Raptor Photonics supplier in Romania
For Raptor Photonics we quote Owl 640 II, Owl 1280 and Owl 2560 and Ninox 640 II SWIR cameras, with the Kestrel, Hawk and Eagle families; we need the spectral range, resolution, speed, interface and place of use.
Founded in 2006 · Headquarters: Larne, United Kingdom
Who is Raptor Photonics and what does it make?
Raptor Photonics is a manufacturer of digital low-light cameras from Larne, Northern Ireland, founded in 2006. We quote SWIR (short-wave infrared) cameras with an InGaAs (indium gallium arsenide) sensor and VIS-SWIR versions for scientific and industrial instruments. An InGaAs sensor sees where silicon no longer does, in the range from 0.6 to 1.7 µm, so it is used for inspecting semiconductor wafers and solar cells, for thermography, for hyperspectral imaging and for laser beam profiling.
The Owl family includes several models. Owl 640 II has 640×512 pixels of 15 µm, spectral range 0.6–1.7 µm, speed of up to 120 Hz, read noise below 50 electrons (rms), Camera Link output and C or M42 mount. Owl 1280 has 1280×1024 pixels of 10 µm, works at 10–60 Hz with the sensor stabilised at 15 °C, fanless, consumes under 3 W and has 12-bit Camera Link output. Owl 2560 reaches 2560×2048 pixels of 3.45 µm, in the 400–1700 nm range, with quantum efficiency of up to 75 % at 1200 nm, 60 Hz at full resolution and a CoaXPress interface. Ninox 640 II is cooled to −15 °C, with 14-bit Camera Link output, typical read noise of 18 electrons, dimensions of 87×79×79 mm and a mass of 550 g. The range also includes Kestrel eSWIR cameras, Hawk CMOS cameras, Eagle CCD cameras and Eagle XV and XO X-ray cameras.
Export of some models is subject to control by the British government and may require a licence. The quotation starts from the camera model, when completing an existing system, or from the spectral range, resolution, speed and interface, for a new inspection or measurement system.
What do we supply from the Raptor Photonics range?
| Product | Description |
|---|---|
| Owl 640 II | SWIR camera with a 640×512 pixel InGaAs sensor with 15 µm pitch, spectral range 0.6–1.7 µm, speed of up to 120 Hz and read noise below 50 electrons (rms). Camera Link output, C or M42 mount, automatic gain control and a large dynamic range in the same scene. |
| Owl 1280 | VIS-SWIR camera with a 1280×1024 pixel InGaAs sensor with 10 µm pitch, range 0.6–1.7 µm, operating at 10–60 Hz. The sensor temperature is stabilised at 15 °C, fanless, and the output is medium Camera Link at 12 bits, with consumption under 3 W and three-point non-uniformity correction. |
| Owl 2560 | Camera of 2560×2048 pixels with 3.45 µm pitch, sensitive between 400 and 1700 nm, with quantum efficiency of up to 75 % at 1200 nm. It operates at up to 60 Hz at full resolution, with a CoaXPress interface, automatic gain control and advanced video processing. |
| Ninox 640 II | SWIR camera cooled to −15 °C, with a 640×512 pixel InGaAs sensor, 15 µm pitch, range 0.6–1.7 µm, speed of up to 120 Hz and 14-bit Camera Link output. Typical read noise is 18 electrons, and the dimensions are 87×79×79 mm, at a mass of 550 g. |
Why Raptor Photonics?
- InGaAs from 0.6 to 1.7 µm — Owl 640 II, Owl 1280 and Ninox 640 II see beyond the visible range, for semiconductors and solar cells
- Resolutions from VGA to over 5 megapixels — 640×512 (Owl 640 II), 1280×1024 (Owl 1280) and 2560×2048 (Owl 2560)
- No fan on Owl 1280 — sensor stabilised at 15 °C and consumption under 3 W, for integration into equipment
- Cooling to −15 °C on Ninox 640 II — typical read noise of 18 electrons and dark current under 750 e-
- Industrial interfaces — Camera Link on Owl 640 II, Owl 1280 and Ninox 640 II, CoaXPress on Owl 2560
Which Raptor Photonics codes and series are requested most often?
| Code | Description |
|---|---|
| Owl 640 II | InGaAs SWIR camera, 640×512, 120 Hz |
| Owl 640 N | SWIR camera from the Owl 640 family |
| Owl 640 T | SWIR camera from the Owl 640 family |
| Owl 640 M | SWIR camera from the Owl 640 family |
| Owl 1280 | InGaAs VIS-SWIR camera, 1280×1024, fanless |
| Owl 2560 | Camera of 2560×2048, 400–1700 nm, CoaXPress |
| Ninox 640 II | SWIR camera cooled to −15 °C, 14-bit Camera Link |
| Ninox 1280 | SWIR camera from the Ninox family, 1280 class |
| Kestrel 640 eSWIR | eSWIR (extended SWIR) camera, 640 |
| Hawk 1920 | CMOS camera |
| Eagle 47-10 | 1 megapixel CCD camera |
| Eagle XV | X-ray camera, in vacuum |
Where is Raptor Photonics equipment used?
- Semiconductors — infrared inspection of wafers and devices
- Solar energy — inspection of solar cells
- Thermography and hyperspectral imaging — scientific and industrial instruments
- Research — astronomy, laser beam profiling, near-infrared imaging and fluorescence
How do we supply Raptor Photonics in Romania?
We can quote Raptor Photonics cameras from the Owl, Ninox, Kestrel, Hawk and Eagle families, starting from the model on the camera or from the application parameters. They are supplied to order, usually 1–4 weeks; depending on the specification, the lead time may be longer, especially if an export licence is required. For a correct quotation, send us the spectral range, the resolution and the speed wanted, the interface (Camera Link, CoaXPress, others), the lens mount, the cooling requirement and the place of use. For an existing system, add the camera model and the cables used.
Supply of a model subject to export control is set after the licence and the final destination are clarified.
Frequently asked questions about Raptor Photonics
What cameras does Raptor Photonics make?
Raptor Photonics makes digital low-light cameras: SWIR and VIS-SWIR with InGaAs from the Owl, Ninox and Kestrel families, Hawk CMOS cameras, Eagle CCD cameras and X-ray cameras. The company, founded in 2006, is based in Larne, Northern Ireland.
How do I choose between Owl 640 II, Owl 1280 and Owl 2560?
The choice depends on resolution and spectral range: Owl 640 II has 640×512 pixels at 120 Hz, Owl 1280 has 1280×1024 pixels without a fan, and Owl 2560 has 2560×2048 pixels in the 400–1700 nm range. Send us the application, the field of view and the interface wanted.
Do you supply Raptor cameras in Romania and how fast?
The cameras are supplied to order, usually in 1–4 weeks. A model can ship in 24–72 h when the item is in stock, locally or at the supplier. Some models require an export licence, and depending on the specification the lead time may be longer.
Can an older Raptor camera be replaced with a current model?
This is checked on the basis of the model, the interface, the mount and the control software. Compatibility is checked model by model rather than by family; send us the camera model, the cables and the acquisition board used and the spectral range, and we show which current version fits without changing the system.
What data do I need to send for a quotation on a SWIR camera?
Send the spectral range, the resolution and the speed wanted, the interface (Camera Link, CoaXPress), the lens mount, whether you need cooling, the permitted dimensions and consumption and the final destination of the camera, for export control. For an existing system, add the camera model.
How do I request a Raptor Photonics quotation?
Send the Raptor Photonics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 22 November 2026 · Sources: Raptor Photonics Limited (manufacturer documentation)

