Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SUPCON supplier in Romania

For SUPCON we quote modules and components from the ECS-700 DCS, the Webfield TCS-900 and TCS-500 SIS, and the G5Pro and G3Smart PLCs, based on the signal list, the SIL level and the plant protocols.

Headquarters: Hangzhou, China

Request a quote

Who is SUPCON and what does it make?

SUPCON, headquartered in Hangzhou, is a Chinese manufacturer of automation systems for the process industry. The range covers distributed control systems (DCS), safety instrumented systems (SIS), programmable logic controllers (PLC), the UCS universal control system, control valves and field instruments. For an automation engineer in a chemical, petrochemical or oil and gas plant, the control and safety families are of particular interest, because they replace or extend existing systems.

In the DCS area there are ECS-700, a system for large and complex plants, with operator stations, engineering stations, a data historian, OPC and asset management, and JX-300XP, a system for small and medium plants, with intelligent management of field devices. The protocols include HART, FF, Modbus, PROFIBUS, OPC UA, PROFINET and EtherNet/IP. For safety, Webfield TCS-900 has versions with functional safety, according to the manufacturer's documentation, with dual controllers in a triple modular redundant architecture, while TCS-500, also with functional safety, has 1oo2D redundancy, with up to 64 modules per station and 1500 input/output points. The PLC series includes G5Pro, G5Pro Safety and G3Smart, with redundancy of power supply, processor, I/O and communication on G5Pro.

UCS is a software-defined control platform, with TCS-900 and T9100 controllers, an optical network and an APL interface in the field. The choice of system depends on the scale of the plant, the protocols of the existing instruments and the required safety level, which is why the quotation starts from the signal list, the intended architecture and any SIL requirements.

What do we supply from the SUPCON range?

ProductDescription
ECS-700 and JX-300XP DCSECS-700 is the system for large plants, with operator and engineering stations, historian, OPC and asset management. JX-300XP is for small and medium plants, with intelligent management of field instruments: remote configuration, calibration and diagnostics.
Webfield TCS-900 and TCS-500 SISSafety instrumented systems with functional safety. TCS-900 has dual controllers in a triple modular redundant architecture, while TCS-500 uses 1oo2D redundancy, hot-swappable modules and event recording with 1 ms resolution.
G5Pro, G5Pro Safety and G3Smart PLCsG5Pro has redundancy of power supply, processor, I/O and communication, 100 Mbps transmission and RSA and AES encryption. G5Pro Safety has versions with functional safety and targets emergency shutdown (ESD) systems, while G3Smart accepts universal I/O modules.
UCS universal control systemA software-defined control platform, with TCS-900 and T9100 controllers, a 25G TSN optical network, the NyxOS operating system and an APL interface in the field, for continuous and discrete processes in the same architecture.

Why SUPCON?

  • Control and safety from the same family — DCS (ECS-700, JX-300XP), SIS (TCS-900, TCS-500) and PLC (G5Pro, G3Smart) for process plants
  • SIS with functional safety according to the manufacturer's documentation — TCS-900 with a triple modular redundant architecture, and TCS-500 with approvals
  • Open field protocols — HART, FF, Modbus, PROFIBUS, OPC UA, PROFINET and EtherNet/IP in the DCS systems
  • PLC with full redundancy — G5Pro redundant in power supply, processor, I/O and communication, from −20 to +70 °C
  • Software-defined UCS platform — TCS-900 and T9100 controllers, an optical network and APL for field instruments

Which SUPCON codes and series are requested most often?

CodeDescription
ECS-700DCS system for large and complex plants
JX-300XPDCS system for small and medium plants
Webfield TCS-900SIS with functional safety, triple modular redundant architecture
Webfield TCS-500Compact SIS with functional safety, 1oo2D redundancy, up to 64 modules
G5ProPLC with redundancy of power supply, processor, I/O and communication
G5Pro SafetySafety PLC, version with functional safety
G3SmartPLC for a distributed system, universal I/O modules
UCSSoftware-defined universal control system
T9100Controller for medium-scale processes, in the UCS platform

Where is SUPCON equipment used?

  • Chemicals and petrochemicals — distributed control and safety for process plants
  • Oil and gas — ESD emergency shutdown systems with functional safety
  • Large process plants — ECS-700 with operator and engineering stations and a data historian
  • Small and medium process plants — JX-300XP with instrument management
  • Control system upgrades — replacing or extending existing systems

How do we supply SUPCON in Romania?

We can quote SUPCON control and safety components from the ECS-700, Webfield TCS-900 and TCS-500 families and the G5Pro and G3Smart PLCs, supplied to order. The lead time is usually 1–4 weeks to order; depending on the specification, for fully configured systems the lead time can be longer. For a correct quotation, send us the signal list (inputs, outputs, types), the required SIL level, the instrument protocols, the redundancy requirements and, for an existing system, the module code from the label.

A complete system is configured from the signal list and the intended architecture, and for safety equipment the SIL certificate is confirmed on the exact configuration.

Frequently asked questions about SUPCON

What does SUPCON make?

SUPCON makes automation systems for the process industry: distributed control systems (ECS-700, JX-300XP), safety instrumented systems (Webfield TCS-900 and TCS-500), programmable logic controllers (G5Pro, G3Smart), the UCS platform, control valves and instruments. The headquarters is in Hangzhou, China.

How do I choose between TCS-900 and TCS-500?

TCS-900 is the basic safety system, with dual controllers in a triple modular redundant architecture. TCS-500 is compact, with 1oo2D redundancy, up to 64 modules per station and 1500 input/output points. Send us the number of signals, the SIL level and the required availability and we recommend the system.

Do you supply SUPCON equipment in Romania, and within what time?

We supply to order; the usual lead time is 1–4 weeks, and fully configured systems may need longer, depending on the specification. You receive the lead time per code in the quotation.

Can an existing JX-300XP system be extended?

Extension depends on the generation of the installed system, the existing I/O modules and the protocols used. Compatibility is confirmed after a comparison; send the module codes from the labels, the control network diagram and the number of added points.

What do I send for a quotation on a G5Pro PLC?

Send the number and type of signals (analogue, digital), the communication protocols required, the redundancy level wanted, the temperature range in the cabinet and whether you need a SIL 3 safety version. If you are replacing a module, add the code from the label.

How do I request a SUPCON quotation?

Send the SUPCON code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SUPCON (manufacturer documentation)