Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

UNIMEC supplier in Romania

For UNIMEC we quote TP and TPR trapezoidal screw jacks, K series ball screw jacks, X and Aleph series, bevel gearboxes and speed modulators, based on load, stroke, speed and the size on the nameplate.

Founded in 1981 · Headquarters: Usmate Velate, Italy

Request a quote

Who is UNIMEC and what does it make?

UNIMEC is an Italian manufacturer of mechanical screw jacks, bevel gearboxes and mechanical speed modulators, active since 1981 and based in Usmate Velate, near Milan. The factory covers 20,000 m², of which 10,000 m² is roofed, and production is concentrated in its own plant, from design to CNC machining.

A screw jack converts rotary motion into lifting, pulling, moving or aligning a load. The trapezoidal screw version, in the TP (translating screw) and TPR (rotating screw) models, is self-locking, so it holds the load without an additional brake, and several units are synchronised through shafts, couplings and bevel gearboxes. The K series has a ball screw, for fast positioning and intensive duty, the X series is made of AISI 316 stainless steel, and the Aleph series, in three sizes, uses an engineering polymer and runs without lubrication at low loads. The cubic bevel gearboxes come in nine standard sizes with ratios of up to 1/12, and the speed modulators, based on a planetary gear, allow the output speed to be corrected during operation. The range also includes disc couplings and transmission shafts.

For a maintenance engineer or a machine designer, these items appear in synchronised lifting platforms and in packaging, printing, and sheet metal and plastics processing lines. Size selection takes into account the tensile or compressive load, the stroke, the lifting speed, the duty cycle and the type of drive.

What do we supply from the UNIMEC range?

ProductDescription
TP and TPR trapezoidal screw jacksMechanical screw jacks with a translating (TP) or rotating (TPR) screw, with a worm gear in an oil bath and standard double guidance. They are self-locking and can be combined in synchronised groups. Versions in AISI 316 stainless steel (X series) and in engineering polymer (Aleph series) are available.
K series ball screw jacksBall screw jacks for fast positioning, high precision and intensive duty cycles. They are installed individually or in synchronised groups, linked by shafts, couplings and bevel gearboxes, for coordinated movements on large structures.
Bevel gearboxes, including the stainless X seriesCubic gearboxes that change the direction of rotation between perpendicular shafts, in nine standard sizes, dozens of mounting forms and ratios of up to 1/12. They are coupled to IEC, brushless or pneumatic motors; the X series 54, 86, 110 and 134 is made of AISI 316 stainless steel.
Mechanical speed modulatorsDevices with a planetary gear whose outer ring is adjusted with a worm screw, manually or by motor, to temporarily increase or decrease the output speed without stopping the machine. They are used for synchronising work stations and for adjusting tension in winding lines.

Why UNIMEC?

  • Self-locking trapezoidal screw — the TP and TPR models hold the load in position without an external brake, and several units are synchronised through shafts and bevel gearboxes
  • Ball screw in the K series — fast positioning, high precision and intensive duty, for groups of synchronised jacks on large structures
  • X series in AISI 316 stainless steel — jacks in sizes 204, 306 and 407 and bevel gearboxes in sizes 54, 86, 110 and 134, for wet, food and marine environments
  • Speed modulators with planetary gear — the output speed is corrected with a worm screw without stopping the machine, for synchronising work stations
  • Drive of your choice — DC or AC electric motors, hydraulic or pneumatic motors, or manual operation

Which UNIMEC codes and series are requested most often?

CodeDescription
TPTranslating trapezoidal screw jack
TPRRotating trapezoidal screw jack
Series KBall screw jacks, for intensive duty
Series AlephTrapezoidal screw jacks in engineering polymer, in three sizes
Series X 204AISI 316 stainless steel jack, size 204
Series X 306AISI 316 stainless steel jack, size 306
Series X 407AISI 316 stainless steel jack, size 407
Series X 54AISI 316 stainless steel bevel gearbox, size 54
Series X 86AISI 316 stainless steel bevel gearbox, size 86
Series X 110AISI 316 stainless steel bevel gearbox, size 110
Series X 134AISI 316 stainless steel bevel gearbox, size 134
Reductor unghiularNine standard sizes, ratios of up to 1/12
Speed modulatorPlanetary gear with ring corrected by a worm screw
Disc couplingMetal coupling with high torsional stiffness, backlash-free

Where is UNIMEC equipment used?

  • Packaging, paper and printing — speed modulators for synchronising work stations
  • Sheet metal and plastics processing — lines with several work stations and feed belts
  • Food industry and marine environment — AISI 316 stainless steel jacks and gearboxes, X series
  • Platforms and large structures — groups of jacks synchronised through shafts and bevel gearboxes
  • Winding lines — modulators used as continuous speed variators for constant tension

How do we supply UNIMEC in Romania?

For UNIMEC we can quote TP and TPR trapezoidal screw jacks, from the K, X and Aleph series, bevel gearboxes, speed modulators and disc couplings, supplied to order. The lead time is usually 1–4 weeks, and special configurations may need longer. For a correct quotation we need the load and its direction (tension or compression), the stroke, the lifting speed, the number of jacks in the group, the type of drive, the size on the nameplate and, for gearboxes, the ratio and mounting form.

The size of a screw jack follows from the load, stroke, speed and type of drive, and a special version is defined from the application data.

Frequently asked questions about UNIMEC

What does UNIMEC make?

At Usmate Velate, near Milan, UNIMEC makes mechanical screw jacks with a trapezoidal screw or a ball screw, in stainless steel or engineering polymer, bevel gearboxes, mechanical speed modulators, disc couplings and transmission shafts. The company has been operating since 1981 and makes its components in its own plant.

How do I choose between a trapezoidal screw jack and a ball screw jack?

The trapezoidal screw is self-locking and holds the load without an external brake. The ball screw of the K series is for fast positioning, high precision and intensive duty cycles. Send us the load, the stroke, the speed and the number of cycles per hour.

Do you supply UNIMEC screw jacks in Romania, and how fast?

We supply the jacks and gearboxes to order, and the lead time is usually between 1 and 4 weeks. For special versions, with a long stroke or outside the standard series, the lead time may be longer; we state it in the quotation.

Can I replace an old screw jack with a current series?

This can be checked from the size on the nameplate, the ratio, the stroke, the screw type (TP or TPR) and the mounting dimensions. We confirm a direct replacement after comparing these data; a photo of the nameplate and the mounting dimensions speed up identification.

What data do I send for a quotation on a mechanical speed modulator?

Send the input speed, the desired correction range on the output speed, the transmitted torque, the type of control (manual or motor) and the mounting position in the line. For a winder, also state the tension to be maintained.

How do I request a UNIMEC quotation?

Send the UNIMEC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: UNIMEC S.p.A. (manufacturer documentation)