Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

BEGE supplier in Romania

For BEGE we quote Ströter helical-bevel gear motors KS080 and K152, KE stainless steel gear motors, MIG encoders and stainless steel electric motors; we need the type from the nameplate, power, ratio, voltage and mounting.

Founded in 1950 · Headquarters: Sassenheim, the Netherlands

Request a quote

Who is BEGE and what does it make?

BEGE Power Transmission, from Sassenheim, is a Dutch industrial drive company, active since 1950, which designs and builds gear motors, gearboxes, electric motors and MIG magnetic encoders, plus drives made to order for machine builders. The Ströter range is also built at Sassenheim, with the same dimensions, flanges and type designations, so an existing Ströter drive can be replaced without redesigning the machine. For a quotation, send us the type designation from the gear motor nameplate, for example KS080 or K152, and the reduction ratio.

BEGE gear motors are made with helical, parallel shaft, hypoid, bevel, helical-bevel and worm gearing, plus five types of stainless steel gear motors for the food industry. Variants are adapted to the application: shaft length and diameter and keyway, foot, flange or base-flange mounting, voltage, frequency and insulation class, AC or DC motor, single-phase, pole-changing or in ATEX execution, anti-corrosion coatings from class C1 to C5-M and accessories such as brakes, forced ventilation, temperature and vibration sensors or MIG encoders. BEGE stainless steel motors have a smooth housing, without cooling fins, need no paint and withstand pressure washing of up to 100 bar, from 10–15 cm, and water of up to 80 °C.

The MIG encoder is a magnetic encoder, incremental or absolute, mounted as a flange between the motor and the gearbox: it needs no extended fan cover or shaft end on the non-drive side and adds only 7–15 mm to the length of the drive. The vulcanised plastic magnetic ring makes it shock-resistant, the stainless steel version reaches IP69K for pressure washing, and the flange fits the usual IEC and NEMA motors and gearboxes. From the Ströter range, BEGE builds the helical-bevel gear motors K062, KS063, KS080, KS112, K152, K252, K452 and K652, the stainless steel helical-bevel gear motors KE and KEE, the variable-speed gear motors AM and AM/M and the MIG encoders that replace the old MIG 1024 and original MIG types.

What do we supply from the BEGE range?

ProductDescription
BEGE gear motorsGear motors with helical, parallel shaft, hypoid, bevel, helical-bevel and worm gearing, with modular construction and options for shaft, mounting, motor (AC or DC, single-phase, pole-changing, ATEX), environmental protection, C1–C5-M anti-corrosion coating, brakes, forced ventilation and sensors.
Stainless steel gear motors and electric motorsFive types of stainless steel gear motors and stainless steel IEC electric motors for the food industry, with a smooth housing, without cooling fins and without paint, designed for the washdown required by the HACCP, EHEDG and FDA hygiene standards: up to 100 bar and water of up to 80 °C.
MIG magnetic encodersIncremental and absolute magnetic encoders mounted as a flange between motor and gearbox, with a shock-resistant vulcanised plastic magnetic ring, protected from dirt and liquids by the mounting position; the stainless steel version reaches IP69K, and the length of the drive increases by 7–15 mm.
Ströter range (K, KS, KE, KEE, AM)Helical-bevel gear motors K062, KS063, KS080, KS112, K152, K252, K452 and K652, stainless steel gear motors KE and KEE, variable-speed gear motors AM and AM/M and MIG encoders, built at Sassenheim with the same dimensions and type designations, for replacing existing Ströter drives.

Why BEGE?

  • The Ströter range built at Sassenheim — the same dimensions, flanges and type designations for direct replacement
  • Stainless steel gear motors and motors — no paint, for pressure washing in the food industry
  • MIG encoder between motor and gearbox — only 7–15 mm added to the length of the drive
  • Adapted executions — shaft, mounting, voltage, motor type, ATEX and C1–C5-M coatings
  • Helical, parallel shaft, hypoid, bevel, helical-bevel and worm gear motors, plus stainless steel variants — the type is chosen according to the application

Which BEGE codes and series are requested most often?

CodeDescription
K062Ströter helical-bevel gear motor
KS063Ströter helical-bevel gear motor
KS080Ströter helical-bevel gear motor
KS112Ströter helical-bevel gear motor
K152Ströter helical-bevel gear motor
K252Ströter helical-bevel gear motor
K452Ströter helical-bevel gear motor
K652Ströter helical-bevel gear motor
KEStainless steel helical-bevel gear motor, Ströter range
KEEStainless steel helical-bevel gear motor, basic version, Ströter range
AMVariable-speed helical gear motor, Ströter range
AM/MVariable-speed helical-bevel gear motor, Ströter range
MIGFlange-mounted magnetic encoder, fitted between motor and gearbox
MIG 1024Old encoder type, replaced by the current MIG models

Where is BEGE equipment used?

  • Food industry — stainless steel gear motors and motors for pressure-washed lines
  • Bulk materials — compact gear motors for mixers and conveyors
  • Industrial automation — positioning with MIG encoders mounted between motor and gearbox
  • Machine building — drives made to order for equipment builders
  • Maintenance of machines with Ströter drives — the current equivalent part by the type designation on the nameplate

How do we supply BEGE in Romania?

We can quote BEGE gear motors, stainless steel motors and gear motors, MIG encoders and gear motors from the Ströter range, as spare parts or for new machines. For a correct quotation, send us the type designation and serial number from the nameplate, the power, the output speed or reduction ratio, the voltage, the mounting form and the shaft diameter. For encoders, specify whether you need the incremental or absolute variant and the output signal. We bring them in on order, usually within 1–4 weeks; for adapted executions, depending on brand and specifications, the lead time may be longer.

We quote BEGE and Ströter drives as complete items or spare parts, while alignment and mounting on the machine are carried out by your maintenance team.

Frequently asked questions about BEGE

What does BEGE make?

BEGE Power Transmission builds at Sassenheim, in the Netherlands, gear motors with helical, bevel, helical-bevel, hypoid and worm gearing, stainless steel gear motors and motors for the food industry, MIG magnetic encoders and drives made to order. The Ströter range, with the same dimensions, flanges and type designations, is also built there.

How do I choose a BEGE gear motor for a food line?

For pressure-washed areas, stainless steel gear motors are chosen, without paint and without cooling fins, which withstand washing at up to 100 bar and water of up to 80 °C. Send us the torque or power, the output speed, the mounting form, the voltage and whether you need a MIG encoder in IP69K execution.

Do you supply BEGE in Romania and how long does it take?

We bring in BEGE gear motors and encoders on order, usually within 1–4 weeks. A standard item that is in stock, locally or at the supplier, can ship in 24–72 h. For executions with modified shaft, flange, coating or motor, depending on brand and specifications, the lead time may be longer.

I have an old Ströter gear motor. Can you find the replacement?

Yes. BEGE builds the Ströter range with the same dimensions, flanges and type designations, so the designation on the nameplate, for example KS080 or K152, is enough to identify the current variant. Send us a photo of the nameplate, the reduction ratio and the shaft type; for old MIG 1024 encoders we propose the current MIG model.

What data should I send for a MIG encoder quotation?

The type of motor and gearbox between which it is mounted (IEC or NEMA and the flange size), the incremental or absolute variant, the resolution or signal required by the controller, the supply voltage and the working environment. If the line is pressure-washed, tell us: the stainless steel version of the MIG encoder reaches IP69K.

How do I request a BEGE quotation?

Send the BEGE code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: BEGE Power Transmission (manufacturer documentation)