Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Van Essen Instruments supplier in Romania

For Van Essen Instruments we quote Diver TD, Cera, CTD, Micro and Baro loggers, Diver-Link telemetry units, DXT cables and Diver-Mate, based on the immersion depth, the water quality and the well diameter.

Founded in 1938

Request a quote

Who is Van Essen Instruments and what does it make?

Van Essen Instruments is a Dutch company founded in 1938 in Delft, with a single field from the start: water measurement instrumentation. The main family is Diver, a line of submersible groundwater level loggers launched in 1995, of which more than 250,000 units have been sold. The company also makes communication cables, telemetry units, accessories and software for reading and managing data. The products are designed for long-term installation in boreholes and wells, where the logger stays under water for months or years.

The principle is simple: a pressure sensor submerged at a fixed depth measures the hydrostatic pressure of the water column and, from it, the logger calculates the total depth. The TD-Diver is the basic model, with enough memory for one sample every 15 minutes for 2 years; the Micro-Diver, 18 mm in diameter, fits narrow wells; the Cera-Diver has a ceramic housing for brackish and sea water, and the CTD-Diver also measures conductivity. The Baro-Diver records atmospheric pressure, needed for compensation.

For Romania, the series is of interest to hydrogeologists, water abstraction operators, mining, waste landfills, contaminated sites and remediation projects, where the groundwater level is monitored over long periods. The choice depends on the immersion depth, the water quality, the well diameter and the way of reading, locally or by telemetry, which is why the quotation starts from the exact model and the pressure range required.

What do we supply from the Van Essen Instruments range?

ProductDescription
TD-Diver and Baro-DiverThe TD-Diver is a submersible pressure and temperature logger for water level, with a rugged housing and memory for one sample every 15 minutes for two years; the Baro-Diver measures atmospheric pressure, with one sample per hour for eight years.
Cera-Diver and CTD-DiverLoggers with a corrosion-resistant ceramic housing, for brackish and sea water; the Cera-Diver has a typical accuracy of ±0.05% of full scale, and the CTD-Diver also measures conductivity, in ranges of 10, 50, 100 and 200 m.
Micro-DiverA very small logger, 88 mm long and 18 mm in diameter, for monitoring wells and boreholes too narrow for the larger models, with memory for 48,000 records and ranges of 10, 20, 50 and 100 m.
Diver-Link, DXT cable and Diver-MateThe Diver-Link is the 4G/LTE telemetry unit for remote monitoring, the DXT cable (from 1 to 300 m) connects the Diver to the surface, and the Diver-Mate collects the data in the field and transfers it through the Diver-App or by USB.

Why Van Essen Instruments?

  • Specialisation in water instruments since 1938 — the same direction of development for more than eight decades, with the Diver line since 1995
  • Family of loggers by operating conditions — TD-Diver for general use, Cera-Diver for brackish water, CTD-Diver for conductivity, Micro-Diver for narrow wells
  • Large memory and backup — the TD-Diver stores one sample every 15 minutes for 2 years, and the CTD-Diver reaches 144,000 measurements
  • 4G/LTE telemetry through Diver-Link — transmits data from one Diver or from up to three Divers (Triple version), with firmware updates over the network
  • Simplified field reading — the DXT cable and Diver-Mate allow downloading without taking the logger out of the well

Which Van Essen Instruments codes and series are requested most often?

CodeDescription
TD-DiverSubmersible water level, pressure and temperature logger
Cera-DiverLogger with ceramic housing, 10, 20, 50 and 100 m
CTD-DiverLogger with conductivity, 10, 50, 100 and 200 m
Micro-DiverCompact logger, 18 mm diameter, 10, 20, 50 and 100 m
Baro-DiverAtmospheric pressure logger
Diver-Link4G/LTE telemetry unit for one Diver
Diver-Link TripleTelemetry unit for up to three Divers
DXT-CableCommunication cable for Diver, 1–300 m
Diver-MateField data download device
Diver-OfficeSoftware for programming and reading Divers
Diver-HUBWeb portal for managing field data
Diver-AppAndroid app for data transfer

Where is Van Essen Instruments equipment used?

  • Hydrogeology — long-term groundwater level monitoring
  • Remediation of contaminated sites — detection of pollutant migration and infiltration
  • Mining — water level in wells and mine workings
  • Coastal areas — monitoring of saltwater intrusion
  • Surface water management — stormwater runoff, stream flows, level in shallow water

How do we supply Van Essen Instruments in Romania?

We can quote Diver loggers (TD, Cera, CTD, Micro, Baro), Diver-Link telemetry units, DXT cables and field accessories, which are supplied to order. The lead time is usually 1–4 weeks; for configurations with telemetry or special cable lengths, the lead time may be longer. For an accurate quotation, send us the existing model or the type of water (fresh, brackish, sea), the maximum immersion depth, the well diameter, the measuring interval required and whether you need remote reading.

The pressure range or the housing type is determined from the immersion depth and the water quality, and compatibility with older software is checked separately.

Frequently asked questions about Van Essen Instruments

What does Van Essen Instruments make?

Van Essen Instruments makes Diver submersible loggers for groundwater level, pressure, temperature and conductivity, plus Diver-Link telemetry units, communication cables, field accessories and reading software. The company was founded in 1938 in Delft and has sold more than 250,000 Divers since 1995.

How do I choose between the TD-Diver, Cera-Diver, CTD-Diver and Micro-Diver?

The TD-Diver suits general use in fresh water, the Cera-Diver corrosive environments such as brackish or sea water, the CTD-Diver cases where conductivity must also be measured, and the Micro-Diver narrow wells. Send us the maximum depth, the water quality and the well diameter.

Do you supply Diver loggers in Romania, and how quickly?

Diver loggers and their accessories are supplied to order, usually in 1–4 weeks. For configurations with telemetry or special cable lengths the lead time may increase; we give the exact value in the quotation, after checking the model and the pressure range.

Can I replace an old Diver with a current model?

This can be checked from the model, the pressure range and the serial number on the logger, the cable used and the reading software. A direct replacement is confirmed once these data have been compared, especially if you use an older reading program or a telemetry unit.

What data do I need to send for a quotation on a Diver system?

Send the type of water, the maximum immersion depth, the inside diameter of the well, the measuring interval required, the duration of monitoring and whether remote reading is needed. For replacements, add the model and serial number of the existing Diver and the length of the DXT cable.

How do I request a Van Essen Instruments quotation?

Send the Van Essen Instruments code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Van Essen Instruments (manufacturer documentation)