How do I request a PISCO quotation?

Send the PISCO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Nihon Pisco Co., Ltd. (manufacturer documentation)