Argal supplier in Romania
Plastic diaphragm pumps for corrosive fluids
Founded in 1975 · Headquarters: Brescia, Italy
Who is Argal and what does it make?
Argal is an Italian manufacturer of plastic diaphragm pumps and centrifugal pumps, headquartered in Brescia and active since 1975. The range covers air-operated diaphragm pumps for corrosive or abrasive fluids and centrifugal pumps for transferring industrial liquids. From the portfolio we can quote ASTRAevo and QUANTUM series diaphragm pumps, as well as SATURNevo series centrifugal pumps, all available in chemically resistant material variants.
In the plastic diaphragm pump segment, Argal makes pumps without a dynamic seal (no rotating shaft that could leak), suitable for acids, bases or solvents where a metal centrifugal pump would corrode quickly. The QUANTUM series is built entirely from plastic, with no metal components in contact with the fluid, useful in very corrosive media, and the ASTRAevo FOOD variant is designed for contact with food products. The range has ISO 9001:2015 certification, ATEX compliance for explosive atmospheres and FDA compliance for components in contact with food.
For industry in Romania, Argal makes sense for handling acids, paints, solvents or viscous food products, where a conventional centrifugal pump does not resist chemically or does not tolerate solid particles. Diaphragm pumps have no mechanical seal to maintain, which simplifies maintenance at installations with frequent fluid changes.
What do we supply from the Argal range?
| Product | Description |
|---|---|
| ASTRAevo Series Diaphragm Pumps | Air-operated double diaphragm pumps, driven by compressed air, with no dynamically sealed rotating shaft — the risk of leakage through a mechanical seal is practically eliminated. They are suitable for corrosive, abrasive or viscous fluids, where a conventional centrifugal pump would wear quickly. The ASTRAevo FOOD variant is intended for contact with food products, with FDA-certified materials. For a quotation we need the type of fluid pumped, the flow rate needed and the contact material wanted. |
| QUANTUM / QUANTUM-S Series Diaphragm Pumps | Diaphragm pumps built entirely from plastic, with no metal part in contact with the fluid, designed specifically for strongly corrosive media — concentrated acids, bases or aggressive solvents. The operating principle remains that of air-operated double diaphragm pumps, but the fully non-metallic body eliminates the risk of galvanic corrosion. They are used in chemical and electroplating installations. The customer must specify the fluid pumped and the working pressure needed. |
| SATURNevo Series Centrifugal Pumps | Centrifugal pumps for transferring industrial liquids, built from fibreglass (FRP), in close-coupled or coupled versions. They are used for transferring process liquids, recirculation or industrial water supply, where continuous flow matters more than tolerance to solid particles or extreme corrosion. The correct choice of material depends on the fluid pumped. For a quotation we need the flow rate, the pumping head and the type of fluid. |
| SATURNsump Sump Centrifugal Pumps | Vertical centrifugal pumps, mounted directly in a sump or basin, used for emptying or recirculating liquids from a process tank without needing a separate suction pipe. They are applied in chemical baths, electroplating tanks or process basins in the water treatment industry. The column length is chosen according to the depth of the sump. The customer must specify the depth of the sump and the fluid in the basin. |
Why Argal?
- Diaphragm pumps without a dynamic seal — no rotating shaft that could leak, suitable for corrosive or abrasive fluids
- QUANTUM series built entirely from plastic, with no metal components in contact with the fluid
- ASTRAevo FOOD variant FDA-certified for contact with food products
- ATEX compliance for pumping solvents or flammable fluids in explosive atmospheres
- Plastic diaphragm pumps, without a dynamic seal
- ISO 9001:2015 certification for quality management
Which Argal codes and series are requested most often?
| Code | Description |
|---|---|
| QUANTUM-S (DQS) | Ultra-pure PTFE diaphragm pump, for the semiconductor industry |
| ASTRAevo (DDE) | Diaphragm pump from a quarter inch to two inches |
| QUANTUM (DDQ) | All-PTFE diaphragm pump, for water treatment and chemicals |
| MISTRAL (DDM) | Diaphragm pump of three or four inches, in stainless steel or polyethylene |
| ASTRAevo FOOD | 316L stainless steel diaphragm pump, for food and pharmaceutical |
| ARGALined | Magnetic drive centrifugal pump, lined in ETFE or polypropylene |
| SATURNevo (ZGS/ZMS/ZCS) | Fibreglass centrifugal pump, up to 1,350 cubic metres per hour |
| ROUTE (TMR/ZMR) | Continuous-duty centrifugal pump, mechanical or magnetic variant |
| SATURNsump (KGS) | Vertical fibreglass centrifugal pump, up to 900 cubic metres per hour |
| K2 (KGK) | Vertical polypropylene or PVDF centrifugal pump, up to 275 cubic metres per hour |
Where is Argal equipment used?
- Chemicals and electroplating — transfer of corrosive acids, bases and solvents
- Food industry — pumping viscous products, FDA-certified variant
- Water treatment — transfer of liquids with abrasive content
- Cosmetics and pharmaceuticals — transfer of contamination-sensitive fluids
- Offshore applications — MISTRAL pumps, in stainless steel or polyethylene variants
How do we supply Argal in Romania?
Argal pumps reach the customer through supply channels in the European Union, to order, usually in 1–4 weeks from order confirmation. The brand is supplied to order, so we need the fluid pumped, the flow rate wanted and the contact material to determine the right configuration before quoting. The technical content above comes from the technical documentation of the manufacturer, Argal.
The chemical compatibility of Argal diaphragms with each specific fluid is established on the basis of the safety data sheet of your product.
Frequently asked questions about Argal
What is the difference between the Argal ASTRAevo and QUANTUM pumps?
ASTRAevo covers a wide range of sizes, from a quarter inch to two inches, and is made from several materials, including aluminium and stainless steel, while QUANTUM is made entirely from pure PTFE, designed specifically for aggressive chemical media or process water where contamination with other materials is not acceptable. The choice depends on the fluid handled and the chemical compatibility needed.
What applications is the Argal MISTRAL pump used for?
MISTRAL is a large-capacity diaphragm pump, available in three or four-inch variants, built from stainless steel or high-density polyethylene, suitable for offshore installations and chemical processes with high flow rates. It is recommended where the smaller pumps in the ASTRAevo or QUANTUM range could not cope with the volume of liquid handled.
Do you supply Argal pumps in Romania?
Yes, Argal pumps are brought in selectively from the Argal range, to order, usually in 1–4 weeks, because the wide variety of materials and sizes does not allow a constant stock of our own on the shelf. For a quotation we need the flow rate wanted, the working pressure and the type of fluid handled, in order to recommend the right model.
How do I choose the right Argal centrifugal pump for my installation?
Selection starts from the flow rate needed and the pumping head: SATURNevo covers high flow rates, up to 1,350 cubic metres per hour, ROUTE is designed for continuous duty, and K2 and SATURNsump are vertical pumps for sump mounting. The casing material, fibreglass, polypropylene or PVDF, is chosen according to the chemical aggressiveness of the liquid.
How do I request a Argal quotation?
Send the Argal code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 19 November 2026 · Sources: Argal, Argal S.r.l. (manufacturer documentation)

