Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Willbrandt supplier in Romania

For Willbrandt we quote TYPE 40, TYPE 49 and TYPE 49 S rubber expansion joints, TYPE 200–207 stainless steel expansion joints and TYPE 81 PTFE expansion joints; we need the DN, pressure, temperature, medium and installation length.

Founded in 1892 · Headquarters: Hamburg, Germany

Request a quote

Who is Willbrandt and what does it make?

Willbrandt, a Hamburg company active since 1892, makes expansion joints for pipes — rubber, stainless steel, PTFE and non-metallic — plus stainless steel corrugated hoses and their accessories. Expansion joints absorb thermal expansion, vibration, structure-borne noise and settlement, protecting pipes, pumps and connections from overload. For a quotation, send us the expansion joint type (for example TYPE 49), the DN, the pressure, the temperature, the medium and the installation length.

Rubber expansion joints are made from EPDM, IIR, NBR, CSM or FPM, in universal, lateral, angular, pressure relieving or safety versions. Hand-wound variants, such as TYPE 40, range from DN 40 to DN 5000 and up to 100 bar, for power stations, industrial installations and main pipelines, while TYPE 39, with variable length, is designed for repairs and replacements. Moulded variants — TYPE 48 with very low inherent stiffness, TYPE 49 with short length, TYPE 49 S for the food industry, TYPE 51 for higher temperatures and pressures — cover small and medium diameters.

For high pressures and temperatures or for aggressive media, stainless steel expansion joints are used, with a corrugated bellows and steel or stainless steel ends. TYPE 200–205 are expansion joints for exhaust gases and flue gases, with weld ends, rotating flanges or fixed flanges, with or without an inner sleeve, and TYPE 206/207 are axial expansion joints with weld ends. PTFE expansion joints, for example TYPE 81 PTFE (DN 20–500), are chosen for high chemical resistance and in the food industry, where food conformity and non-stick properties matter.

What do we supply from the Willbrandt range?

ProductDescription
Hand-wound rubber expansion joints (TYPE 39, 40, 42)TYPE 40 is highly elastic and is made in a very wide variety of shapes, from DN 40 to DN 5000 and up to 100 bar, for power stations, industrial installations and main pipelines. TYPE 39 has variable length, for repairs, and TYPE 42 has support rings and lengths of 150–500 mm, for the paper industry.
Moulded rubber expansion joints (TYPE 46, 48, 49, 49 S, 51)TYPE 46 has a threaded connection, DN 20–50; TYPE 48 has very low inherent stiffness, DN 50–200 and a maximum of 16 bar, for steelworks; TYPE 49 has short length, DN 32–500; TYPE 49 S is for the food industry, and TYPE 51 for higher temperatures and pressures.
Stainless steel expansion joints (TYPE 200–207)Expansion joints with a stainless steel corrugated bellows and steel or stainless steel ends, for high pressures and temperatures or aggressive media. TYPE 200/201 have weld ends, TYPE 202/203 rotating flanges, TYPE 204/205 fixed flanges for flue gases; in these pairs, the odd-numbered variant has an inner sleeve. TYPE 206/207 are axial expansion joints with weld ends.
PTFE expansion joints (TYPE 81 PTFE)Moulded expansion joints made from extruded PTFE tube or, for higher pressures, from paste PTFE, which gives a uniform layer. TYPE 81 PTFE covers DN 20–500 and lengths of 40–320 mm, for chemical installations and for the food industry, where the non-stick property matters.

Why Willbrandt?

  • Five elastomers (EPDM, IIR, NBR, CSM, FPM) — the expansion joint material is matched to the medium and temperature
  • TYPE 40 hand-wound, DN 40–5000, up to 100 bar — large diameter expansion joints for power stations and main pipelines
  • TYPE 39 with variable length — suited to repairs and to replacing old expansion joints
  • Stainless steel expansion joints with inner sleeve (TYPE 201, 203, 205) — for exhaust gases and flue gases
  • TYPE 81 PTFE in two versions — extruded tube or paste PTFE for higher pressures, for aggressive chemical media

Which Willbrandt codes and series are requested most often?

