Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Stafsjö supplier in Romania

Knife gate valves for heavy industry

Headquarters: Stavsjö, Sweden

Request a quote

Who is Stafsjö and what does it make?

Stafsjö is a Swedish manufacturer specialising only in knife gate valves, headquartered in Stavsjö. The range covers over 15 series of gate valves, from small diameters of DN 50 (2") up to DN 1800 (72"), for industrial lines where the fluid contains fibres, sand or suspended solids and a ball or butterfly valve would quickly jam. The materials of construction include ductile iron, stainless steel and titanium (and, in some series, duplex steels), depending on how aggressive the medium is.

What sets Stafsjö apart in the category of industrial valves is its narrow specialisation in a single technology: the knife gate, optimised for cutting through and isolating fluids with a high solids content, with push-through variants for sludge (the SL series) and bidirectional lugged variants in ductile iron (the WB series) for complete isolation. The high-performance variants have working pressures of up to 50 bar.

In the pulp and paper industry, in mining or at wastewater treatment plants, Stafsjö makes sense where conventional valves clog or wear quickly because of abrasive particles in the fluid — sludge lines, pulp transport or circuits with solid waste.

What do we supply from the Stafsjö range?

ProductDescription
HG/HP/HX Series — High-Performance Gate ValvesKnife gate valves with full bore (through-going), for progressively higher pressures across the HG, HP and HX series, the latter dedicated to extreme-pressure applications. Stainless steel or ductile iron body for HG; stainless steel, duplex or titanium for HX. Send the diameter, the working pressure and the type of solids in the fluid so that the right series can be selected.
SL Series — Push-Through Valves for SludgeFamily of compact gate valves, with SLV, SLF, SLH and SLX variants depending on working pressure, designed for sewage sludge, industrial waste and fluids with a high concentration of solids. Push-through construction that reduces the risk of the gate jamming. The solids concentration must be confirmed for correct sizing.
WB Series — Bidirectional Lugged ValvesGate valves with lugged body, available in semi-lugged variants (WB, WB11), fully-lugged in ductile iron (WB14) and high-performance fully-lugged in stainless steel (WB14E). Suitable for complete bidirectional isolation on industrial lines. Specify the body material wanted and the nominal diameter.
JT/JTV/RKO Series — Valves for Junk TrapsValves dedicated to junk trap applications and high-density cleaners in the paper industry, with JT variants as a complete solution, JTV for high-density cleaners and RKO recommended for the same applications. Confirm the type of installation and the pipe diameter for a quotation.

Why Stafsjö?

  • Specialisation only in knife gate valves — optimised for fluids with a high solids content
  • Diameter range from DN 50 to DN 1800, covering both small lines and large industrial pipes
  • Push-through variants (SL series) for sludge and abrasive suspensions
  • Varied materials of construction — ductile iron, stainless steel, titanium, duplex — for media of different aggressiveness

Which Stafsjö codes and series are requested most often?

CodeDescription
D2GHigh-speed gate valve for reject separation
HGFull-bore gate valve, high performance
HLCompact gate valve for low pressure
HPFull-bore gate valve, high pressure
HPTTitanium gate valve, high pressure
HXGate valve for extreme pressure
JTComplete junk trap solution
JTVValve for junk traps and high-density cleaners
MVUnidirectional gate valve
RKOValve recommended for junk traps and cleaners
RKSRectangular stainless steel valve for powder and sludge
SLVCompact push-through valve for sludge
SLFPush-through valve for sludge
SLHHigh-pressure push-through valve for sludge
SLXPush-through valve for extreme pressures on sludge
TVCompact valve for isolating transmitters
WBSemi-lugged valve in ductile iron
WB11Semi-lugged valve, performance variant
WB14Bidirectional fully-lugged valve in ductile iron
WB14EFully-lugged stainless steel valve, high performance

Where is Stafsjö equipment used?

  • Paper and pulp industry — junk traps, high-density cleaners, pulp transport
  • Mining — isolation on lines with concentrated ore and abrasive tailings
  • Wastewater treatment — gate valves for sludge at treatment plants
  • Biomass energy — isolation on lines with fibrous materials
  • Chemical industry — gate valves resistant to corrosive fluids with solids
  • Food industry — stainless steel valves for lines with solids content

How do we supply Stafsjö in Romania?

We bring in Stafsjö gate valves for lines where the fluid contains solids, fibres or sludge and a conventional ball valve would not last long. To be upfront, we state the lead time and availability in the quotation — the technical information above comes from the technical documentation of the Swedish manufacturer. Delivery is to order, through suppliers in the European supply chain, usually in 1–4 weeks depending on the diameter and the material of construction chosen. For a quotation, tell us the nominal diameter, the working pressure and the type of solids in the fluid, so that we can recommend the right series (HG/HP/HX, SL or WB).

Titanium variants and diameters above DN 1200 are checked for each request, at the factory in Sweden.

Frequently asked questions about Stafsjö

What type of valves does Stafsjö make?

Stafsjö makes only knife gate valves, in over 15 series, for isolating fluids with a high solids content — sludge, paper pulp, concentrated ore. Diameters range from DN 50 to DN 1800, and the materials include ductile iron, stainless steel and titanium, depending on the application.

How do I choose the right Stafsjö series for my line?

The choice depends on the working pressure and the type of solids in the fluid: the HG/HP/HX series for increasing pressures, on concentrated pulp, sludge or granules, the SL series for sludge and waste, the WB series for complete bidirectional isolation. Send us the diameter, the pressure and the type of solids for a recommendation.

What variants does the Stafsjö SL series have?

The SL series has the SLV, SLF, SLH and SLX variants. The choice depends on the maximum pressure withstood and the materials available; we check the specifications together.

Do you supply Stafsjö valves in Romania?

Yes, to order, through a supply chain in the European Union; the lead time is usually 1–4 weeks, depending on the diameter and the material requested. We do not keep this range on the shelf, so every order is confirmed before the quotation.

What information do I send for a quotation for a Stafsjö gate valve?

Specify the nominal diameter, the working pressure, the type and concentration of solids in the fluid, plus the preferred body material (stainless steel or ductile iron). With these data we check the right series and the availability at the factory before sending the final quotation.

How do I request a Stafsjö quotation?

Send the Stafsjö code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 19 November 2026 · Sources: Stafsjö Valves AB (manufacturer documentation)