Pompe Rotomec supplier in Romania
For Rotomec we quote TF and TFX vortex submersible pumps, BT two-channel impeller pumps, DIVOREX grinder pumps and KS horizontal pumps; we need the type from the nameplate, the motor power, the discharge diameter and the nature of the water.
Founded in 1977 · Headquarters: Cernusco sul Naviglio, Italy
Who is Pompe Rotomec and what does it make?
Rotomec (Pompe Rotomec) is an Italian company in Cernusco sul Naviglio, near Milan, that has developed pumps and equipment since 1977 for the transfer and treatment of wastewater in the civil, industrial, environmental and livestock fields. The range is built around submersible pumps for loaded water, complemented by horizontal pumps for sludge, submersible mixers, aeration systems and pre-assembled pumping stations. In operation, the advantage is that the same equipment family covers the pumping station, the equalisation tank and the sludge line of a treatment plant.
Submersible pumps are chosen according to the load of the water. The CF-CV, V, VR and VX series serve small lifts, and the DIVOREX grinder pump serves pressurised sewers on small-diameter pipes, where the cutting device shreds solids, at 1–8 l/s and 5–62 m. The T series has the TR, TL and TF pumps, and the TF and TFX have a vortex impeller: the TF, in G25 cast iron, pumps domestic wastewater, rainwater, sludge and non-corrosive industrial wastewater, and the TFX, in AISI 316 stainless steel, handles water with a lot of sludge, seawater and aggressive effluents, with flows of 1–39 l/s and heads of 0.5–28 m. For sewerage there is the RS series, with a vortex impeller, from DN 50 to DN 200, and the BT series, from DN 80 to DN 300, with a two-channel impeller and a self-cleaning diffuser, for bulky solids, fibrous materials and sediments fermented with gases, including in a chopper variant, with a cutting diffuser and a hardened impeller.
The KS and KSM horizontal pumps have a vortex impeller, and the KB and KBM an open two-channel impeller. The KS is single-stage, with axial suction and a removable support foot that allows the discharge flange to be oriented in three positions, for flows up to 140 l/s, heads up to 43 m and motors of 1.5–30 kW, and it transfers sludge and suspensions in treatment, in industrial processes, and in the food, sugar and paper industries. The treatment line includes the ECO-MIX submersible mixers, the ECOGET ejector aerators and the AIRGET radial aerators, and the SOLLBOX-MAXISET pre-assembled stations are completed with hydraulic accessories, float level switches and control panels. For a quotation, send us the series and the discharge diameter, for example TFX DN 65, the motor power and the voltage.
What do we supply from the Pompe Rotomec range?
| Product | Description |
|---|---|
| TF and TFX vortex submersible pumps | Submersible pumps with a vortex impeller for domestic wastewater, rainwater, sludge and non-corrosive industrial wastewater (TF, in G25 cast iron) or for water with a lot of sludge, seawater and aggressive effluents (TFX, in AISI 316 stainless steel), with flows of 1–39 l/s, heads of 0.5–28 m, motors of 1.1–4 kW and DN 50–100 discharge. |
| BT submersible pumps, with two-channel impeller | Pumps for sewerage with bulky solids, fibrous materials and sediments fermented with gases, with a two-channel impeller and a self-cleaning diffuser, from DN 80 to DN 300. The chopper variant has a cutting diffuser and a hardened impeller; at DN 150, the 6-pole version reaches 95 l/s. |
| DIVOREX grinder pumps | Submersible pumps with an open impeller and a cutting device, for pressurised sewers with small-diameter pipes. They shred solids and prevent clogging, at flows of 1–8 l/s, heads of 5–62 m and motors of 0.9–9.5 kW, with 1¼″, 1½″ or DN 50 PN10 discharge. |
| KS and KSM horizontal pumps | Single-stage horizontal centrifugal pumps, with axial suction and a vortex impeller, for sludge and suspensions in environmental, industrial process, food, sugar and paper applications. The KS reaches 140 l/s, 43 m and 30 kW, with DN 50–200 discharge and a flange that can be oriented in three positions. |
Why Pompe Rotomec?