CodeDescription
TYPE 39Hand-wound rubber expansion joint, variable length
TYPE 40Hand-wound rubber expansion joint, DN 40–5000, max. 100 bar
TYPE 42Rubber expansion joint with support rings, length 150–500 mm
TYPE 46Moulded expansion joint with threaded connection, DN 20–50
TYPE 48Moulded expansion joint with very low inherent stiffness, max. 16 bar
TYPE 49Highly elastic moulded expansion joint, short length, DN 32–500
TYPE 49 SExpansion joint for the food industry, DN 40–500
TYPE 200 / 201Stainless steel expansion joint for exhaust gases, weld ends
TYPE 204 / 205Stainless steel expansion joint for flue gases, fixed flanges
TYPE 81 PTFEPTFE expansion joint, DN 20–500

Where is Willbrandt equipment used?

  • Power stations — large diameter rubber expansion joints and flue gas expansion joints
  • Chemical industry — PTFE and elastomer expansion joints suited to aggressive media
  • Steel industry — TYPE 48 expansion joints with low inherent stiffness
  • Paper industry — TYPE 42 expansion joints with support rings
  • Food industry and water treatment — TYPE 49 S and PTFE expansion joints

How do we supply Willbrandt in Romania?

We can quote Willbrandt rubber, stainless steel and PTFE expansion joints, non-metallic expansion joints, stainless steel corrugated hoses, limit rods and support rings for vacuum. Send us the type (for example TYPE 49 or TYPE 204), the DN, the maximum pressure and temperature, the medium, the installation length, the flange standard and the movements the expansion joint has to absorb. Standard items that are available locally or at the supplier can arrive in 24–72 h; the others are brought in on order from the EU, usually in 1–4 weeks, and large hand-wound expansion joints may have, depending on the brand and the specifications, a longer lead time.

The service life of a rubber expansion joint is estimated once we have data on the medium, temperature, pressure and the actual movements of the pipe.

Frequently asked questions about Willbrandt

What does Willbrandt make?

Rubber, stainless steel, PTFE and non-metallic expansion joints, stainless steel corrugated hoses and accessories for expansion joints, alongside other technical products in rubber and plastics. The company has operated since 1892 and is headquartered in Hamburg, Germany.

How do I choose between a rubber, a stainless steel and a PTFE expansion joint?

Rubber absorbs large movements at a short length and reduces vibration and noise; the elastomer (EPDM, NBR, FPM and so on) is chosen according to the medium. Stainless steel is used at high pressures and temperatures or with aggressive media, for example in exhaust gases. PTFE is chosen when chemical resistance or non-stick properties matter. Send us the medium, the pressure and the temperature.

Do you supply Willbrandt expansion joints in Romania, and how quickly?

Yes. A standard expansion joint that is available locally or at the supplier can arrive in 24–72 h. The other versions come on order, through EU supply channels, usually in 1–4 weeks; large hand-wound expansion joints or those with special flanges may have a longer lead time, depending on the brand and the specifications.

Can I replace an old expansion joint while keeping the same installation length?

Yes, if we know the DN, the installation length, the flange standard, the pressure and the movements it absorbs. TYPE 39 has variable length and is designed for repairs and replacements, while TYPE 40 is made in a very wide variety of shapes. Send us the dimensions and a photo of the old expansion joint.

What data do I send for a quotation on a flue gas expansion joint?

The diameter, the temperature and pressure of the gases, the type of ends (weld, rotating or fixed flanges), the axial and lateral movements, the available length and whether an inner sleeve is needed. The stainless steel TYPE 200–205 series cover exhaust gases and flue gases, each type in three variants.

How do I request a Willbrandt quotation?

Send the Willbrandt code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 19 November 2026 · Sources: Willbrandt KG (manufacturer documentation)