Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Saunders supplier in Romania

For Saunders we quote weir-type (type A) and straight-through KB and K diaphragm valves, PFA-, glass- or hard natural rubber-lined variants and ES actuators; we need the body type, the diameter, the lining, the diaphragm and the fluid.

Request a quote

Who is Saunders and what does it make?

Saunders is the brand of industrial diaphragm valves for corrosive, abrasive or solids-laden fluids, manufactured in Cwmbran, Wales (United Kingdom), where the diaphragms are produced in an in-house rubber processing plant. The industrial range comprises manual valves and linear-actuated valves, in two constructions: weir type (type A, “weir”) and straight-through (types KB and K). Sealing is by the Saunders diaphragm, which shuts off the flow and fully controls emissions to the outside, which is why the valves work in chemicals, mining, water treatment, petrochemicals and power generation. For a quotation, send us the body type, the nominal diameter, the lining and the diaphragm material.

The choice is made by lining. PFA (perfluoroalkoxy) has the highest chemical resistance of the Saunders linings and is used with concentrated strong acids at high temperature and with aromatic, aliphatic and chlorinated solvents, with a weir body DN15–DN200 and a conductive variant on request. The blue borosilicate glass lining, offered since the 1950s, combines corrosion resistance with abrasion resistance: pickling lines in the steel industry, sulphuric acid and potassium chloride in fertiliser production, wet and dry chlorine in the pulp industry. Hard natural rubber (ebonite) covers dissolved salts, dilute acids, demineralised water, plating solutions and drinking water, with WRAS approval, in weir design DN20–DN500 or straight-through DN25–DN350.

There are also linings in soft natural rubber, butyl and polychloroprene, plus ETFE, PP and PVDF, and unlined bodies: cast iron with BS, ANSI or DIN flanges, weir type, DN15–DN250, and versions with threaded ends in bronze, cast iron or stainless steel. For automation there are the ES diaphragm actuators, modular, in three variants: spring-to-close (SC), spring-to-open (SO) and double acting (DA), up to DN250, with adjustable spring tension and a powder-coated aluminium-silicon housing. On replacement, the combination of body, lining and diaphragm matters, not just the diameter.

What do we supply from the Saunders range?

ProductDescription
Weir-type diaphragm valves (type A)The classic Saunders construction, with a weir in the body on which the diaphragm rests when closing. Supplied with PFA (DN15–DN200), glass, hard natural rubber (DN20–DN500) linings or unlined, in cast iron with DN15–DN250 flanges, with manual handwheel operation or with an actuator.
Straight-through diaphragm valves (KB and K)Body without a weir, with a straight flow section, for fluids with solids, sludges and abrasive slurries from mining and water treatment. Offered, for example, with hard natural rubber lining in DN25–DN350 or with borosilicate glass in DN25–DN150.
Valves lined with PFA, ETFE, PP, PVDF and glassLinings for aggressive chemistry: PFA for concentrated strong acids at high temperature and chlorinated solvents, with full polymer traceability, and blue borosilicate glass for media that are both corrosive and abrasive, such as pickling lines or wet chlorine.
ES actuators for diaphragm valvesModular pneumatic diaphragm actuators, in the SC (spring-to-close), SO (spring-to-open) and DA (double acting) variants, up to DN250. The spring tension is adjustable to optimise the closing force and the diaphragm life; a non-contact positioner is fitted for control.

Why Saunders?

  • Weir-type (type A) and straight-through (KB, K) valves — the body construction is chosen by fluid and by installation dimensions
  • Linings for every type of aggressiveness — PFA, ETFE, PP, PVDF, borosilicate glass and four types of rubber
  • Conductive PFA variant on request — for installations where the electrostatic charge must be discharged
  • Hard natural rubber with WRAS approval — the same valve can work on drinking water and on plating solutions
  • Modular ES actuators SC, SO and DA up to DN250 — automation is done without changing the valve body

Which Saunders codes and series are requested most often?

CodeDescription
ADiaphragm valve with weir in the body (“weir”), basic Saunders construction
KBStraight-through diaphragm valve, for slurries and sludges
KStraight-through diaphragm valve, K version
ES SCDiaphragm actuator, spring-to-close
ES SODiaphragm actuator, spring-to-open
ES DADiaphragm actuator, double acting
HRLHard natural rubber (ebonite) lining, with WRAS approval
SRLSoft natural rubber lining
PFAPFA-lined weir valve, DN15–DN200, conductive variant on request
Borosilicate glassBorosilicate glass-lined valve, weir or straight-through

Where is Saunders equipment used?

  • Chemicals and petrochemicals — PFA-lined valves for concentrated acids and aromatic or chlorinated solvents
  • Steel industry and metal processing — glass-lined valves on acid pickling lines
  • Fertiliser production — sulphuric acid and potassium chloride, on borosilicate glass valves
  • Water treatment — hard natural rubber valves for demineralised water, drinking water and dilute reagents
  • Mining — KB straight-through valves for abrasive slurries and sludges

How do we supply Saunders in Romania?

We can quote Saunders industrial diaphragm valves, weir-type or straight-through, in PFA, ETFE, PP, PVDF, glass or rubber linings, ES actuators and replacement diaphragms. For a correct quotation, send us the marking on the body or in the plant documentation, the nominal diameter, the connection type (BS, ANSI, DIN flanges or thread), the lining, the diaphragm material and the fluid data sheet with temperature and pressure. We bring in the valves and parts made to order, by import, usually in 1–4 weeks; a diaphragm or a valve can ship in 24–72 h when the item is available locally or at the supplier.

We focus on the Saunders industrial diaphragm range, and the suitable combination of lining and diaphragm is established together with you on the basis of the fluid data sheet.

Frequently asked questions about Saunders

What kind of valves are Saunders?

Saunders makes industrial diaphragm valves, manual or linear-actuated, weir-type (type A) or straight-through (KB and K). The bodies are supplied lined with PFA, ETFE, PP, PVDF, borosilicate glass or rubber, or unlined, in cast iron, bronze or stainless steel, for chemicals, mining and water treatment.

How do we choose the lining of a Saunders valve?

We start from the fluid, concentration and temperature. PFA is chosen for hot concentrated strong acids and chlorinated solvents, borosilicate glass when the medium is both corrosive and abrasive, and hard natural rubber for dissolved salts, dilute acids and drinking water. Send us the fluid data sheet and we propose the lining and the diaphragm.

How long do Saunders valves take to reach Romania?

We bring them in made to order, by import, usually in 1–4 weeks. A replacement diaphragm or a valve can ship in 24–72 h when the item is available locally or at the supplier. For large diameters, such as DN500 with ebonite, depending on the brand and the specifications, the lead time may be longer; we confirm it in the quotation.

Can you replace only the diaphragm, or the valve with another lining?

Yes. For the diaphragm we need the valve type and diameter and the material of the existing diaphragm. If you change the process fluid, we can quote the same body type with another lining, for example PFA instead of rubber, after we check compatibility against the fluid data sheet and the installation dimensions.

What data do I send for a quotation on Saunders valves?

The body type (weir or straight-through), nominal diameter, connection (BS, ANSI, DIN flanges or thread), lining, diaphragm material, actuation (manual or ES actuator SC, SO, DA), fluid, temperature and pressure. A photo of the nameplate and of the marking on the body helps us identify the version.

How do I request a Saunders quotation?

Send the Saunders code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 19 November 2026 · Sources: Crane ChemPharma & Energy (manufacturer documentation)