Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

AKO Armaturen & Separationstechnik supplier in Romania

For AKO we quote VMC, VM and VMP pneumatic pinch valves, OV and RV mechanical ones, replacement sleeves and Type A, B and C knife gate valves, on the basis of the medium, the diameter and the working pressure.

Founded in 1984 · Headquarters: Trebur-Astheim, Germany

Request a quote

Who is AKO Armaturen & Separationstechnik and what does it make?

AKO Armaturen & Separationstechnik is a German company from Trebur-Astheim, founded in 1984, specialising in pinch valves and knife gate valves for abrasive, corrosive and fibrous media. The principle is simple: the product flow passes through a rubber sleeve, and the sleeve is squeezed pneumatically or mechanically until it is completely closed. The only part in contact with the product is the sleeve, which is why the valves do not clog with granules, powders, pellets, sludges or liquids loaded with solids.

The range includes pneumatic pinch valves (the VMC, VM, VMP, VF and RVA series, with flanges, internal thread, weld ends, clamp-type connections, a threaded connection for the food industry and a tanker flange), mechanical pinch valves (the OV and RV series, operated by handwheel, pneumatic cylinder or electric actuator), replacement sleeves, including in a conductive design for explosive atmospheres, and knife gate valves between flanges, in three types: Type A with a plate gate, Type B for high-density media and Type C for bulk materials. Knife gate valves are made in DN50–DN1200.

These valves appear in pneumatic conveying of cement and granules, in wastewater and water treatment plants, in the pulp and paper industry, in mining, in power plants, in biogas installations and in the food industry. The choice depends on the medium, the differential pressure, the grain size and the sleeve material, which is why the quotation starts from the series and diameter of the installed valve or from the process datasheet.

What do we supply from the AKO Armaturen & Separationstechnik range?

ProductDescription
Pneumatic pinch valves (VMC, VM, VMP, VF, RVA)Valves with an elliptical body, which squeeze the rubber sleeve with compressed air or liquid, with a pressure difference of at least 2 bar. They are offered with flanges, thread, weld ends and hygienic versions, for shut-off and flow control.
Mechanical pinch valves (OV, RV)Valves in which a pinch bar, guided on two rods, squeezes the sleeve. They are operated by handwheel, pneumatic cylinder or electric actuator, and the working pressure reaches 3–40 bar, depending on type and diameter.
Sleeves for pinch valvesReplacement sleeves for the V, VF, VA, VM, VMC, VMF, VMP, OV, RV and RVA series, plus conductive designs (VX, VFX, VAX, VMX, VMCX, VMFX, VMPX). Replacement is done without a special tool, according to the installation instructions.
Type A, B and C knife gate valvesWafer-type valves between flanges, DN50–DN1200, with EN 1092-2 PN 10 or ANSI B16.5 flanges. Type A has one-sided sealing, Type B has two-sided sealing for dense media, Type C is for powders and granules; the gate is made of AISI 304 or 316 stainless steel.

Why AKO Armaturen & Separationstechnik?

  • The sleeve is the only part in contact with the product — the valve closes tight over granules, powders, sludges and solid particles without clogging
  • Pneumatic and mechanical versions — pneumatic VMC, VM, VMP, VF and RVA for 2–6 bar working pressure, mechanical OV and RV for 3–40 bar, depending on type and diameter
  • Several connection types — EN 1092-1 PN 10/16 and ANSI B16.5 class 150 flanges, G or NPT thread, weld ends, DIN 32676 clamps and DIN 28459 tanker flange
  • Conductive design for Ex zones — pneumatic pinch valves can work in zones 0, 1, 2, 20, 21 and 22 with a conductive sleeve
  • DN50–DN1200 knife gate valves — three types (A, B, C) for the paper industry, chemicals, mining, power plants and the food industry

Which AKO Armaturen & Separationstechnik codes and series are requested most often?

CodeDescription
Serie VMCPneumatic pinch valve, with flanges, thread or weld ends
Serie VMPneumatic pinch valve with internal thread
Serie VMPPneumatic pinch valve with internal thread
Serie VFPneumatic pinch valve with flanges
Serie RVAPneumatic pinch valve with flanges
Serie VTPinch valve with a tanker flange
Serie OVMechanical pinch valve, with handwheel, cylinder or electric actuator
Serie RVMechanical pinch valve
VX / VFX / VAX / VMXConductive sleeves for explosive atmospheres
Knife gate Type AKnife gate valve, one-sided sealing, DN50–DN1200
Knife gate Type BKnife gate valve, two-sided sealing, for dense media
Knife gate Type CKnife gate valve for powders and granules

Where is AKO Armaturen & Separationstechnik equipment used?

  • Pneumatic conveying — silos, cement, pigments and granules
  • Water treatment and wastewater treatment — sludges, slurries and wastewater
  • Paper and pulp — knife gate valves for high-density media
  • Mining and metallurgy — abrasive powders and slurries
  • Chemicals and the food industry — valves with hygienic connections and Ex designs

How do we supply AKO Armaturen & Separationstechnik in Romania?

We can quote AKO pinch valves from the VMC, VM, VMP, VF, RVA, OV and RV series, replacement sleeves and Type A, B and C knife gate valves, supplied to order. Orders are usually fulfilled in 1–4 weeks; large diameters and Ex designs can extend the lead time. For a correct quotation, send us the series or the name on the valve, the diameter, the type of connection, the medium conveyed and its grain size, the working temperature and pressure, the sleeve material and the actuation mode. For replacement sleeves, add the series of the valve and a photo of the nameplate.

The sleeve material or the valve series is recommended on the basis of the exact medium, grain size and temperature, and Ex designs are confirmed on the specific version.

Frequently asked questions about AKO Armaturen & Separationstechnik

What does AKO Armaturen & Separationstechnik make?

The company from Trebur-Astheim, founded in 1984, makes pneumatic and mechanical pinch valves, replacement sleeves and knife gate valves between flanges. The valves are made for abrasive, corrosive and fibrous products: granules, powders, pellets, sludges and liquids with suspended solids.

How do I choose between a pneumatic and a mechanical pinch valve?

The pneumatic version closes with compressed air or liquid, with a pressure difference of at least 2 bar, and works at pressures of 2–6 bar depending on diameter. The mechanical one can be operated by handwheel or actuator and reaches 3–40 bar. Send the pressure, the diameter and the medium.

Can you supply AKO products to Romania, and how fast?

AKO valves and sleeves are supplied to order. The lead time is usually 1–4 weeks; for large diameters or Ex designs, depending on the specification, it can be longer, and items can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm it in the quotation.

How do I identify the right sleeve for an old AKO valve?

The sleeve is determined by the valve series (for example VMC, VM, OV or RV), the nominal diameter, the grade of the sleeve material and the type of connection. If the valve has a nameplate, send a photo. Compatibility is stated only after comparing the series and the dimensions.

What data should I send for a quotation on a pinch valve or a knife gate valve?

Send the medium and its grain size, the temperature, the working pressure, the diameter (DN), the type of connection, the material wanted for the sleeve or the gate and the actuation mode (handwheel, pneumatic, electric). For explosive atmospheres, specify the Ex zone.

How do I request a AKO Armaturen & Separationstechnik quotation?

Send the AKO Armaturen & Separationstechnik code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: AKO Armaturen & Separationstechnik GmbH (manufacturer documentation)