Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Rotoflux supplier in Romania

For Rotoflux we quote rotary unions from the G (G20–G50), S, K, R, A, B and M series, based on the code on the body, the fluid, the temperature, the pressure and the operating speed.

Founded in 1996 · Headquarters: Trezzano sul Naviglio, Italy

Request a quote

Who is Rotoflux and what does it make?

Rotoflux is an Italian manufacturer of rotary unions, active since 1996 and based at Trezzano sul Naviglio, near Milan. A rotary union makes the connection between a fixed pipe and a rotating cylinder, drum or shaft, without the fluid being lost through the seal. The manufacturer organises its offer by the fluid carried: water, air and vacuum, coolant, thermal oil, steam and hydraulic oil.

The S series is the universal one for water, with high-capacity versions and versions for printing machines, while the H and L series are for water, the latter with low residual torque. The G series handles diathermic oil, hot water and steam between 180 and 340 °C, in extruders, calenders and machines for film and rubber. The K and Z series are fitted in the cylinder shaft, for example in continuous steel casting, F is entirely stainless steel, and R, T, V and C cover air, vacuum, water and hydraulic oil. For machine tools there are the A, B, BH and Special series, with coolant, air and oil mist (MQL), while D08, D15 and M have several independent channels.

A maintenance engineer meets these parts on calender rolls, on thermal-oil heated drums or on machine tool axes, where a worn seal shows up as leaks. Identification starts from the code on the body, from the fluid, temperature, pressure, speed and the connection thread.

What do we supply from the Rotoflux range?

ProductDescription
G and S Series for High TemperaturesUnions for diathermic oil, hot water and steam: the S series up to 180 °C with high-temperature bearings, the G series up to 340 °C with graphite bushings, in threads from ¾ to 2 inches, for extruders, calenders and rubber machines.
S, H, L, K and Z Series for WaterUnions for cold filtered or dirty water: S universal and high-capacity, H simple, L with low residual torque, while K and Z are fitted in the cylinder shaft, for continuous steel casting installations.
A, B, BH and Special Series for Machine ToolsCompact anodised aluminium unions for coolant, air and MQL, with a seal that allows dry running: B up to 40,000 rpm and 100 bar, BH up to 22,000 rpm and 100 bar, Special up to 40,000 rpm and 200 bar.
D08, D15 and M Multi-Channel SeriesUnions with two or more independent channels: D08 for cooling, air and hydraulic oil, D15 for hydraulic or pneumatic clutches and rotary cylinders, and M with 2, 4 or 6 passages for rotary tables.

Why Rotoflux?

  • Series chosen by fluid: water (S, H, L, K, Z), thermal oil and steam (S for high temperatures, G), air and vacuum (R, T, V), hydraulic oil (C, M), coolant and MQL (A, B, BH)
  • G series up to 340 °C: diathermic oil at 6 bar and steam at 10 bar and 185 °C, with a stainless steel bellows and graphite seals, in threads from ¾ to 2 inches
  • High speeds for machine tools: the B series reaches 40,000 rpm and 100 bar, and the Special series 40,000 rpm and 200 bar, with dry running and no fluid loss
  • Multi-channel unions: D08 and D15 have two independent channels, and M has between 2 and 6 passages, for different fluids without mixing
  • Mounting by application: in the shaft (K, Z, V), on a sleeve (R), with right- or left-hand thread or with a flange, so that the union replaces the existing body

Which Rotoflux codes and series are requested most often?

CodeDescription
G20-1400-01RG series, thermal oil, ¾ inch right-hand thread
G25-1400-01RG series, thermal oil, 1 inch right-hand thread
G32-1400-01RG series, thermal oil, 1¼ inch right-hand thread
G40-1400-01RG series, thermal oil, 1½ inch right-hand thread
G50-1400-01RG series, thermal oil, 2 inch right-hand thread
G20-1500-01RG series, steam, ¾ inch right-hand thread
G32-1500-01RG series, steam, 1¼ inch right-hand thread
G20-1400-02LG series, thermal oil, ¾ inch left-hand thread
G20-1400-03FG series, thermal oil, flange-mounted version
Series SUnions for water, universal and high-capacity
Series KUnions for cold water, fitted in the cylinder shaft
Series MUnions with 2, 4 or 6 passages for air and hydraulic oil

Where is Rotoflux equipment used?

  • Plastics and rubber processing: extruders, calenders, film machines with thermal oil heating
  • Steel industry: continuous casting, with unions fitted in the cylinder shaft
  • Machine tools: main spindles with coolant, air and MQL at high speeds
  • Printing and paper: cylinders cooled or heated with water
  • Rotary tables and clutches: multi-passage unions for air and hydraulic oil

How do we supply Rotoflux in Romania?

We quote Rotoflux rotary unions from the S, G, K, R, A, B, D08 and M series, for water, thermal oil, steam, air, vacuum, hydraulic oil or coolant. We supply them to order, as a rule in 1–4 weeks; for special series or those with several channels, the lead time may be longer. For a quotation we need the code on the body, for example G25-1400-01R, the fluid, the temperature and the pressure, the speed, the thread and its direction, the mounting type (shaft, sleeve, flange) and the number of channels.

A body without a legible code is identified only by measurements, and a replacement series is proposed once we know the fluid, temperature, pressure, speed and thread.

Frequently asked questions about Rotoflux

What does Rotoflux make?

Rotoflux makes, at Trezzano sul Naviglio, near Milan, rotary unions for passing a fluid from a fixed pipe to a rotating part. They are grouped by fluid: water, air and vacuum, coolant, thermal oil, steam and hydraulic oil, in almost twenty series.

How do I choose the right series for thermal oil or steam?

For diathermic oil, hot water and steam above 180 °C, up to 340 °C, the G series is used; the high-temperature S series goes up to 180 °C. The thread from ¾ to 2 inches, the pressure and the cylinder speed then matter. Send us the actual working temperature and the code of the old union.

Within what lead time can you supply a Rotoflux union?

We supply to order, as a rule in 1–4 weeks, depending on the series and size. Versions with several channels or special sizes may need longer; we give the exact lead time in the quotation, after identifying the code.

Can I replace a worn rotary union with a Rotoflux series?

It is checked on the basis of the fluid, temperature, pressure, speed, thread (right or left) and mounting method. A direct replacement is confirmed once we have these data; a photo of the body and the mounting dimensions let us compare with the G, S, K or R series.

What do I need to send for a quotation for a machine tool union?

Send the fluid (coolant, air, MQL), the maximum pressure, the spindle speed, whether the seal must run dry, the connection diameter and thread and the mounting position in the shaft. With these data we choose between the A, B, BH or Special series.

How do I request a Rotoflux quotation?

Send the Rotoflux code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Rotoflux S.r.l. (manufacturer documentation)