Transmission Dynamics supplier in Romania
For Transmission Dynamics we quote KillerBug, MiniTemp, SmartBug, SquareBug and high-speed telemetry; we need the quantity to be measured, the speed, the shaft diameter, the range and the transmitter–receiver distance.
Founded in 1996 · Headquarters: Cramlington, United Kingdom
Who is Transmission Dynamics and what does it make?
Transmission Dynamics is a British company from Cramlington, active since 1996, which designs and manufactures wireless telemetry systems for rotating and hard-to-reach machinery. The problem it solves is the direct measurement, in operation, of quantities that cannot be read with cables: the torque on the input shaft of a gearbox, the temperature of a rotating bearing or the strain of a moving part. With this data, a maintenance engineer can correlate bearing and gear failures with real events in the installation.
KillerBug is the torque telemetry system, which measures torque and bending on the input shaft of industrial drives and captures transient events, for example torque reversals that load bearings in their unloaded zone. MiniTemp is a miniature temperature transmitter, in a 42×27×11 mm variant, to which a PRT (platinum resistance thermometer) probe or a thermocouple is soldered, intended for bearings, gearboxes and shafts, with a battery of over two years. SmartBug is a compact wireless temperature, vibration and motion sensor, with a ±16 g or ±200 g triaxial accelerometer and a triaxial gyroscope, in a cylindrical housing of about 28 mm diameter. SquareBug has 12 measurement channels, four of them for strain gauges, configurable in quarter, half or full bridge, and transmits the data to the GDN web platform. High-speed telemetry takes strain gauge bridge and pressure signals, with a typical range of up to 30 m.
Applications are wind energy, mining, railways, test benches and industrial drives. The offer starts from the system required and the quantity to be measured, not from a standard code.
What do we supply from the Transmission Dynamics range?
| Product | Description |
|---|---|
| KillerBug — torque telemetry | System that measures input torque and shaft bending on industrial drives. It captures transients, such as the torque reversals in wind turbines, which suddenly load bearings in the unloaded zone and can lead to their failure. |
| MiniTemp — temperature transmitter | Miniature telemetry transmitter, 42×27×11 mm in the MiniTemp-CC variant, to which a PRT probe or a thermocouple is soldered. It is made for bearings, gearboxes and shafts, has a battery of over two years and a separately powered receiver. |
| SmartBug and SquareBug | SmartBug measures temperature, vibration and motion, with a triaxial accelerometer and gyroscope. SquareBug has 12 channels, four of them for strain gauges, and counts cycles using the Rainflow method. Both communicate by radio up to 50 m, and SmartBug has railway approval. |
| High-speed telemetry and Smart Oil Plug | Wireless telemetry systems for loads in operation on rotating machinery, with 3 V bridge excitation, 0–5 V or 4–20 mA analogue outputs and a typical range of 30 m. Smart Oil Plug is an intelligent oil plug for wireless monitoring of gearboxes. |
Why Transmission Dynamics?
- Torque directly on the shaft — KillerBug captures transients and torque reversals that damage bearings and gearboxes
- Temperature on rotating parts — MiniTemp, with a PRT probe or thermocouple soldered to the transmitter, is made for bearings, gearboxes and shafts
- Compact sensor for motion and temperature — SmartBug measures vibration, rotation and temperature without cables, up to 50 m from the receiver
- Wireless strain gauge measurement — SquareBug has 12 channels, four of them for strain, with the GDN web platform for data
- Custom instrumentation — some systems are configured for the customer's quantities and machines, not only from a catalogue
Which Transmission Dynamics codes and series are requested most often?
| Code | Description |
|---|---|
| KillerBug | Digital torque and bending telemetry |
| MiniTemp | Miniature temperature transmitter for rotating parts |
| MiniTemp-CC | 42×27×11 mm variant |
| SmartBug | Wireless temperature, vibration and motion sensor |
| SquareBug | Wireless system with 12 channels, four for strain gauges |
| High Speed Telemetry | High-speed wireless telemetry for strain gauge bridges |
| Smart Oil Plug | Oil plug for wireless monitoring of gearboxes |
| LMF+ | Bolt tension monitoring |
| SonicEcho | Wireless ultrasonic inspection |
| SmartStep | Escalator condition monitoring |
| PANDAS | Monitoring of pantographs and the third rail on railways |
| GDN | Global Data Network, web data platform |
Where is Transmission Dynamics equipment used?
- Wind energy — torque on the input shaft and bearing temperature
- Mining — loading of high-power drives and gearboxes
- Railways — monitoring of pantographs, the third rail and bearings
- Test benches — torque, temperature and strain gauge measurements on prototypes
- General industry — monitoring of gearboxes, shafts and bearings
How do we supply Transmission Dynamics in Romania?
We can quote Transmission Dynamics systems, for example KillerBug, MiniTemp, SmartBug, SquareBug and high-speed telemetry, based on the machine specification. They are supplied to order, usually 1–4 weeks; depending on the specification, the lead time can be longer for systems configured on request. For an accurate quotation, send us the quantity to be measured (torque, temperature, strain, vibration), the speed and shaft diameter, the expected range, the distance between transmitter and receiver, the power supply and the output required. For an existing system, add the name and serial number.
A telemetry system on a rotating shaft is defined on the basis of the speed, the diameter and the space available for mounting.
Frequently asked questions about Transmission Dynamics
What does Transmission Dynamics make?
Transmission Dynamics makes wireless telemetry systems and sensors for rotating machinery: KillerBug for torque, MiniTemp for temperature, SmartBug and SquareBug for vibration and strain gauge measurement, plus high-speed telemetry. The company has worked since 1996 in Cramlington, in the United Kingdom.
How do I choose between KillerBug, MiniTemp and SquareBug?
KillerBug measures torque on the input shaft, MiniTemp the temperature of a rotating part, and SquareBug strain gauge measurement and acceleration on 12 channels. The choice depends on the quantity to be monitored and the mounting space; send us the machine, the speed and the shaft diameter.
Can Transmission Dynamics systems be supplied in Romania and how fast?
Systems are supplied to order, usually in 1–4 weeks. A transmitter can ship in 24–72 h when the item is in stock, locally or at the supplier. Systems configured on request can take longer, depending on the specification.
Can an older transmitter or receiver be replaced with a current variant?
It is checked on the basis of the name, the serial number and the operating frequency. Interchangeability is checked on the data, not by the name; send us the data from the transmitter, the type of probe connected and the result required, and we show what can be reused on the new system.
What information do I need to send you for a wireless telemetry quotation?
Send the quantity to be measured (torque, temperature, strain, vibration), the speed and shaft diameter, the expected range, the transmitter–receiver distance, the power supply available, the output required (0–5 V, 4–20 mA, data over the web) and the environmental conditions at the mounting location.
How do I request a Transmission Dynamics quotation?
Send the Transmission Dynamics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Transmission Dynamics (manufacturer documentation)

