Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SERTO supplier in Romania

For SERTO we quote stainless steel, brass and PVDF tube fittings of the SO series, Q50+, Q51 and Q52 quick couplings, UHP components and valves; the item is identified by article code, material and tube diameter.

Headquarters: Frauenfeld, Switzerland

Request a quote

Who is SERTO and what does it make?

SERTO is a Swiss manufacturer of tube fittings and components for fluid circuits, based in Frauenfeld. The range covers tube fittings in stainless steel, brass, aluminium, PVDF and polyamide, valves, quick couplings, ultra-high-purity (UHP) components, adapters, tubes and hoses, plus spare parts for fittings. They are used on small process, instrumentation and control lines, where the joint must withstand pressure and be able to be disconnected and remade.

The SO series fittings are supplied in straight, elbow, tee and cross versions, with screw-in thread, with union nut, for panel-wall mounting or for welding. Sizes run from 1 mm, for stainless steel thermocouple fittings, up to 35 mm for brass and aluminium; metric connections are standard, and for many types an inch thread is also available. For stainless steel there are two material variants, standard and L for high pressure, and the thread is sealed with a sealing edge or with an FKM O-ring; brass fittings also come in variants with an NBR O-ring.

The quick couplings are made of brass, stainless steel and PVDF, in ten series, with one-hand operation, mechanical coding and shut-off on one or both sides. The UHP components are orbital-welded joints, with a Nitronic 60 nut and electropolished 316L or 316Ti parts. For a quotation the article code, material, tube outside diameter and thread type matter.

What do we supply from the SERTO range?

ProductDescription
Stainless steel tube fittings, SO seriesThe SO and SOL (high-pressure version) series include straight fittings, screw-in fittings, fittings with union nut, for welding and for panel-wall mounting, plus thermocouple fittings with a stainless steel or PTFE compression ring. Sealing is by sealing edge or by FKM O-ring.
Brass and PVDF fittingsThe brass series uses two grades, M and CV, in straight, reducing and panel versions and with solder nipples. The PVDF series covers straight, elbow, tee, panel and adjustable fittings, with metric or NPT thread, for media where metal cannot be used.
Q50+, Q51 and Q52 quick couplingsThe quick couplings are made of brass, stainless steel and PVDF, in ten series, with working pressures up to 690 bar and high vacuum down to 10⁻⁷ mbar. The coupler and the plug have variants with SERTO connection, panel, external thread or internal thread.
UHP components and valvesUHP joints work up to 500 bar, between -70 and +260 °C, with electropolished parts. The valves include check valves, regulating valves, needle valves, fine metering valves, ball valves and shut-off valves, in stainless steel, brass and plastic.

Why SERTO?

  • Fittings in five metallic and plastic materials — the choice is made according to the medium and the working pressure
  • Stainless steel L variant for high pressure — the same fitting geometry, with material suited to the load
  • Quick couplings from brass to PVDF — the line is disconnected and remade without tools, on aggressive liquid circuits
  • UHP components with Nitronic 60 nut — orbital-welded joint for lines with purity requirements
  • Systematic article code, with a suffix for metric thread, NPT or O-ring — the replacement item is recognised directly from the code

Which SERTO codes and series are requested most often?

CodeDescription
SO 51021Straight tube fitting, stainless steel
SOL 51021Straight fitting, stainless steel L for high pressure
SO 51121Straight screw-in fitting, stainless steel
SO 51124Screw-in fitting with sealing edge, stainless steel
SO 51429Fitting for welding, stainless steel
SO 51521Straight panel-wall fitting, stainless steel
SO 41021Straight brass fitting, grade M
SO 21021Straight PVDF fitting
SO 22021PVDF elbow fitting
Q52Series of stainless steel quick couplings
Q51Series of stainless steel quick couplings
Q50+Series of stainless steel quick couplings

Where is SERTO equipment used?

  • Energy — fluid and instrumentation lines at generation plants
  • Marine — fittings and couplings for fluid lines
  • Transport — fittings for fluid lines
  • Industry — PVDF, brass and stainless steel fittings for process lines
  • High-tech industries — high-purity lines with UHP components

How do we supply SERTO in Romania?

We can quote SERTO tube fittings in stainless steel, brass, aluminium, PVDF and polyamide, quick couplings, valves, adapters and spare parts for fittings. For a correct quotation send the article code from the SO series, the material, the tube outside diameter, the thread type and the medium; for couplings, add the series and the working pressure. We supply to order, usually in 1–4 weeks, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is stated in the quotation.

Fittings combine correctly only with tube of the same diameter and material, and compatibility with existing parts is checked in the quotation.

Frequently asked questions about SERTO

What does SERTO make?

SERTO makes tube fittings in stainless steel, brass, aluminium, PVDF and polyamide, valves, quick couplings, UHP components, adapters, tubes and hoses. The company is based in Frauenfeld, Switzerland. Fittings are identified by the SO series and a five-digit article code.

How do I choose between the SO and SOL stainless steel versions?

The letter L marks the stainless steel version for high pressure, with the same geometry as the standard version, for example SO 51021 and SOL 51021. The choice depends on the working pressure and the tube diameter. Send the maximum pressure, the medium and the outside diameter, and we check the suitable version.

Do you supply SERTO in Romania and how fast?

Yes, fittings and couplings are supplied to order. The usual lead time is 1–4 weeks, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the exact lead time, by code, in the quotation.

Can I replace an old fitting with a SERTO one?

It depends on the existing series, the tube diameter and the thread type, metric or NPT. Compatibility is established after the item is checked. Send the code or a photo of the fitting and the thread measurements, and we check whether there is a suitable item in the SERTO range.

What data do I send for a Q52, Q51 or Q50+ quick coupling?

For quick couplings send the series, for example Q52, Q51 or Q50+, the material wanted (brass, stainless steel or PVDF), the connection type (SERTO, external thread, internal thread or panel), the working pressure and the medium. If you have the code from the current coupling, we use it directly.

How do I request a SERTO quotation?

Send the SERTO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SERTO AG (manufacturer documentation)