Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

VAHLE supplier in Romania

For VAHLE we offer U15, U25 and U35 insulated conductor bars, open conductor bar systems, current collectors, SMGM and SMGX slotted microwave waveguide and APOS positioning systems; the rated current and the length of the run are needed.

Founded in 1912 · Headquarters: Kamen, Germany

Request a quote

Who is VAHLE and what does it make?

VAHLE, headquartered in Kamen, Germany, and active since 1912, makes power supply, data transmission and positioning systems for mobile consumers: overhead cranes, stacker cranes, electric monorails, port equipment, lifts and facade access systems. The programme is organised in families: vPOWER for power, vCOM for data, vPOS for positioning, vDRIVE for control and vSYSTEM for complete solutions.

For power, the U15, U25 and U35 insulated conductor bars cover three current steps: 10–100 A, 200–450 A and 500–1250 A, at a rated voltage of 1000 V AC, with IP 23 touch protection, for indoor and outdoor installation. U15 allows travel speeds of up to 450 m/min, and U25 and U35 up to 600 m/min; the standard bar lengths are 6 m and 6.25 m respectively. The open conductor bar system runs from 220 to 2,360 A, with conductor cross-sections between 36 and 1,200 mm² and working temperatures between −40 and +200 °C, for heavy and process overhead cranes. The KDS, KUFR, KESR and KESL series current collectors take the current from the bar, and the Smart Collector monitors the condition of the system in operation, through 3D sensors integrated in the pantograph arms.

For data, the slotted microwave waveguide in the SMGM (Mini) and SMGX (Xtreme) versions is for environments with interference, vibration and dirt, where classic radio does not run stably. For positioning there are the magnetic and optical APOS versions, and for control the VCS1, VCSX and VCS-SMG-SAFE controllers. For a quotation, what matters is the bar type, the rated current, the length of the run, the type of collector and the environmental conditions.

What do we supply from the VAHLE range?

ProductDescription
U15, U25 and U35 insulated conductor barsSystems with IP 23 protection for 10–100 A (U15), 200–450 A (U25) and 500–1250 A (U35), at 1000 V AC. They are installed suspended, on the side or vertically, over lengths without expansion of 100, 150 and 250 m respectively. The U25 and U35 versions are also available for high temperatures.
Open conductor bar systemOpen bars for 220–2,360 A, with conductor cross-sections of 36–1,200 mm², a distance between phases of 150 mm and a speed of up to 250 m/min. The working temperature is between −40 and +200 °C. They are used on heavy and process overhead cranes, indoors and outdoors, including on medium-voltage installations.
Current collectors and Smart CollectorCurrent collectors from the KDS, KUFR, KESR and KESL series. The Smart Collector, compatible with these collectors, adds 3D sensors, on-board analysis and diagnostic transmission, at 24 V, for stacker cranes and electric monorails, in indoor spaces.
Data, positioning and control: SMGM, SMGX, APOS, VCSSMGM and SMGX slotted microwave waveguide for data, magnetic and optical APOS positioning systems and VCS1 and VCSX controllers, plus VCS-SMG-SAFE for safety control of drives. They are chosen according to the working environment, the mounting space and the performance level required by the installation.

Why VAHLE?

  • Three steps of insulated bars, U15, U25 and U35, from 10 to 1250 A: the step is chosen according to the current of the mobile consumer, without oversizing
  • Open conductor bar system from 220 to 2,360 A, up to +200 °C: for heavy and process overhead cranes, including in hot environments
  • Power, data and positioning in the same programme: the bar, the collector, the microwave waveguide and the position sensor fit each other
  • Smart Collector with 3D sensors in the pantograph: tracks wear of the system in operation and helps maintenance planning
  • SMGM and SMGX slotted microwave waveguide: stable data transmission in environments with vibration, interference and dirt

Which VAHLE codes and series are requested most often?

CodeDescription
U15Insulated conductor bar, 10–100 A, 1000 V AC, IP 23
U25Insulated conductor bar, 200–450 A, 1000 V AC
U35Insulated conductor bar, 500–1250 A, 1000 V AC
Open conductor bar system220–2,360 A, conductor cross-sections of 36–1,200 mm²
KDS 2/40Type of current collector compatible with Smart Collector
KUFR 2/40Type of current collector compatible with Smart Collector
KESR / KESLTypes of current collectors compatible with Smart Collector
Smart CollectorCollector with 3D sensors, 24 V, IP54, up to 300 m/min
SMGMSlotted microwave waveguide, Mini version
SMGXSlotted microwave waveguide, Xtreme version
APOS MagneticMagnetic positioning system
APOS OpticOptical positioning system
VCS1 / VCSXControllers for drives, single-axis and modular
VCS-SMG-SAFESafety controller for drives

Where is VAHLE equipment used?

  • Overhead cranes and gantry cranes: power supply to mobile machinery with conductor bars and collectors
  • Intralogistics: stacker cranes, electric monorails, automated guided vehicles and sorting lines
  • Ports: eRTG, STS and RMG cranes, power supply and charging
  • Automotive industry: pallet conveyors and overhead conveyor systems
  • Special installations: lifts, trams, car parks, stadium roofs, facade access

How do we supply VAHLE in Romania?

We can quote U15, U25 and U35 insulated conductor bars, open systems, current collectors, Smart Collector components, SMGM and SMGX slotted microwave waveguide and parts for existing VAHLE systems. For a correct quotation, send the rated current and the number of poles, the length of the run and the type of installation, the travel speed, the environmental conditions and the type of collector, for example KDS or KESR, or the code on the existing part. For parts, a photo of the nameplate also helps. The systems are supplied to order, usually in 1–4 weeks, and depending on length and configuration the lead time can be longer. You receive the exact confirmation in the quotation.

For upgrades of older VAHLE installations, we check in the quotation whether the new collectors and bars match the existing system, based on the codes on the parts.

Frequently asked questions about VAHLE

What systems does VAHLE include, from the vPOWER bars and collectors to the vCOM microwave waveguide, vPOS and vDRIVE?

VAHLE makes systems for industrial mobile consumers: conductor bars and collectors for power (vPOWER), microwave waveguide for data (vCOM), magnetic and optical positioning systems (vPOS) and controllers (vDRIVE), used on overhead cranes, stacker cranes, ports and lifts.

How do I choose between the U15, U25 and U35 bars?

The choice starts from the current of the consumer: U15 for 10–100 A, U25 for 200–450 A, U35 for 500–1250 A. Speed (450 or 600 m/min), the length of the run and the temperature also matter. Send us the data of the consumer and of the run, and we check the suitable step.

Can I replace the worn current collectors of a VAHLE installation?

Yes, after identification. We need the type of collector, for example KDS, KESR or KESL, the number of poles, the rated current and the type of bar it runs on. With the code on the part we check the suitable item and include it in the quotation.

What are the technical data of the VAHLE Smart Collector with sensors?

Smart Collector is a current collector whose 3D sensors record arm stroke and deflection during operation. Data: 24 V, max. 5 A, data transfer up to 100 MBit, IP54, max. speed 300 m/min, indoor use only, −30 °C … +55 °C. It is used with U10 and VKS10 conductor systems. We confirm the exact variant with the quotation.

What data is needed for a run with U15, U25 or U35 conductor bars?

The rated current and the number of poles, the total length of the run, the maximum travel speed, the type of installation (suspended, on the side or vertical), the temperature and the working environment. If an installation already exists, also send the codes of the existing parts, for compatibility.

How do I request a VAHLE quotation?

Send the VAHLE code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Paul Vahle GmbH & Co. KG (manufacturer documentation)