Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Teledyne DALSA supplier in Romania

Linea, Genie Nano and Falcon4 industrial cameras, Z-Trak 3D sensors and Xtium boards

Founded in 1980 · Headquarters: Waterloo, Canada

Request a quote

Who is Teledyne DALSA and what does it make?

Teledyne DALSA, formerly DALSA Corporation, was founded in 1980 in Waterloo, in the province of Ontario. It started from CCD image sensors, and today it makes industrial cameras, 3D laser profiling sensors, image acquisition boards (frame grabbers) and vision software. For a production line engineer, this means that a single family can supply both the camera and the board in the computer that receives the image, so the camera–board pair is designed together.

The Linea line-scan cameras have their own 2k or 4k sensors (and resolutions up to 16k), and TurboDrive technology allows transfer at speeds well above the limit of ordinary GigE, without changing the network. The Linea HS2 reaches resolutions of 8k or 16k, with a line rate of up to 1 MHz, on two Camera Link HS interfaces. The Genie Nano area-scan cameras have resolutions from 3.2 to 45 MP, and the Falcon4-CLHS goes from 2.8 to 67 MP. In 3D, the Z-Trak2 delivers up to 45,000 profiles per second, with a blue or red laser, and the Z-Trak Express 1K5 covers a horizontal field of view of up to 1,700 mm.

The products are aimed at builders of inspection machines, vision system integrators and continuous-material lines, from metal and wood to batteries. The choice starts from the scan type, resolution, line or frame speed and the interface between the camera and the computer.

What do we supply from the Teledyne DALSA range?

ProductDescription
Linea and Linea HS2CMOS line-scan cameras. The Linea has resolutions from 2k to 16k and line rates of up to 80 kHz with TurboDrive; the Linea HS2 uses a TDI sensor with 8k or 16k resolution and a dual Camera Link HS interface.
Genie NanoCompact area-scan cameras with GigE Vision, in 1GigE, 5GigE, 10GigE, Camera Link and CoaXPress versions. The 5GigE models cover resolutions between 3.2 and 45 MP, with accelerated transfer through TurboDrive.
Z-Trak2 and Z-Trak Express 1K53D laser profilers. The Z-Trak2 has a 5GigE interface, up to 45,000 profiles/s and 2K points per profile; the Express 1K5 offers 5,000 profiles/s over a field of view of up to 1,700 mm.
Xtium3 and Falcon4-CLHSThe Xtium3-CLHS PX8 is a Camera Link HS acquisition board with 7 channels of 12.5 Gbps; the Falcon4-CLHS is a series of global shutter cameras, from 2.8 to 67 MP, with frame rates of up to 1,200 fps.

Why Teledyne DALSA?

  • Camera and acquisition board pairs from the same family — Linea HS2 with Xtium3-CLHS, for very high data rates
  • TurboDrive on Linea and Genie Nano — transfer at speeds well above the ordinary GigE limit, without changing the network
  • Genie Nano 5GigE — resolutions of 3.2–45 MP over the 5GBASE-T link, as a replacement for existing GigE Vision cameras
  • Factory-calibrated Z-Trak 3D sensors — IP67 housing, blue or red laser and 2K points per profile on the Z-Trak2
  • Linea HS2 with a TDI BSI sensor — low-light imaging at 8k or 16k, with a line rate of up to 1 MHz

Which Teledyne DALSA codes and series are requested most often?

CodeDescription
LineaGigE line-scan camera, 2k–16k, up to 80 kHz
Linea HS2TDI line-scan camera 8k/16k, up to 1 MHz, CLHS
Linea LiteLine-scan camera from the Linea family
Piranha4Line-scan camera from the Teledyne DALSA range
Genie Nano-5G5GigE area-scan camera, 3.2–45 MP
Genie Nano 1GigECompact GigE Vision area-scan camera
Genie Nano 10GigE10GigE area-scan camera
Genie Nano CXPCoaXPress area-scan camera
Falcon4-CLHS M2240High-speed camera, global shutter, Camera Link HS
Falcon4-CLHS M8200High-resolution camera, up to 90 fps
Z-Trak25GigE 3D sensor, IP67, blue or red laser
Z-Trak Express 1K53D profiler, 5,000 profiles/s, 1,700 mm field of view
Xtium3-CLHS PX8CLHS acquisition board, 7 channels, PCIe Gen4 x8
Xtium2Family of acquisition boards, CoaXPress and Camera Link

Where is Teledyne DALSA equipment used?

  • Inspection of continuous materials — metal, paper and wood with Linea line-scan cameras
  • Battery manufacturing — in-line 3D measurement with Z-Trak Express profilers
  • Automotive — inspection of parts and surfaces with 3D sensors
  • Semiconductors and electronics — high-resolution inspection with Falcon4-CLHS and Genie Nano
  • Logistics and packaging — measurement of dimensions and volume on pallets

How do we supply Teledyne DALSA in Romania?

We can quote Teledyne DALSA cameras from the Linea, Genie Nano and Falcon4 families, Z-Trak sensors and Xtium boards, supplied to order. The lead time to order is usually 1–4 weeks; for high-resolution models, 3D systems or multi-sensor configurations it may be longer, and the exact lead time appears in the quotation. For a correct enquiry we need the full code of the camera or board, the interface (GigE, CLHS, CoaXPress), the scan type, the resolution, the line or frame rate and, for 3D, the measuring range and the laser wanted. For replacements, also send the series of the current equipment.

Whether an Xtium board and a camera from different series work together is determined from the compatibility list for the exact models, and software licences are handled separately.

Frequently asked questions about Teledyne DALSA

What does Teledyne DALSA make?

Teledyne DALSA, founded in 1980 in Waterloo, Canada, makes industrial area-scan and line-scan cameras, 3D laser profiling sensors, image acquisition boards and vision software, plus image sensors and MEMS components. Well-known cameras include Linea, Genie Nano, Falcon4 and Z-Trak.

How do I choose between Linea and Genie Nano?

The Linea is line-scan, suited to belts and continuous materials, while the Genie Nano is area-scan, for full-frame images. Send us the line or object speed, the width to inspect, the smallest detail to detect and the interface available in the computer.

Can you supply Teledyne DALSA products in Romania and in what time?

For Teledyne DALSA, they are supplied to order, usually in 1–4 weeks. 3D sensors, very high-resolution cameras and acquisition boards with a special configuration may have longer lead times, given in the quotation.

Can I replace a Genie Nano GigE camera with a 5GigE model?

5GigE models can be an alternative to existing GigE Vision cameras, but the 5GBASE-T link needs a compatible network card. The match is confirmed after checking; send us the code of the current camera and the network card in the computer.

What data do you need for a quotation on a Z-Trak 3D sensor?

The size of the object, the horizontal field of view needed, the height resolution, the belt speed, the surface type (glossy or matt) and the laser wanted, blue or red. If you use several sensors, state how they are arranged on the line.

How do I request a Teledyne DALSA quotation?

Send the Teledyne DALSA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Teledyne DALSA, Wikipedia, Teledyne Vision Solutions (manufacturer documentation)