Synventive supplier in Romania
For Synventive we quote actuators from the HB2508, HB4016 and PB6016 series, threaded and sliding nozzles, XP tips and activeGate modules; for a quotation we need the nozzle series, the pin diameter and the actuation type.
Headquarters: Peabody, Massachusetts, USA
Who is Synventive and what does it make?
Synventive is a manufacturer of hot runner systems for plastics injection moulding, with headquarters in Peabody, in the United States, and a European office in Bensheim, Germany. A hot runner system keeps the melt at temperature between the injection machine and the mould cavity, so the part fills without cold runners. The programme includes nozzles (threaded, sliding, single-pin and thermal), melt manifolds in custom shapes, hydraulic, pneumatic and electric actuators, activeGate flow control modules and fully pre-wired hot halves.
What sets the technology apart is the control of the valve pin. The actuators of the HB (hydraulic) and PB (pneumatic) series are mounted on the melt manifold and optionally have a position sensor, which sends the pin position to the activeGate module. Synflow regulates the pin opening speed at each nozzle, VMI (the pin monitoring interface) monitors the opening and closing speed remotely, and Dynamic Feed maintains the melt pressure at the cavity entry. For sequential injection, the aim is a uniform surface and good dimensional stability on large parts.
For an injection shop, the actuator is a frequent maintenance item: pins, seals and cooling blocks wear over long cycles. The HB2508 series works with 3 and 3.8 mm pins on 06E and 09E nozzles, and HB4016 with 5, 6 and 8 mm pins on 12E, 16E and 22E nozzles. For applications with short cycles and low shot weights there are the PB4008, PB6016 and PB8016 pneumatic actuators, and the SynCool 1 and SynCool 3 solutions reduce the actuator cooling requirement.
What do we supply from the Synventive range?
| Product | Description |
|---|---|
| Hot runner nozzles: threaded, sliding, single-pin, thermal | Threaded nozzles give good sealing at high pressure, sliding ones allow small assembly heights without cantilever deformation, and single-pin nozzles give precise control at fast cycles. The tips are supplied in the XP and Heat Pipe versions. |
| HB and PB actuators for valve pins | HB2508 and HB4016 are hydraulic, with a working pressure of 40–60 bar and a stroke of 8 and 16 mm. PB4008, PB6016 and PB8016 are pneumatic, at 6–12 bar. The PNC and HYC series cover versions mounted on the manifold or in the mould plate. |
| activeGate: Synflow, Dynamic Feed, VMI | Modules for controlling the melt flow: Synflow regulates the pin opening at each nozzle, Dynamic Feed controls the flow and pressure at the cavity entry, and VMI remotely monitors the pin movement without removing the mould. |
| Melt manifolds and hot halves | Manifolds in shapes adapted to the mould concept, supplied pre-wired, pre-connected or as a complete hot half, ready to fit on the machine. They are combined with HB and PB actuators and activeGate modules; a hot half can have, for example, 16 injection points and an actuation plate. |
Why Synventive?
- HB and PB series with optional position sensor — the pin position reaches activeGate for closed-loop adjustment
- Synflow at each nozzle — the pin opening speed is adjusted individually, useful in sequential injection and in family moulds
- Reduced actuator cooling through SynCool 1 and SynCool 3 — no post-cooling is needed when the system is shut down
- Hydraulic, pneumatic and electric actuators — the choice is made according to the closing force and the response time required
- Pre-wired and pre-connected hot halves — for example the version with 16 injection points and an actuation plate
Which Synventive codes and series are requested most often?
| Code | Description |
|---|---|
| HB2508 | Hydraulic actuator, 3 or 3.8 mm pin, 06E and 09E nozzles, 8 mm stroke |
| HB4016 | Hydraulic actuator, 5, 6 or 8 mm pin, 12E, 16E, 22E nozzles, 16 mm stroke |
| PB4008 | Actively cooled pneumatic actuator, 06E and 09E nozzles |
| PB6016 | Actively cooled pneumatic actuator, 5 mm pin, 12E nozzles |
| PB8016 | Actively cooled pneumatic actuator, 5, 6 or 8 mm pins |
| PNC3008B | Pneumatic actuator mounted on the manifold |
| PNC4508B | Pneumatic actuator mounted on the manifold |
| PNC4512B | Pneumatic actuator mounted on the manifold |
| HYC4520M | Hydraulic actuator mounted on the manifold |
| HYC2314S | Hydraulic actuator for single-pin nozzles (16SVH) |
| CBNS | Pneumatic actuator for single-pin nozzles, 8 mm stroke |
| VP8016P | Pneumatic actuator mounted in the mould plate |
| XP | Nozzle tip style, easy to maintain |
| Heat Pipe | Nozzle tip version with improved heat transfer |
| activeGate | Flow control: Synflow, Dynamic Feed, VMI |
Where is Synventive equipment used?
- Automotive — interior, exterior, under-the-bonnet and lighting parts
- Electronics and electrical engineering — housings and technical parts injection-moulded in large series
- Packaging — moulds with short cycles and low shot weights
- Technical parts and industrial logistics — large components with appearance and dimensional stability requirements
How do we supply Synventive in Romania?
From the Synventive programme we can quote, for injection shops that already use the systems, HB and PB actuators, valve pins, nozzles and tips, as well as wear parts. We supply the wear parts: 24–72 h when the item is in stock, locally or at the supplier, otherwise to order, usually 1–4 weeks. Complete systems are configured on the mould, so, depending on the specification, the lead time may be longer. For a correct quotation, the series of the actuator or nozzle, the pin diameter, the actuation type (hydraulic or pneumatic) and the drawing or number of the mould help.
A complete hot runner system is designed on the geometry of a specific mould and is confirmed once the drawing or the data of the moulded part is available.
Frequently asked questions about Synventive
What does Synventive make?
Synventive makes hot runner systems for injection moulds: nozzles, melt manifolds, actuators for valve pins, pre-wired hot halves and activeGate modules for flow control. The systems are configured for each mould, from single-nozzle applications to blocks with 16 injection points or more.
How do I choose between a hydraulic and a pneumatic actuator?
The pneumatic one reacts fast and suits low shot weights with short cycles. The hydraulic one develops high closing forces, needed for large parts, especially in sequential injection. The choice depends on the pin diameter, the nozzle series and the pressure available at the machine; these three data points help us.
Do you supply Synventive parts in Romania, and how fast?
Yes; a Synventive actuator or nozzle can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise, to order, usually 1–4 weeks. For a complete system or a hot half, depending on the specification, the lead time may be longer; we set it in the quotation, after receiving the mould drawing.
Can an actuator on an older mould be replaced?
It can be checked, once the part is identified. We need the series on the body of the actuator (for example HB4016 or PNC4508B), the pin diameter, the nozzle series, the working pressure and whether there is a position sensor. With these data we determine whether the same model or a close version fits without modifying the plate.
What should I send for a quotation on a hot runner system?
For replacement parts: the series and number on the actuator, nozzle or tip. For a new system: the drawing or 3D model of the part, the material injected, the shot weight, the number of cavities, the actuation type wanted and the machine the mould runs on. With these, a choice can be made between threaded, sliding or single-pin nozzles.
How do I request a Synventive quotation?
Send the Synventive code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Synventive Molding Solutions (manufacturer documentation)

