JAI supplier in Romania
For JAI we quote Go-X, Spark, Sweep, Fusion, Apex and Wave industrial cameras, with Pregius, prism or InGaAs sensors, based on the camera code, the interface and the speed required in the inspection system.
Headquarters: Copenhagen (Valby), Denmark
Who is JAI and what does it make?
JAI is a Danish manufacturer of industrial cameras for machine vision, headquartered at Valby, in Copenhagen, with more than 60 years in the imaging industry. The company has sold over a million cameras and makes models with progressive CMOS sensors, including near-infrared, short-wave infrared (SWIR) and ultraviolet, with resolutions of up to 45 megapixels. It also has multi-sensor prism cameras, in area scan and line scan versions. The interfaces supported are Camera Link, GigE Vision, CoaXPress and USB3 Vision.
The catalogue is organised by series. Go-X brings together compact area scan cameras, with Sony Pregius and Pregius S sensors, resolutions from 2.3 to 24.5 megapixels and USB3 Vision, GigE Vision or CoaXPress interfaces; Spark is the high-resolution, high-speed series, with 45 MP models at over 50 frames per second; Sweep covers monochrome, bilinear and trilinear line scan cameras, from 2K to 16K pixels; Fusion and Apex are prism cameras with two and three sensors respectively, and Wave offers SWIR cameras with an InGaAs sensor.
In Romania, JAI cameras appear in inspection systems on packaging lines, in food, electronics, inspection of continuous surfaces (strips, films, paper) and sorting, usually as part of a system supplied by an integrator. For replacement, the sensor, resolution, interface and lens mount matter, which is why the quotation starts from the full camera code and its application.
What do we supply from the JAI range?
| Product | Description |
|---|---|
| Go-X — compact area scan cameras | Cameras with resolutions of 2.3 to 24.5 MP, Sony Pregius and Pregius S sensors, shock and vibration resistance of 80G/10G and USB3 Vision, GigE Vision or CoaXPress interfaces, for inspection systems that run continuously. |
| Spark — high-resolution area scan | Cameras with global shutter CMOS sensors, with speeds of up to ten times higher than traditional CCD cameras: the 45 MP models exceed 50 frames per second, and some 5 MP models reach 250 frames per second or more. |
| Sweep — line scan cameras | Monochrome, bilinear and trilinear line scan cameras, with resolutions of 2K, 4K, 8K and 16K, 10GBASE-T, CoaXPress CXP-12 and Camera Link interfaces, pixel corrections and high scanning speeds for the inspection of strips and continuous surfaces. |
| Wave, Fusion and Apex | Wave comprises area scan (WAA) and line scan (WAL) SWIR cameras with an InGaAs sensor; Fusion is the series with two sensors, and Apex the series with three RGB CMOS sensors with a prism, for faithful colour and multispectral imaging. |
Why JAI?
- A camera for every role — area scan (Go-X, Spark), line scan (Sweep), prism (Fusion, Apex) and SWIR (Wave), all in the same offer
- Sony Pregius and Pregius S sensors in Go-X — resolutions from 2.3 to 24.5 MP and USB3 Vision, GigE Vision or CoaXPress interfaces
- High speeds at high resolution — Spark reaches over 50 frames per second on the 45 MP models
- Prism cameras for faithful colour — Apex with three CMOS sensors offers better colour fidelity than classic Bayer cameras
- SWIR with an InGaAs sensor in the Wave series — detects moisture, material variations and defects invisible in visible light
Which JAI codes and series are requested most often?
| Code | Description |
|---|---|
| Go-X | Series of compact area scan cameras, 2.3–24.5 MP |
| Go | Small-size area scan cameras |
| Spark | High-resolution, high-speed cameras, up to 45 MP |
| Sweep trilinear | Colour trilinear line scan cameras, 2K–16K |
| Sweep bilinear | Bilinear line scan cameras |
| Sweep monocrom | Monochrome line scan cameras |
| Sweep+ | Prism line scan cameras, including SWIR with two InGaAs sensors |
| Fusion | Prism cameras with two sensors, colour and NIR |
| Apex | Prism cameras with three RGB CMOS sensors |
| Wave WAA | Area scan SWIR camera, 400–1700 nm |
| Wave WAL | Line scan SWIR cameras, 12.5 μm pixels |
Where is JAI equipment used?
- Packaging and print inspection — area scan and line scan cameras for checking labels and printing
- Food and beverages — sorting with RGB and SWIR cameras
- Electronics, boards and wafers — surface and defect inspection
- Surface and continuous inspection — strips, films and moving materials
- Pharmaceuticals, cosmetics and traffic — Spark and Go-X cameras for outdoor applications
How do we supply JAI in Romania?
We can quote JAI cameras from the Go-X, Spark, Sweep, Fusion, Apex and Wave series, supplied to order. The lead time is usually 1–4 weeks to order; for multi-sensor or SWIR cameras, the lead time can be longer. For a correct quotation, send us the full camera code, the sensor type and resolution, the interface (USB3 Vision, GigE Vision, CoaXPress or Camera Link), the lens mount, the speed of the line or of the objects and the lighting used in the inspection system.
The compatibility of a camera with a video acquisition board (frame grabber) or an existing software is established on the basis of the interface, the driver and the system configuration.
Frequently asked questions about JAI
What does JAI make?
JAI makes industrial cameras for machine vision: area scan and line scan, with a single sensor or with a prism and several sensors, in visible, NIR, SWIR and UV versions. The company is headquartered at Valby, in Copenhagen, and has subsidiaries in several European countries, in Asia and in the USA.
How do I choose between an area scan camera and a line scan camera?
The area scan camera captures a whole frame and suits discrete objects or slow lines, while the line scan camera scans the moving material, suited to strips, films and continuous surfaces. Send us the speed, the width to be inspected, the resolution required and the preferred interface.
Do you supply JAI cameras in Romania and how fast?
JAI cameras are supplied to order, with a lead time usually of 1–4 weeks; multi-sensor and SWIR models may need more time. We set it in the quotation, after checking the full camera code and the interface required.
Can I replace an old JAI camera with a current model?
This can be checked on the basis of the full code, the sensor, the resolution, the interface, the lens mount and the software used. A direct replacement between series is confirmed after comparing these data; send the code from the camera and a description of the system in which it is installed.
What do I need to send for a quotation for a JAI industrial camera?
Send the code or series, the scan type (area or line), the resolution, the frame or line rate, the interface, the lens mount, the spectral range (visible, NIR or SWIR) and the lighting. For replacements add the video acquisition board (frame grabber) and the acquisition software used.
How do I request a JAI quotation?
Send the JAI code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 22 November 2026 · Sources: JAI A/S (manufacturer documentation)

