Cooling fluids
Cooling fluid (cooling-lubricating liquid or cooling emulsion) is a chemical product diluted in water, used in machining operations such as turning, milling and grinding to cool the tool and the workpiece, clear the chips and reduce friction at the interface between tool and material. A wrong choice shortens tool life and affects the quality of the machined surface.
Cooling emulsions are diluted from concentrate in water, at a percentage recommended by the manufacturer, and may be mineral-oil based (classic emulsion), semi-synthetic or synthetic (no mineral oil, more chemically stable, with better cooling but weaker lubrication). The correct concentration directly affects both the corrosion protection of the machine tool and the life of the cutting tool; too low a concentration leads to corrosion and rapid wear, too high to foaming and needless cost. What distinguishes a good fluid for industrial use: emulsion stability over time (it does not separate or degrade microbiologically quickly, which would cause odour and faults), compatibility with the machined material (some aluminium alloys react with certain additives), and compatibility with the local water (water hardness can destabilise some formulations). For operators, the safety profile also matters: a low content of irritant compounds and controlled odour during prolonged use.
How to choose
Type of machining (turning, milling, grinding)
Grinding, with high speeds and concentrated heat, usually calls for a fluid with better cooling, while heavy turning or milling operations may need extra lubrication to protect the tool.
Material machined
Aluminium alloys, stainless steels or cast irons react differently to the additives in the fluid; an unsuitable fluid can stain the part, corrode the machine or cut tool life well below normal.
Base type (mineral, semi-synthetic, synthetic)
Mineral fluids lubricate better but are less chemically stable; synthetic ones cool better and are more stable, but offer weaker lubrication in heavy operations. The choice depends on what matters more for the operation concerned.
Hardness and quality of the dilution water
Very hard water can destabilise the emulsion or reduce the effectiveness of the additives; for sensitive installations, check the compatibility of the fluid with the available water before buying large quantities.
Compatibility with the machine tool and filtration system
The recirculation and filtration system and any concentration sensors on the machine tool must be compatible with the chosen fluid type, especially in central systems serving several machines.
Safety requirements and working environment
For operators working next to the machine for long periods, the content of irritant compounds and the odour during prolonged use matter, and for disposal of used fluid, local environmental discharge regulations apply.
What to send for a quotation
- The type of machining (turning, milling, grinding) and the machine tool used
- The material or materials machined routinely
- The type of existing system (individual at the machine or central installation)
- The local water hardness, if known
- The concentration or type of fluid used previously, if the supplier is changing
- The quantity and the required delivery deadline
Typical applications
- CNC lathes
- Metal milling
- Grinding
- Machining operations
- Metal cutting
Maintenance and spare parts
Cooling emulsion degrades over time through microbial contamination (odour, foaming) and through falling concentration because the water evaporates, not the concentrate. The concentration is checked periodically with a refractometer, together with the pH of the emulsion, and in advanced degradation a complete drain and cleaning of the circuit before refilling is recommended. Filtering chips and impurities out of the bath significantly extends the service life of the emulsion.
Brands we quote for this product type
Frequently asked questions
What is the difference between a synthetic and a semi-synthetic cooling fluid?
A synthetic fluid contains no mineral oil and offers very good cooling and high chemical stability, but weaker lubrication, so it suits high-speed operations with low tool load. A semi-synthetic fluid combines a low mineral-oil content with synthetic additives, giving a balance between cooling and lubrication, suited to a wider range of machining operations.
How do you choose the correct concentration of a cooling fluid?
The concentration recommended by the manufacturer for the operation and material concerned is checked in practice with a refractometer, not just from memory or by eye when mixing. Too low a concentration leaves parts and machine exposed to corrosion, while too high increases cost and the risk of foaming without any added benefit.
What should be sent for a quotation, and how long does delivery of a cooling fluid take?
The machining type, the material machined, the system type (individual or central) and, if known, the local water hardness are required. Delivery is to order, usually within 1–4 weeks, depending on the manufacturer and the quantity ordered.
Why does cooling emulsion smell bad after a few weeks of use?
The smell usually comes from microbial contamination of the emulsion, favoured by too low a concentration, stagnant water in the system or a lack of filtration of organic impurities from the bath. Keeping the correct concentration and cleaning the circuit periodically greatly reduce the risk, but in advanced degradation the only solution is a complete drain and refill.
Updated: 2026-11-12

