Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Almatec supplier in Romania

For Almatec we quote air-operated double-diaphragm pumps from the E-Series, CXM, CHEMICOR and AHD, pulsation dampeners and replacement diaphragms; we need the code on the nameplate and the liquid pumped.

Founded in 1984 · Headquarters: Duisburg, Germany

Request a quote

Who is Almatec and what does it make?

Almatec makes air-operated double-diaphragm (AODD) pumps in plastic and metal, with an emphasis on compact plastic pumps machined from solid block. The company was founded in 1984 and is headquartered in Duisburg, Germany. For a quotation, send us the pump code from the nameplate (for example E 20 or AD 32), the liquid pumped, the flow and the discharge pressure.

AODD pumps use compressed air to move two flexible diaphragms back and forth, which creates a constant cycle of suction and discharge. They have no shaft seals, are self-priming, can run dry and suit abrasive, viscous or sensitive liquids. The bodies are made of abrasion-resistant polyethylene (PE), chemically resistant PTFE, UHMW-PE or stainless steel, and the Perswing P air control system switches the pump. Many versions are available for explosive atmospheres, according to the manufacturer's documentation.

The plastic E-Series has six sizes, from DN 8 to DN 50, with maximum flows of 0.9–35 m³/h, a clamp-ring construction and flanged connections; it is interchangeable with the old A series. The CXM series is compact, for light and medium duties and for emptying drums. The CHEMICOR series, made of cast stainless steel 1.4408 (SS316), has chambers without dead corners, in sizes AD 20, AD 32 and AD 50. For high pressures there are the AHD and AHS series, which discharge up to 15 bar and are used to feed filter presses; the AHD has an internal pressure booster. The range also includes BIOCOR hygienic pumps for the pharmaceutical and food industries, FUTUR metal-free pumps for semiconductors and in-line or screw-in pulsation dampeners.

What do we supply from the Almatec range?

ProductDescription
E-Series Plastic PumpsCompact AODD pumps in PE or PTFE, with a clamp-ring construction and flanged connections. Six sizes, from DN 8 to DN 50, with maximum flows of 0.9–35 m³/h, interchangeable with the A series; pulsation dampeners are supplied screw-in or flanged.
CHEMICOR Stainless Steel PumpsAODD pumps in precision-cast 1.4408/SS316 stainless steel, with smooth changes of direction and chambers without dead corners. Three sizes, AD 20, AD 32 and AD 50, with the casing split in only two joint planes and an optional drain system.
AHD and AHS High-Pressure PumpsAODD pumps for chemical applications of up to 15 bar, used to feed filter presses. The AHD (15, 25, 40) has an internal pressure booster, with maximum flows of 4, 10 and 20 m³/h; the AHS (15, 25) transmits the air pressure 1:1.
CXM Compact PumpsPlastic AODD pumps for light and medium duties and for emptying drums, with a modular design and seven connection variants: four sizes with NPT thread and three with BSP thread. Optimised product channels ensure good flow and gentle pumping.

Why Almatec?

  • Compact construction from solid PE or PTFE block, resistant to abrasion and aggressive chemicals
  • No shaft seals, self-priming and dry-running, suited to abrasive slurries and viscous liquids
  • AHD and AHS series discharge up to 15 bar without external reinforcement, for feeding filter presses
  • ATEX versions according to the manufacturer's documentation, for solvents and flammable liquids
  • E-Series interchangeable with the old A series, for simple replacement on existing installations

Which Almatec codes and series are requested most often?

CodeDescription
E-SeriesAODD pump in PE or PTFE, DN 8–DN 50, 0.9–35 m³/h
E-Series+E-Series AODD pump in extended material configuration
CXMCompact plastic AODD pump, also for drums
CHEMICOR AD 20AODD pump in 1.4408 stainless steel, size 20
CHEMICOR AD 32AODD pump in 1.4408 stainless steel, size 32
CHEMICOR AD 50AODD pump in 1.4408 stainless steel, size 50
ADXMetal AODD pump
AHD 25High-pressure pump with internal booster, 10 m³/h
AHS 15High-pressure pump, 1:1 pressure transmission
BIOCORHygienic pump for the pharmaceutical industry
FUTURMetal-free pump for semiconductors
Perswing PAir control system for AODD pumps

Where is Almatec equipment used?

  • Chemicals — transfer of acids, bases and solvents with PE and PTFE pumps
  • Industrial water treatment — sampling, wastewater neutralisation and feeding filter presses
  • Paints and coatings — transfer of viscous liquids and suspensions
  • Pulp and paper — polyethylene pumps from the E-Series
  • Battery production and recycling — pumps resistant to process chemicals

How do we supply Almatec in Romania?

We quote Almatec pumps in plastic (E-Series, CXM), stainless steel (CHEMICOR, ADX) and high pressure (AHD, AHS), pulsation dampeners and spare parts: diaphragms, valve balls and seats, air control blocks. For an exact quotation, send us the full code from the pump nameplate or the liquid pumped, its concentration and temperature, the flow, the discharge pressure, the available air pressure and any ATEX requirement. The pumps are supplied to order, usually in 1–4 weeks; diaphragms and valves in stock, locally or at the supplier, can ship in 24–72 h.

Availability of Almatec pumps and parts is checked on request, before the quotation. The material of the diaphragms and valves is chosen according to the liquid you tell us about; compatibility with unusual chemical mixtures is checked on request, and installation of the pump is carried out by your own team.

Frequently asked questions about Almatec

What does Almatec make?

Almatec makes air-operated double-diaphragm (AODD) pumps: plastic pumps from the E-Series and CXM, CHEMICOR and ADX stainless steel pumps, AHD and AHS high-pressure pumps, BIOCOR hygienic pumps, FUTUR metal-free pumps for semiconductors and pulsation dampeners. The company is based in Duisburg, Germany.

How do I choose the material of an Almatec pump?

The material is chosen according to the liquid: polyethylene (PE) resists abrasion well, PTFE resists aggressive chemicals, and the 1.4408 stainless steel of the CHEMICOR series is used where the liquid calls for a metal body. Temperature, particle size and discharge pressure also matter; above the usual pressures, up to 15 bar, we choose the AHD or AHS.

Do you supply Almatec pumps in Romania, and how quickly?

Yes. Almatec pumps are brought in to order, usually in 1–4 weeks, while diaphragms, balls and valve seats in stock, locally or at the supplier, can ship in 24–72 h. For ATEX versions or special materials, the lead time can be longer.

I have an Almatec pump from the old A series. What do I fit in its place?

The E-Series is interchangeable with the old A series, so in many cases the new pump fits the same connections. Send us the code from the old pump's nameplate and the body and diaphragm material, so we can choose the right size and materials from the E-Series.

What data do I send for an Almatec pump feeding a filter press?

Send the type of sludge or slurry, the solids content, the flow at the start of the filtration cycle, the final filter pressure and the available air pressure. The AHD and AHS series discharge up to 15 bar; the AHD uses an internal booster, while the AHS needs air at the discharge pressure.

How do I request a Almatec quotation?

Send the Almatec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: PSG (manufacturer documentation)