Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

ADLER supplier in Romania

For ADLER we quote split-body ball valves FE2, FG2 and FM2, three-piece valves FP3, cryogenic valves and APM pneumatic actuators; we need the type, diameter, pressure class, material and fluid.

Founded in 1989 · Headquarters: Santo Stefano Ticino, Italy

Request a quote

Who is ADLER and what does it make?

ADLER is an Italian manufacturer of industrial ball valves, founded in 1989, with production concentrated at Santo Stefano Ticino, near Milan, on a 12,500 m² site. Every ADLER valve is tested before delivery, and the range covers split-body, three-piece, threaded, wafer-type, three-way and four-way, Venturi-bore, tank-bottom, heating-jacketed and cryogenic valves, plus pneumatic actuators, limit switch boxes, solenoid valves and positioners. For a quotation, send us the type code, for example FE2, FM2 or FP3, with the diameter and pressure class.

Two-piece split-body valves with full bore are made to ASME B16.34 or EN 12516-2: FE2 and FF2 in ANSI 150, FG2 in ANSI 300, FH2 in ANSI 600 up to DN 150 and FM2 in PN 10–40 from DN 15 to DN 300. The three-piece full-bore FP3 valve is made from bar or from casting, with threaded or weld ends, from 1/4″ to 4″. Cryogenic valves have a 100 mm or 250 mm extension, and the long version works down to −196 °C with oxygen, nitrogen, argon and LNG, with certifications stated in the manufacturer's documentation and a test at −196 °C.

The quality system holds certifications as per the manufacturer's documentation, and the valves come with declarations of conformity, versions for explosive atmospheres, fire-resistant versions, an anti-static device, fugitive-emission versions and functional-safety versions for the valves, the APM actuators and the ASM 512 limit switch boxes. The range is used in process plants, with liquefied gases and in areas with explosive atmospheres.

What do we supply from the ADLER range?

ProductDescription
Split-body ball valves FE2, FG2, FH2, FM2Two-piece full-bore valves to ASME B16.34 or EN 12516-2: FE2 and FF2 in ANSI 150, FG2 in ANSI 300, FH2 in ANSI 600 from DN 15 to DN 150, FM2 in PN 10–40 and FN2, with face-to-face lengths to EN 558.
Three-piece ball valves FP3The full-bore FP3 valve, made from bar or from casting, from 1/4″ to 4″, in PN 20–PN 100 classes, in carbon steel, stainless steels and special steels, with threaded or weld ends, easy to remove from the pipeline for maintenance.
Cryogenic valves and special versionsCryogenic valves with a 100 mm or 250 mm extension, down to −196 °C, with certifications and tests stated in the manufacturer's documentation, heating-jacketed valves, Venturi-bore valves, three-way and four-way valves and tank-bottom valves, such as FA8 with the stem inclined at 15°.
APM actuators and automation accessoriesAPM pneumatic actuators and manual gear operators, ASM 512 limit switch boxes, solenoid valves, filter regulators and positioners, supplied on ADLER valves; the valves, APM actuators and ASM 512 boxes have functional-safety versions, according to the manufacturer's documentation.

Why ADLER?

  • Every valve tested — production is concentrated at Santo Stefano Ticino
  • Pressure classes from PN 10 to ANSI 600 — FM2 in PN 10–40, FG2 in ANSI 300 and FH2 in ANSI 600
  • Fire-resistant and anti-static design — API 607, BS 6755 part 2 and test to ISO 10497
  • Cryogenic valves down to −196 °C — versions for oxygen, nitrogen, argon and LNG
  • Motorised assembly with functional safety — valves, APM pneumatic actuators and ASM 512 limit switch boxes available in such versions

Which ADLER codes and series are requested most often?

CodeDescription
FE2Split-body ball valve, full bore, ANSI 150, DN 15–200
FF2Split-body ball valve, ANSI 150, DN 50–300
FG2Split-body ball valve, ANSI 300
FH2Split-body ball valve, ANSI 600, DN 15–150
FM2Split-body ball valve, PN 10–40, DN 15–300
FN2Split-body ball valve, EN flanges, high PN classes
FP3Three-piece ball valve, full bore, 1/4″–4″
FA8Tank-bottom valve with the stem inclined at 15°
APMPneumatic actuator for ball valves, in functional-safety version
ASM 512Limit switch box for motorised valves, with the manufacturer's functional-safety versions

Where is ADLER equipment used?

  • High-pressure process plants — FG2 and FH2 valves in ANSI 300 and ANSI 600, in fire-resistant design
  • Industrial gases and LNG — cryogenic valves with a 250 mm extension, down to −196 °C
  • Process plants with fluids that solidify — heating-jacketed valves
  • Process tanks — tank-bottom valves, FA8 type
  • Areas with explosive atmospheres — valves in versions for explosive atmospheres, with APM actuators

How do we supply ADLER in Romania?

We can quote ADLER ball valves in split-body, three-piece, threaded, multi-way and cryogenic versions, as well as motorised assemblies with APM actuators and ASM 512 limit switch boxes. For an accurate quotation, send us the type code from the valve (for example FE2 or FP3), the nominal diameter, pressure class, body and seal material, end type, fluid and temperature. We supply them to order, through EU supply channels, usually in 1–4 weeks; a valve can ship in 24–72 h when the item is in stock, locally or at the supplier. For cryogenic versions or special steels the lead time may be longer.

We quote ADLER valves as new items or motorised assemblies; pipeline installation, limit switch adjustment and the pressure test on site remain with your installation team.

Frequently asked questions about ADLER

What does ADLER make?

At Santo Stefano Ticino, in Italy, ADLER makes industrial ball valves: split-body, three-piece, threaded, wafer, three-way and four-way, cryogenic, heating-jacketed and tank-bottom, plus APM pneumatic actuators, limit switch boxes, solenoid valves and positioners.

How do I choose between the ADLER FE2, FG2, FH2 and FM2 valves?

The main difference is the pressure class and the flange standard: FE2 is in ANSI 150, FG2 in ANSI 300, FH2 in ANSI 600, and FM2 has EN flanges in PN 10–40. Send us the working pressure and temperature, the diameter and the flange standard of your installation, and we will propose the type.

How long does it take you to bring ADLER valves to Romania?

An ADLER valve can ship in 24–72 h when the item is in stock, locally or at the supplier. To order, through EU channels, an ADLER valve usually arrives in 1–4 weeks. For cryogenic valves, large diameters or special materials, depending on the specification, the lead time may be longer.

Can you supply the ADLER valve already motorised?

Yes. ADLER makes APM pneumatic actuators, gear operators, ASM 512 limit switch boxes, solenoid valves and positioners, and the valves, APM and ASM 512 have functional-safety versions, according to the manufacturer's documentation. Tell us the control air pressure, the function (single or double acting), the safe position and the signals required by the automation.

What data do I send for a quotation on ADLER cryogenic valves?

The liquefied gas (oxygen, nitrogen, argon or LNG), the minimum temperature, the diameter and pressure class, the end type and the extension length: 100 mm for temperatures down to around −80 °C or 250 mm for −196 °C. Mention if you require a cryogenic test certificate.

How do I request a ADLER quotation?

Send the ADLER code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: ADLER S.p.A. (manufacturer documentation)