Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

PROTEGO supplier in Romania

For PROTEGO we quote BE/HR, BE/HK, FA-G and DR/ES flame arresters, VD/SV and DZ/E breather valves, PV/EB versions with a flame arrester and ER/V valves, based on the series on the nameplate and the tank data.

Founded in 1954 · Headquarters: Braunschweig, Germany

Request a quote

Who is PROTEGO and what does it make?

PROTEGO is a German manufacturer based in Braunschweig, active since 1954, which designs and makes flame arresters, breather (pressure-vacuum) valves and equipment for storage tanks. The range serves two purposes: stopping a flame that could pass through a vent or process line towards an explosive mixture, and limiting the pressure and vacuum in tanks, so that neither deformation of the wall nor product losses through emissions occur.

Flame arresters are divided by the type of phenomenon. Those for end-of-line deflagration (the BE/HR, BE/HK, BE/AD and LH/AD series) are fitted on the vents of tanks and equipment, in-line ones (FA-G, FA-E, FA-I) are fitted in pipes, and those for detonation (DR/ES, DA-G, DA-SB, DA-E) protect pipes in which combustion can turn into detonation. The element is a FLAMEFILTER® disc pack, with narrow gaps that remove thermal energy faster than the flame can sustain it, and the units are type-tested and have ATEX versions according to the manufacturer's documentation (potentially explosive atmospheres). Breather valves include VD/SV, V/SV, DZ/E and DV/ZT, valves with a flame arrester VD/TS, SV/E, PV/EB and P/EB, and the ER/V and ER/VH emergency valves release large volumes of vapour when the normal venting capacity is no longer sufficient.

For refineries, petroleum product depots, chemical and pharmaceutical plants, wastewater treatment plants, biogas installations and alcohol terminals in Romania, what matters is the gas group, the set pressure, the connection diameter and the material, so the quotation starts from the series on the nameplate or from the tank data sheet.

What do we supply from the PROTEGO range?

ProductDescription
End-of-line deflagration flame arresters (BE/HR, BE/HK, BE/AD, LH/AD)Fitted on the vents of tanks, vessels and equipment, to stop the transmission of a flame caused by atmospheric deflagration, short-time burning or endurance burning. They are made in versions for gas groups such as IIA, IIB1 and IIB3.
In-line flame arresters (FA-G, FA-E, FA-I) and detonation arresters (DR/ES, DA-G, DA-SB, DA-E)In-line arresters suppress deflagrations in pipes with explosive mixtures, and detonation arresters are made for flames at supersonic speeds and shock waves. Each unit is supplied with a declaration of conformity that defines the approved working conditions.
VD/SV, V/SV, DZ/E, DV/ZT breather valves and versions with a flame arresterPressure and vacuum valves for tanks, vessels and equipment, available as pressure, vacuum or combined valves, and as versions with a flame arrester (VD/TS, SV/E, PV/EB, P/EB), which limit product losses and tank deformation.
ER/V, ER/VH and ER/V-F emergency valvesThey release large volumes of vapour in case of exposure to external fire or a fault in the tank system, when ordinary breather valves can no longer provide venting; they are tested on a flow test rig.

Why PROTEGO?

  • Three types of flame arresters — end-of-line deflagration, in-line deflagration and detonation, each with dedicated series for the gas groups
  • FLAMEFILTER® element — a disc pack with narrow gaps, in a dedicated housing, type-tested, for explosion-risk zones, with a declaration of conformity according to the manufacturer's documentation
  • Breather valves with and without a flame arrester — VD/SV, V/SV and DZ/E, and VD/TS, SV/E and PV/EB respectively, for tanks of flammable liquids
  • ER/V and ER/VH emergency valves — tested on a flow test rig for large volumes of vapour in exceptional situations
  • Tank equipment — tank accessories, lightning protection and repair and maintenance services offered by the manufacturer

Which PROTEGO codes and series are requested most often?

CodeDescription
BE/HRFlame arrester for deflagration, end-of-line
BE/HKFlame arrester for deflagration, end-of-line
BE/ADFlame arrester for deflagration, end-of-line
LH/ADFlame arrester for deflagration, end-of-line
FA-GFlame arrester for deflagration, in-line
FA-EFlame arrester for deflagration, in-line
FA-IFlame arrester for deflagration, in-line
DR/ESFlame arrester for detonation
DA-GFlame arrester for detonation
VD/SVPressure-vacuum breather valve for tanks
V/SVPressure-vacuum breather valve
DZ/EPressure-vacuum breather valve
VD/TSPressure-vacuum valve with a flame arrester
PV/EBPressure-vacuum valve with a flame arrester
ER/VEmergency valve for tanks
ER/VHEmergency valve for tanks

Where is PROTEGO equipment used?

  • Oil and gas — crude oil and petroleum product tanks, terminals and refineries
  • Chemicals and pharmaceuticals — process tanks and equipment with flammable vapours
  • Biogas, waste and wastewater — pipes and tanks with explosive mixtures
  • Cryogenics, hydrogen and technical gases — protection of cryogenic tanks
  • Emissions and flare — flame arresters in vapour treatment installations

How do we supply PROTEGO in Romania?

We can quote PROTEGO products from the families of flame arresters (end-of-line, in-line and detonation), breather valves with and without a flame arrester and emergency valves, supplied to order. The units are usually supplied in 1–4 weeks from order, and large sizes and special designs can take longer. For a correct quotation send us the full series from the nameplate of the unit, the connection diameter, the gas group (IIA, IIB, IIC), the set pressure and vacuum, the temperature, the material and, where applicable, the venting flow required by the tank.

The gas group or set pressure of a unit is stated from the full series on the nameplate and the tank data; certifications are established on the specific version.

Frequently asked questions about PROTEGO

What does PROTEGO make?

Since 1954, PROTEGO has made flame arresters (for deflagration and detonation), pressure and vacuum breather valves, emergency valves and equipment for storage tanks in Braunschweig. The units protect installations with flammable liquids and gases against explosions, overpressure and hazardous emissions.

How do I choose between a deflagration arrester and a detonation arrester?

The end-of-line or in-line deflagration arrester stops flames at subsonic speeds, and the detonation arrester is for pipes in which combustion can become supersonic detonation. The choice depends on the pipe length, the gas group and the pressure. Send us the pipe diagram.

Do you supply PROTEGO products in Romania and how long does it take?

PROTEGO products are supplied to order. The usual lead time is 1–4 weeks; for large sizes or special designs, depending on the specification, it can be longer. A PROTEGO unit can ship in 24–72 h when the item is in stock, locally or at the supplier. We set the exact lead time in the quotation.

Can I replace an old PROTEGO breather valve with a current series?

This is checked from the full series on the nameplate, the connection diameter, the set pressure and vacuum, the material and the connection type. A direct replacement is confirmed after comparing these data; send us the nameplate and a photo of the installation on the tank.

What data do I need to send for a quotation on a PROTEGO flame arrester?

Send the series or type wanted, the pipe diameter, the gas group (IIA, IIB or IIC), the working pressure and temperature, the mounting location (end-of-line or in-line) and whether the unit must be ATEX certified. For breather valves add the set pressure and vacuum.

How do I request a PROTEGO quotation?

Send the PROTEGO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Braunschweiger Flammenfilter GmbH (manufacturer documentation)