Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Temposonics supplier in Romania

For Temposonics we offer magnetostrictive linear position sensors from the R, G, E and MH series, plus LP series level transmitters; for a quotation we need the complete code from the nameplate, the stroke length and the interface.

Headquarters: Lüdenscheid, Germany

Request a quote

Who is Temposonics and what does it make?

Temposonics makes linear position sensors based on a single principle, the magnetostrictive one, and level transmitters for tanks. The European headquarters is in Lüdenscheid, Germany, and the American headquarters is in Cary, North Carolina. The sensor measures the position of a movable magnet on a rod or on a profile and transmits it through an industrial interface.

The industrial series are R-Series V, G-Series V, E-Series, GB, T and L, grouped by field of application. R-Series V measures strokes of 25 to 20,000 mm and offers PROFINET, EtherCAT, EtherNet/IP, POWERLINK, SSI or analogue outputs. G-Series V covers 25 to 7,620 mm with analogue or digital output, and E-Series 50 to 3,000 mm, with analogue, CANopen, IO-Link, Start/Stop or SSI outputs.

For mobile hydraulics there is the MH-Series, with strokes of 50 to 10,500 mm and analogue, CAN, CANopen Safety or PWM outputs, with an operating temperature from -40 to +105 °C. The LP-Series level transmitters measure the product level, the interface between liquids and the temperature, with an intrinsic accuracy of ±1 mm.

When replacing an existing sensor, the starting point is the code on the nameplate: it contains the series, the design, the stroke length and the interface, so it is used to check the version.

What do we supply from the Temposonics range?

ProductDescription
R-Series V and G-Series VPosition sensors for industrial machinery. R-Series V: strokes of 25 to 20,000 mm, PROFINET, EtherCAT, EtherNet/IP, POWERLINK, SSI or analogue outputs. G-Series V: strokes of 25 to 7,620 mm, analogue or digital output, with diagnostics through TempoLink.
E-SeriesIndustrial position sensors, with strokes of 50 to 3,000 mm. The outputs are analogue, CANopen, IO-Link, Start/Stop or SSI. There are seven designs, from rod to profile, each with its own code.
MH-SeriesSensors for piston position in the hydraulic cylinders of mobile machinery. Strokes of 50 to 10,500 mm, analogue, CAN, CANopen Safety or PWM outputs. The versions include EMBEDDED, THREADED, FLEX, SAFETY, REDUNDANT and RAIL.
LP-Series and LL-SeriesLevel transmitters for tanks and process vessels. LP-Series measures level, interface, temperature and volume, with ±1 mm accuracy and Modbus, DDA, analogue or HART outputs, in intrinsically safe and explosion-proof versions.

Why Temposonics?

  • A single measuring principle, the magnetostrictive one: the same type of sensor for position and for level
  • Strokes from 25 to 20,000 mm on R-Series V: a single series covers everything from short cylinders to long lines
  • Varied industrial interfaces, from analogue to PROFINET and EtherCAT: the sensor connects to the existing controller
  • MH series for mobile hydraulics, from -40 to +105 °C: fitted in the cylinders of mobile machinery
  • LP transmitters for tanks, with ±1 mm accuracy: level, interface and temperature from the same device

Which Temposonics codes and series are requested most often?

CodeDescription
R-Series VPosition sensor with network outputs, strokes 25–20,000 mm
G-Series VPosition sensor, strokes 25–7,620 mm
E-SeriesPosition sensor, strokes 50–3,000 mm
GB-SeriesIndustrial position sensor
T-SeriesIndustrial position sensor
L-SeriesIndustrial position sensor
MH-SeriesSensor for mobile hydraulic cylinders, strokes 50–10,500 mm
LP-SeriesLevel transmitter for tanks, ±1 mm
LL-SeriesLevel transmitter for liquids
RH5Rod version of R-Series V

Where is Temposonics equipment used?

  • Industrial hydraulics: piston position in the hydraulic cylinders of machines
  • Mobile hydraulics: cylinders of cranes, excavators and agricultural machinery
  • Automation: position feedback on lines and special machines
  • Tanks and storage: level and interface in process vessels
  • Rail transport: MH sensors in the RAIL version

How do we supply Temposonics in Romania?

We can quote Temposonics linear position sensors and LP series level transmitters. For a correct quotation, send the complete code from the sensor nameplate, because it contains the series, the design, the stroke length and the interface. If there is no code, we need the series, the measured stroke, the output type (analogue, CANopen, SSI, EtherCAT) and the supply voltage. We supply to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the specification, the lead time can be longer and is confirmed in the quotation.

Sensors are configured to the stroke length and the interface required, so we quote from the complete code or from the data measured on the existing sensor.

Frequently asked questions about Temposonics

What Temposonics sensor series exist for linear position and level: R, G, E, GB, T, L, MH, LP and LL?

Magnetostrictive linear position sensors for industrial applications and mobile hydraulics (R, G, E, GB, T, L, MH) and level transmitters for tanks (LP, LL). The European headquarters is in Lüdenscheid, Germany, and the American one in Cary, North Carolina.

How do I choose the stroke length of the sensor?

The measured stroke has to cover the full travel of the piston or mechanism, plus a margin at the ends. The series start at 25 mm and reach 20,000 mm on R-Series V. Send the cylinder stroke and the mounting form, and we check the series.

How do I replace an old Temposonics sensor with one from the current series?

It is checked against the code on the nameplate: the series, the length, the interface and the mounting must be compatible. Send the code of the existing sensor, the voltage and the output type, and we confirm the successor or the suitable version in the quotation, before the order.

Do you supply Temposonics in Romania and how soon?

Yes. We supply to order, usually in 1–4 weeks, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. Sensors with a special stroke can take longer; we confirm the exact lead time in the quotation, after we receive the code.

How do I request a quotation for a position sensor from the R or G series?

The code from the nameplate, or the series, the stroke in millimetres, the interface (analogue, CANopen, SSI, PROFINET), the supply voltage and the mounting form, with rod or with profile. For level transmitters, add the height of the tank and the liquid measured.

How do I request a Temposonics quotation?

Send the Temposonics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Temposonics (manufacturer documentation)