Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Straub supplier in Romania

Flexible weld-free couplings for joining pipes

Headquarters: Wangs, Switzerland

Request a quote

Who is Straub and what does it make?

Straub is a Swiss manufacturer of pipe couplings, headquartered in Wangs, specialising in weld-free joints for metal and plastic pipes. The range includes couplings with axial restraint (which withstand the tensile force of the pipe) and couplings without axial restraint, more flexible to install. We can quote Straub couplings for water pipes, industrial applications and marine installations, where welding is not possible or not desired.

The difference from a classic welded or flanged coupling is installation speed: a Straub joint is tightened with wrenches, with no heat source and no special preparation of the pipe ends. The STRAUB-GRIP series covers diameters from 25 to 711.2 mm with full axial restraint, while STRAUB-METAL-GRIP and STRAUB-PLAST-GRIP are variants dedicated to metal and plastic pipes respectively. The STRAUB-FLEX family, without axial restraint, is designed for installations where the pipe is already secured by other means.

For installers and designers in Romania, Straub couplings are useful for quick repair of water and utility pipes, for temporary connections on building sites and for installations where welding would be cumbersome or risky because of the pipe material or the working environment.

What do we supply from the Straub range?

ProductDescription
STRAUB-GRIPCoupling with full axial restraint, for diameters from 25 to 711.2 mm, suitable for pipes subject to tensile forces or variable internal pressure. Used on drinking water pipes, industrial pipes and in installations where pipe movement or vibration could loosen a simple joint. The customer must provide the real outside diameter of the pipe and its material for correct selection of the gasket.
STRAUB-METAL-GRIPVariant dedicated to metal pipes, with axial restraint. Typical application: repairing or extending steel or cast iron pipes in water networks and industrial utilities, without dismantling the existing section. Requires the exact diameter and the working pressure of the pipe for correct sizing of the coupling.
STRAUB-PLAST-GRIPCoupling adapted to plastic pipes, for diameters between 40 and 355 mm. Used in irrigation networks, industrial water and plastic pipes where electrofusion welding is not practical or possible on site. The customer must specify the exact type of plastic and the nominal diameter.
STRAUB-FLEXFamily of couplings without axial restraint, easier to install where the pipe is already mechanically anchored by other means. Typical application: temporary connections, quick repairs or installations where the working space is limited. The customer must confirm whether the installation already has separate axial fixing before choosing this variant instead of a STRAUB-GRIP.

Why Straub?

  • Weld-free installation: mechanical joint made with wrenches, with no source of fire or special pipe preparation
  • Wide range of diameters, from 25 mm to over 711 mm, covering both small pipes and mains
  • Axial and non-axial variants: choice depending on how the pipe is already secured
  • Compatible with various materials: couplings dedicated to steel, cast iron, plastic and mixed combinations

Which Straub codes and series are requested most often?

CodeDescription
STRAUB-GRIPAxial restraint coupling for pipes with diameters between 25 and 711 mm
STRAUB-GRIP FFFF variant of the STRAUB-GRIP axial restraint coupling (25–406.4 mm)
STRAUB-METAL-GRIPMetal axial restraint coupling for diameters between 30 and 609 mm
STRAUB-METAL-GRIP FFFF variant of the metal axial restraint coupling (30–457.2 mm)
STRAUB-PLAST-GRIPAxial restraint coupling for plastic pipes, diameters between 40 and 355 mm
STRAUB-COMBI-GRIPAxial restraint coupling for pipe ends with different diameters
STRAUB-FLEXFlexible coupling without axial restraint, for joints without mechanical stress
STRAUB-OPEN-FLEXFlexible coupling with open construction for very large diameters
STRAUB-STEP-FLEXFlexible coupling for transition between two different pipe diameters
STRAUB-SQUARE-FLEXFlexible coupling for square tubing, with sections of 60 to 100 mm
STRAUB-REP-FLEXFlexible coupling used for quick repair of damaged pipes
STRAUB-CLAMPClamp-type collar, available in one-piece or two-piece versions

Where is Straub equipment used?

  • Water and utilities: pipe repairs and extensions without welding
  • Shipbuilding and offshore: quick joints in tight spaces
  • Renewable energy: pipe joints, a field mentioned by the manufacturer
  • General industry: process pipes where welding is not permitted or practical

How do we supply Straub in Romania?

The technical parameters for Straub couplings come from the technical documentation of the Swiss manufacturer, and we check the exact availability of each diameter only on request. We bring in Straub couplings to order, typically within 1–4 weeks. For an accurate quotation we need the real outside diameter of the pipe, its material and the working pressure. Stock availability is confirmed diameter by diameter, especially for the large ones, over 400 mm.

Large diameters (over 400 mm) and special configurations for aggressive chemical environments are ordered after prior confirmation of availability.

Frequently asked questions about Straub

What is the difference between STRAUB-GRIP and STRAUB-FLEX couplings?

STRAUB-GRIP belongs to the axial restraint family, meaning it secures the two pipe ends and absorbs the longitudinal forces from pressure or vibration. STRAUB-FLEX is a coupling without axial restraint, designed for joints that must remain mechanically free, without transmitting additional stress between segments. The right choice depends on whether the pipe in question has another fixing point capable of absorbing the axial force.

Do you supply STRAUB couplings in Romania?

Yes, we bring in to order couplings from the STRAUB-GRIP, STRAUB-METAL-GRIP or STRAUB-FLEX ranges, starting from the exact diameter of the existing pipe. This range of couplings is not kept in our own stock; we bring it in to order, and the expected time is typically 1–4 weeks, according to the manufacturer's technical documentation. We recommend sending the outside diameter measured directly on the pipe, because many variants cover close diameter ranges.

What information is needed for a STRAUB coupling quotation?

The exact outside diameter of the pipe is needed, measured with a ruler or a measuring tape, as well as the material and the wall thickness of the pipe. For axial restraint couplings the working pressure of the installation also matters, and for the flexible variants it is useful to know whether the two ends already have another fixing point. A photo of the joint area helps in choosing the right model quickly.

How do I request a Straub quotation?

Send the Straub code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: STRAUB, STRAUB Werke AG (manufacturer documentation)