- Vortex impeller on the TF, TFX and KS series — suitable for water with solids and for sludge
- TFX in AISI 316 stainless steel — for seawater, water with a lot of sludge and aggressive effluents
- Chopper variant in the BT series — cutting diffuser and hardened impeller for water with fibres
- DIVOREX with a cutting device — pressurised sewerage on small-diameter pipes, up to 62 m
- KS horizontal pump with the discharge flange in three positions — installation adapted to the existing layout
Which Pompe Rotomec codes and series are requested most often?
| Code | Description |
|---|---|
| CF-CV | Submersible pump for small lifts |
| VX | Submersible pump for small lifts |
| DIVOREX | Submersible grinder pump, 1–8 l/s, up to 62 m |
| TR | Submersible pump from the T series |
| TL | Submersible pump from the T series |
| TF | Submersible pump with vortex impeller, G25 cast iron |
| TFX | Submersible pump with vortex impeller, AISI 316 stainless steel |
| RS DN 80 | Submersible pump from the RS series, DN 80 discharge |
| BT DN 150 | Submersible pump with two-channel impeller, DN 150 |
| KS | Horizontal pump with vortex impeller, up to 140 l/s |
| KSM | Horizontal pump with vortex impeller |
| KB | Horizontal pump with open two-channel impeller |
| ECO-MIX | Submersible mixer |
| ECOGET | Ejector aerator |
| AIRGET | Radial aerator |
| SOLLBOX-MAXISET | Pre-assembled pumping station |
Where is Pompe Rotomec equipment used?
- Treatment plants — submersible pumps, ECO-MIX mixers and ECOGET aerators
- Sewerage and pumping stations — BT and RS pumps and DIVOREX grinders
- Food, sugar and paper industry — KS horizontal pumps for sludge and suspensions
- Livestock — transfer of wastewater from animal farms
- Seawater and aggressive effluents — TFX pumps in AISI 316 stainless steel
How do we supply Pompe Rotomec in Romania?
We can quote Rotomec submersible pumps from the T, RS and BT series, DIVOREX grinder pumps, KS and KB horizontal pumps, ECO-MIX mixers, ECOGET and AIRGET aerators, and accessories for pumping stations. For an accurate quotation, send us the type from the nameplate, the motor power and voltage, the discharge diameter and, for a new application, the flow, the pumping head and the nature of the water (with fibres, sand, sludge or seawater). We supply the pumps to order, usually in 1–4 weeks; a pump can ship in 24–72 h when the item is in stock, locally or at the supplier. For large pumps and pre-assembled stations, depending on the specification, the lead time can be longer.
For a new tank, mixers and aerators are selected based on the volume and the oxygen requirement set by the designer, and installation on guide rails remains with the station builder.
Frequently asked questions about Pompe Rotomec
What does Rotomec do?
Since 1977, Rotomec has developed in Italy pumps and equipment for the transfer and treatment of wastewater: submersible pumps for loaded water from the T, RS and BT series, DIVOREX grinder pumps, KS and KB horizontal pumps for sludge, ECO-MIX submersible mixers, ECOGET and AIRGET aerators and SOLLBOX-MAXISET pre-assembled pumping stations.
How do I choose between a TF and a TFX pump?
Both have a vortex impeller and work at flows of 1–39 l/s and heads of 0.5–28 m. The TF is in G25 cast iron and pumps domestic wastewater, rainwater, sludge and non-corrosive industrial wastewater. The TFX, in AISI 316 stainless steel, is chosen for water with a lot of sludge, seawater and aggressive effluents. Send us the composition of the water and its temperature.
Do you supply Rotomec pumps in Romania and within what lead time?
Yes, to order. For submersible pumps and common parts, the usual lead time is 1–4 weeks, and the order can ship in 24–72 h when the item is in stock, locally or at the supplier. Large horizontal pumps, mixers and pre-assembled stations can have a longer lead time, depending on the specification, which we state in the quotation.
Which Rotomec pump do I choose if my current pump clogs often?
It depends on the nature of the water. If the water has fibres and bulky solids, we look at the BT series in the chopper variant or a pump with a vortex impeller; for pressurised sewers on small pipes, the DIVOREX. We need the flow, the pumping head, the discharge diameter, the installation depth and a description of what exactly clogs the current pump.
What do I send for a quotation on a Rotomec mixer or aerator?
For an ECO-MIX mixer or an ECOGET aerator, send us the dimensions and shape of the tank, the water depth, the role of the tank in the process, the oxygen requirement if you have it from the designer, and the available voltage. When replacing existing equipment, the type from the nameplate and the motor power are enough.
How do I request a Pompe Rotomec quotation?
Send the Pompe Rotomec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Pompe Rotomec (manufacturer documentation)

