Weforma supplier in Romania
Hydraulic shock absorbers, air springs, rotary dampers
Headquarters: Stolberg, Germany
Who is Weforma and what does it make?
Weforma Dämpfungstechnik is a German manufacturer based in Stolberg, near Aachen, specialising in two fields: deceleration technology (hydraulic shock absorbers, deceleration cylinders, rotary dampers, gas springs, pallet stops) and vibration isolation technology (air springs, PUR polyurethane buffers and metal cushions). The company has more than 40 years of experience and in-house production, with sales offices in Austria (Wiener Neustadt) and Italy (Noventa Padovana).
The range of industrial shock absorbers includes the Mega-Line series in two thread ranges (M8–M24×1.5 and M32×1.5–M115×2), with versions in stainless steel, for clean rooms, with air cushions, for lateral forces and for emergency situations. The heavy-duty shock absorbers are grouped in the LDS and HLS series, complemented by WES-G elasto-fluid springs and by lift buffers; they are used on cranes, automated high-bay warehouses, container logistics, end-of-travel buffer stops for trains, cable cars or movable bridges, and for decelerating slabs and supports in steelworks. WRD-H rotary dampers give a torque of up to 700 Nm, in three damping directions, and the stainless steel versions target outdoor use and the food and pharmaceutical industries.
Weforma air springs reach natural frequencies between 0.5 and 3.5 Hz, depending on type, with capacities from 0.5 kN to over 440 kN, diameters of 60–950 mm and strokes of up to 455 mm. Stainless steel metal cushions work between −90 °C and +400 °C. For a maintenance engineer, the interest arises in installations with moving masses (overhead cranes, conveyors, presses, packaging lines) and on machines where the end-of-stroke shock absorber has worn out.
What do we supply from the Weforma range?
| Product | Description |
|---|---|
| Mega-Line industrial shock absorbers | Hydraulic shock absorbers that decelerate moving masses, with versions for M8–M24×1.5 and M32×1.5–M115×2 threads, in stainless steel, clean-room, air-cushion or lateral-force designs. |
| Heavy-duty shock absorbers (LDS, HLS, WES-G) | The LDS and HLS series and WES-G elasto-fluid springs, intended for cranes, automated warehouses, container logistics, buffer stops for trains and cable cars, and for deceleration in steelworks. |
| Air springs | Pneumatic supports from 60 to 950 mm in diameter, with capacities from 0.5 kN to over 440 kN, strokes of up to 455 mm and a natural frequency below 3.5 Hz; versions are available with threaded studs, with a side valve, in stainless steel and for high temperature. |
| WRD-H rotary dampers | Series for the controlled damping of rotary movements of flaps, lids and hoods, with a torque of up to 700 Nm and clockwise, counter-clockwise or bidirectional options; from the WRD-H 2515 series they are adjustable. |
Why Weforma?
- Mega-Line in two thread ranges (M8–M24×1.5 and M32×1.5–M115×2) — adjustable shock absorbers for very different masses and speeds, from small mechanisms to large installations
- LDS and HLS heavy-duty series plus WES-G elasto-fluid springs — applications on cranes, automated storage and in steelworks, not only in packaging
- Air springs with a natural frequency between 0.5 and 3.5 Hz — isolation of measuring machines or heavy foundations within the same design family
- Stainless steel metal cushions for −90 °C to +400 °C — resistant to solvents, acids, oils and dust, without hardening or permanent deformation
- WRD-H rotary dampers with a torque of up to 700 Nm — control of flaps, lids and hoods, in stainless steel versions for hygienic environments
Which Weforma codes and series are requested most often?
| Code | Description |
|---|---|
| Mega-Line M8–M24×1.5 | Industrial shock absorbers, small threads |
| Mega-Line M32×1.5–M115×2 | Industrial shock absorbers, large threads |
| Mega-Line 5.0 / 7.5 / 10.0 | Mega-Line series versions |
| LDS | Heavy-duty shock absorber series |
| HLS | Heavy-duty shock absorber series |
| WES-G | Elasto-fluid springs |
| WRD-H 0607 / 0805 / 1208 / 1610 / 2010 | Small rotary dampers |
| WRD-H 2515 / 3015 / 4025 / 6030 | Adjustable rotary dampers, medium sizes |
| WRD-H 7550 / 9565 / 12070 | High-torque rotary dampers |
| WRD-HK | Rotary damper series |
| WRD | Rotary damper series |
| Air spring | Air spring, 60–950 mm diameter |
| PUR buffer | Polyurethane buffer for isolation and damping |
| Metal cushion | Stainless steel metal cushion, −90 °C to +400 °C |
Where is Weforma equipment used?
- Lifting and handling — cranes, automated high-bay warehouses, container logistics
- Steel industry — deceleration of slabs and supports
- Transport — end-of-travel buffer stops for trains, cable cars and movable bridges
- Automation and production lines — deceleration cylinders, speed controls, pallet stops
- Food, pharmaceutical and semiconductors — rotary dampers and stainless steel shock absorbers, clean rooms
How do we supply Weforma in Romania?
We can source Weforma Mega-Line shock absorbers, the heavy-duty LDS and HLS versions, air springs, WRD-H rotary dampers and gas springs, based on the code or the application data. We supply to order, usually in 1–4 weeks; for special designs or large sizes the lead time can be longer. For a correct quotation we need the moving mass, impact speed, available stroke, cycle frequency, mounting orientation and environment (temperature, dust, hygiene). For existing shock absorbers, the code engraved on the body and the mounting thread are useful identification details.
We select a specific model after receiving the mass, speed and stroke of the application, and for deceleration calculations in critical installations the designer's verification remains necessary.
Frequently asked questions about Weforma
What does Weforma make?
Weforma of Stolberg, Germany, makes hydraulic shock absorbers, deceleration cylinders, rotary dampers, gas springs, pallet stops, air springs, PUR buffers and stainless steel metal cushions. They are components for machines and installations with moving masses.
How do I select a Mega-Line shock absorber?
Start from the moving mass, impact speed, available stroke, number of cycles and mounting orientation; these give the energy to be absorbed and the thread required. Send us these data, plus the thread of the old shock absorber (for example M32×1.5), for checking.
Do you supply Weforma products in Romania, and how quickly?
Yes, Weforma shock absorbers and air springs are supplied to order, usually in 1–4 weeks. Stainless steel versions, heavy-duty variants or special parameters can extend the delivery; the quotation includes the confirmed lead time.
Can I replace a worn shock absorber with a Weforma model?
Only if the absorbed energy, stroke and mounting thread match. Equivalence is not judged by outer dimensions: send the engraved code, the machine make and the working parameters, and we check a compatible part.
What do I need to send for an air spring quotation?
The static load on each spring, the desired natural frequency, the installation height, the stroke required, the available pressure and the environment (temperature, chemical agents). Air springs come in diameters of 60–950 mm and forces of 0.5–440 kN, so these data point to the right version.
How do I request a Weforma quotation?
Send the Weforma code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Weforma Dämpfungstechnik GmbH (manufacturer documentation)

