EDUR Pumpenfabrik supplier in Romania
Side channel pumps for high pressure
Founded in 1927 · Headquarters: Kiel, Germany
Who is EDUR Pumpenfabrik and what does it make?
EDUR Pumpenfabrik is a German manufacturer of centrifugal pumps, headquartered in Kiel, specialised in solutions configured to the customer's request rather than in a rigid standard catalogue. The range is organised in four lines: Compact Line for monobloc, in-line or self-priming pumps, Performance Line for multistage centrifugal pumps, Multiphase Line for pumps able to handle liquid–gas mixtures, and Mag Line for magnetic-coupling pumps. For the Romanian market we can quote from the EDUR range where the fluid to be pumped is not a clean liquid but a mixture with gas, or where classic mechanical sealing is not acceptable.
What sets the Multiphase line apart is the ability to pump mixtures with up to 30% gas content, through the PBU and LBU series, with flow rates of up to 60 m³/h and pressures of up to 40 bar, at temperatures between -50°C and 140°C. For liquefied gases, EDUR has the multistage LB series, with flow rates of up to 60 m³/h, and the NH/NHKE series, with flow rates of up to 170 m³/h. In the category of specially configured centrifugal pumps, EDUR is a supplier found in German and European industrial installations with high technical requirements.
For multiphase fluids or liquefied gases, EDUR means access to pumps configured for difficult applications, where a standard catalogue centrifugal pump would lose priming or fail under the gas content of the fluid.
What do we supply from the EDUR Pumpenfabrik range?
| Product | Description |
|---|---|
| Multiphase pumps, PBU and LBU series | Centrifugal pumps for multiphase fluids, able to handle liquid mixtures with up to 30% gas content without losing priming. Flow rate of up to 60 m³/h, head of up to 250 m, working pressure of up to 40 bar and temperature between -50°C and 140°C, with a maximum accepted viscosity of 115 mm²/s. Available in several constructions and materials. Typical application: transfer of fluids in processes where gas–liquid separation would be costly; the customer must confirm the gas percentage in the mixture. |
| Pumps for liquefied gases, LB and NH/NHKE series | Multistage centrifugal pumps for liquefied petroleum gases and other liquefied gases, with a flow rate of up to 60 m³/h for the LB series and up to 170 m³/h for the NH series, casing nominal pressure PN 40. Modular construction, adaptable to the specific type of gas and to the temperature conditions of the installation. Typical application: liquefied gas terminals and petrochemical installations; the customer must specify the type of gas handled and the working temperature of the installation. |
| Mag Line pumps with magnetic coupling | Centrifugal pumps with magnetic coupling, without a mechanical seal between motor and rotor, eliminating the risk of leakage with toxic or environmentally hazardous fluids. They are configured per application, like the rest of the EDUR range. Typical application: transfer of hazardous chemicals in installations where a leak is not acceptable for safety or environmental reasons; the customer must provide the fluid type and the flow rate required. |
Why EDUR Pumpenfabrik?
- Multiphase line able to handle mixtures with up to 30% gas content, without losing priming
- Pumps for liquefied gases: LB series, up to 60 m³/h, and NH/NHKE series, up to 170 m³/h
- Mag Line pumps with magnetic coupling, without mechanical seal, for hazardous media
- Modular configuration to the customer's request, not only selection from a fixed catalogue of models
- Member of industry associations and initiatives, including VDMA, Star Pump Alliance and Allianz für Cyber-Sicherheit
Which EDUR Pumpenfabrik codes and series are requested most often?
| Code | Description |
|---|---|
| PBU (multiphase family) | multiphase pump, max. flow rate 60 m3/h |
| LBU (multiphase family) | multiphase pump, max. flow rate 60 m3/h |
| LB (liquefied gases) | multistage pump for liquefied gases, max. flow rate 60 m3/h |
| NHKE-Series | multistage pump for liquefied gases (NH series), max. flow rate 170 m3/h |
| S-Series | self-priming centrifugal pump from Compact Line |
| Compact Line (family) | monobloc, in-line and self-priming pumps |
| Performance Line (family) | multistage centrifugal pumps |
| Multiphase Line (family) | pumps for liquid–gas mixtures |
| Mag Line (family) | pumps with magnetic coupling, without mechanical seal |
Where is EDUR Pumpenfabrik equipment used?
- Energy technology — pumps for power generation installations
- Liquefied gases — transfer of LPG and other liquefied industrial gases
- Cooling technology — industrial cooling circuits
- Industrial cleaning — pumping systems for cleaning processes
- Water and wastewater — centrifugal pumps for treatment plants
How do we supply EDUR Pumpenfabrik in Romania?
We bring in EDUR pumps through EU supply channels, to order, usually within 1–4 weeks. As a manufacturer that configures each pump per application, we do not keep this range on the shelf; stock and lead time are confirmed in the quotation — we work with what the manufacturer confirms for each individual request. For a quotation we need the type of fluid (including the gas percentage, where applicable), the flow rate and pressure required, plus the working temperature of the installation. We recommend direct contact with the EDUR technical team for unusual applications.
The configuration of an EDUR pump for an unusual multiphase application is established through a specific technical request.
Frequently asked questions about EDUR Pumpenfabrik
What does EDUR Pumpenfabrik make?
EDUR makes centrifugal pumps configured to the customer's request, organised in four lines: Compact Line for standard pumps, Performance Line for multistage, Multiphase Line for liquid–gas mixtures and Mag Line with magnetic coupling for hazardous media.
How do I choose an EDUR multiphase pump for my fluid?
You need to tell us the approximate gas percentage in the mixture, the flow rate required and the working pressure of the installation; the PBU and LBU series cover mixtures with up to 30% gas, at flow rates of up to 60 m³/h. Send us these data so we can check the suitable configuration.
Do you supply EDUR Pumpenfabrik pumps in Romania, and how fast?
Yes, we bring in EDUR pumps to order through EU supply channels, usually within 1–4 weeks, depending on the configuration requested. As these are pumps configured per application, we do not keep this range on the shelf, so the exact lead time is set after we receive the technical specifications.
What details should I specify for an EDUR quotation for liquefied gases?
You need to specify the exact type of liquefied gas handled, the flow rate wanted, the working pressure and the installation temperature. With these data we check whether the LB or NH/NHKE series suit the application and confirm the lead time.
How do I request a EDUR Pumpenfabrik quotation?
Send the EDUR Pumpenfabrik code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: EDUR-Pumpenfabrik Eduard Redlien GmbH & Co. KG (manufacturer documentation)