Who is TDK-Lambda and what does it make?
TDK-Lambda is a power supply brand, with a wide range of AC/DC power supplies for DIN rail mounting, used in industrial automation and control equipment. The range includes low-power single-output power supplies for compact panels, high-power three-phase power supplies for industrial installations and DC/DC converters for voltage distribution inside an electrical panel. We can quote from the DIN rail power supply series published by the manufacturer for electrical panel integrators.
What sets the TDK-Lambda range apart is its clear segmentation by application niche: the DRB series covers power from 15 to 480 W for general use, D1SE covers 120–480 W, DRL is designed specifically for low-profile mounting in narrow panels, and DRF/HL comes certified for explosion-risk zones. For voltage distribution downstream in the power chain, the DC-DC converters in the DDSM series cover 120-240 W without needing a separate AC/DC power supply for each voltage level.
For electrical panels and automation cabinets in Romania, TDK-Lambda power supplies are a solution when the project calls for proven reliability and availability in special variants (extreme temperatures, Ex zones).
What do we supply from the TDK-Lambda range?
| Product | Description |
|---|---|
| DRB Series | Single-output power supplies for DIN rail mounting, covering power from 15 to 480 W, with a three-phase DRB variant of 120-960 W for higher-power installations. Typical application: powering PLCs, sensors and relays in industrial automation panels. The customer must specify the power required, the output voltage desired (usually 24V DC) and whether the mains supply is single-phase or three-phase. |
| DRL Series | Low-profile power supplies for DIN rail mounting in panels where space is limited, with power from 10 to 100 W. Typical application: compact electrical cabinets, small-size control equipment. The customer must confirm the space available in the panel and the power consumption of the load for correct selection. |
| DRF / DRF-HL Series | High-efficiency power supplies, with power from 120 to 960 W, the HL variant being certified for mounting in explosion-risk zones. Typical application: installations in the petrochemical industry or other Ex-classified environments. The customer must state the zone classification (if applicable) and the power required in order to receive the correct variant. |
| DDSM DC-DC Converter | DC-DC converter for DIN rail mounting, with power of 120 or 240 W, used to obtain a secondary voltage from an existing DC bus in the panel, without a separate AC/DC power supply. Typical application: distributing 12V or 5V from a 24V bus already present in the panel. The customer must specify the input voltage available and the output voltage required. |
Why TDK-Lambda?
- A range segmented by niche — from compact 15 W power supplies to three-phase modules of almost 1 kW on DIN rail
- Variants for explosion-risk zones (DRF/HL), useful in petrochemicals and process industries
- Dedicated DC-DC converters (DDSM, DPX) for internal voltage distribution without an additional AC/DC power supply
- Redundancy modules (DRM40) and buffer modules (DBM20) for continuity of supply during a mains failure
Which TDK-Lambda codes and series are requested most often?
| Code | Description |
|---|---|
| DRB | DIN rail power supply, single output, up to 480 W |
| DRB 3 Phase | Three-phase variant of the DRB series for higher power on DIN rail |
| DRL | DIN rail power supply, low profile, up to 100 W |
| DRF | High-efficiency DIN rail power supply, up to 960 W |
| DRF-HL | Variant of the DRF series certified for explosion-risk zones |
| HWS | General-purpose industrial power supply, up to 1560 W |
| RWS-B | General-purpose and medical power supply |
| CUS | Family of power supplies for medical and industrial equipment |
| GUS | Industrial power supply |
| Vega | Modular industrial power supply |
| DDSM | Isolated DC-DC converter on DIN rail, between 120 and 240 W |
| i7A | Non-isolated buck DC-DC converter, between 400 and 1000 W |
| i9C | Non-isolated DC-DC converter |
| EDC | Programmable DC-DC converter |
| GENESYS+ | Programmable laboratory power supply, from 1 to 22.5 kW |
| Z+ | Programmable bench or rack power supply, between 200 and 800 W |
Where is TDK-Lambda equipment used?
- Industrial automation — powering PLCs and control equipment in panels
- Renewable energy — power supplies for monitoring equipment in solar and wind parks
- Rail transport and automotive — power supplies with specific certifications for vibration environments
- Medical and scientific — power supplies for laboratory and diagnostic equipment
- Industrial LED lighting — power for lighting control systems
How do we supply TDK-Lambda in Romania?
We check availability on every request, working from the datasheets of the Japanese manufacturer to establish the series suited to each project. We bring in TDK-Lambda power supplies to order, usually within 1–4 weeks of confirmation. For a correct quotation we need the power required, the output voltage, the mounting type (standard DIN rail or low profile) and, where applicable, the certification requirement for explosion-risk zones. Availability of the special variants and of the high-power three-phase models is confirmed on each request.
We check the Ex-certified variants (DRF/HL) on request; compatibility with the monitoring firmware of other electrical panel brands is established case by case.
Frequently asked questions about TDK-Lambda
What is the difference between the TDK-Lambda DRB and DRF power supplies?
DRB is a basic range of DIN rail power supplies, with single output and power of up to 480 W, suited to ordinary industrial automation. DRF adds higher efficiency and covers higher power, up to 960 W, and there is also the DRF-HL variant certified for zones with potentially explosive atmospheres. The choice depends on the power required in the panel and on whether there is a certification requirement for a hazardous environment.
Do you supply TDK-Lambda power supplies in Romania?
Yes, we bring in to order power supplies from the DRB, DRF, HWS or GENESYS+ ranges, as well as DC-DC converters such as DDSM or i7A, on the basis of the complete catalogue code. TDK-Lambda power supplies are ordered on demand, with no stock of our own held permanently; the publicly stated lead time usually varies between two and four weeks. We recommend confirming the input and output voltage before requesting a quotation.
How do I choose the right DC-DC converter from a TDK-Lambda range?
We start from the input voltage available in the system, the output voltage required and the maximum power demanded by the load, since each family covers different power ranges. It also matters whether galvanic isolation between input and output is needed, a criterion that separates isolated series such as DDSM from non-isolated ones such as i7A or i9C. The mounting, on DIN rail or on a board, also influences the choice of the right range.
What does the TDK-Lambda GENESYS+ series mean?
GENESYS+ is the family of high-power programmable power supplies, used in laboratories and in equipment testing, with power published by the manufacturer of between about 1 and 22.5 kW. It allows the output voltage and current to be adjusted from a local panel or through remote communication interfaces. It is a choice used where a fixed power supply does not cover the load variation needed in tests.
How do I request a TDK-Lambda quotation?
Send the TDK-Lambda code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: TDK-Lambda (manufacturer documentation)

