Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Bordignon supplier in Romania

For Bordignon we quote CSX, SMLX and Automotive-line AGS and TGS nitrogen springs, B Feder ISO 10243 springs and BRE50 scrap ejectors; we need the code, the force, the stroke and the installation height.

Headquarters: Rossano Veneto, Italy

Request a quote

Who is Bordignon and what does it make?

Bordignon is an Italian manufacturer of components for stamping and pressing dies: nitrogen springs (gas cylinders), coil springs for dies to ISO 10243, DTAP electronic in-die tapping units and BRE pneumatic scrap ejectors. The headquarters is in Rossano Veneto, in the province of Vicenza, and the technical office and production are in Grigno, in Trentino; the components are made in the company's own plants in Italy, with a UNI EN ISO 9001 quality system. For a quotation, send us the spring code from the body, the force and the stroke.

The High Performance series nitrogen springs, for example CSX, SMLX, MSML, CX, CSMX and MICX, offer much higher forces than the standard ISO 11901 series (CISO) in more compact dimensions, and some of them have the WIPERTECH seal against liquids on the die. For the automotive industry there is the Automotive line, with the AGS, EGS, IGS, LGS, PGS, TGS and VGS series, with safety protections compliant with ISO 11901-5 and VDI 3003 part 1. Used correctly, Bordignon springs reach a life of over 200,000,000 mm of total stroke.

The coil springs for dies, B Feder brand, comply with ISO 10243 and have six load classes, from extra light to super heavy. DTAP is an electronic tapping unit mounted in the die, with a touch panel for one unit or for up to four units, the D-TC sensor that checks tapping in through holes and an air-oil lubrication system. The BRE50 ejector moves stamping scrap with filtered compressed air, at 3–6 bar, with a load of up to 50 kg per chute, and the BRE-CD sensor signals its stoppage before scrap builds up in the tool. The range serves the automotive industry, household appliance production and industrial die making.

What do we supply from the Bordignon range?

ProductDescription
High Performance nitrogen springs (CSX, SMLX, MSML, CX, CSMX, MICX)Gas cylinders for dies, with higher forces than the standard CISO series to ISO 11901 and more compact dimensions. CSX, SMLX, MSML, CX, CSMX, MICX and MCSM have the WIPERTECH seal, which protects against contaminating liquids on the die.
Automotive line nitrogen springs (AGS, EGS, IGS, LGS, PGS, TGS, VGS)Series for dies in the automotive industry, with tested safety systems compliant with ISO 11901-5 and VDI 3003 part 1, which reduce the risks even in improper use.
B Feder ISO 10243 coil springs for diesCompression springs for dies to ISO 10243, in six load classes: extra light, light, medium, heavy, extra heavy and super heavy. They are replaced directly on the standard dimensions of the seats in the die.
DTAP tapping unit and BRE50 scrap ejectorDTAP taps directly in the die, controlled by a touch panel for one or up to four units, with the D-TC sensor and air-oil lubrication. BRE50 transports scrap with filtered compressed air at 3–6 bar, between 0 and 60 °C, with the BRE-CD stoppage sensor.

Why Bordignon?

  • Over 200,000,000 mm of total stroke when used correctly — long intervals between replacements
  • Automotive line, with safety protections to ISO 11901-5 and VDI 3003 — for dies in the automotive industry
  • High Performance series with higher forces in a smaller size — space gained in the die
  • B Feder ISO 10243 coil springs in six load classes — direct replacement on standard dimensions
  • DTAP and BRE50 with monitoring sensors — tapping and scrap removal are supervised in the die

Which Bordignon codes and series are requested most often?

CodeDescription
CSXHigh Performance series nitrogen spring, with WIPERTECH seal
SMLXCompact High Performance series nitrogen spring
MSMLHigh Performance series nitrogen spring
MICXSmall-size nitrogen spring, High Performance series
CISOStandard series nitrogen spring to ISO 11901
AGSAutomotive line nitrogen spring, with protections to ISO 11901-5
TGSAutomotive line nitrogen spring
VGSAutomotive line nitrogen spring
B Feder ISO 10243Coil spring for dies, six load classes
DTAPElectronic in-die tapping unit, with touch panel
D-TCTapping control sensor for through holes, for DTAP
BRE50Pneumatic scrap ejector for dies, 3–6 bar
BRE-CDStoppage sensor for the BRE ejector

Where is Bordignon equipment used?

  • Automotive industry — deep-drawing dies with nitrogen springs from the Automotive line
  • Household appliance production — progressive dies for thin sheet
  • Industrial stamping — scrap removal with BRE50 and in-die tapping with DTAP
  • Die-making workshops — replacing ISO 10243 coil springs and gas springs

How do we supply Bordignon in Romania?

We quote Bordignon nitrogen springs from the High Performance and Automotive series, B Feder ISO 10243 coil springs, DTAP units with accessories and BRE50 ejectors. For an accurate quotation, send us the code engraved on the spring, the initial force, the stroke and the installation height or, for coil springs, the diameter, the length and the load class. Springs in stock, locally or at the supplier, can ship in 24–72 h, and the rest we bring in to order from Italy, usually in 1–4 weeks. For a new die, we can quote the spring list as a group.

We supply Bordignon springs and accessories according to the codes in the die; charging with nitrogen at a different pressure and installation in the tool are done by your die maker.

Frequently asked questions about Bordignon

What does Bordignon make?

In its own plants in Italy, Bordignon makes components for dies: nitrogen springs from the High Performance and Automotive series, B Feder coil springs to ISO 10243, the DTAP electronic in-die tapping unit and the BRE50 pneumatic scrap ejector, with their accessories.

How do I choose a Bordignon nitrogen spring for a die?

Start from the force needed at the beginning of the stroke, the working stroke and the height available in the die. If space is limited, the High Performance series give higher force in the same size; for automotive dies the Automotive line is usually chosen, with protections to VDI 3003. Send us the force, the stroke and the installation height.

Do you supply Bordignon springs in Romania and how fast?

Yes. Springs in stock, locally or at the supplier, can ship in 24–72 h. Series or strokes requested less often we bring in to order, usually in 1–4 weeks, and for configured DTAP units or BRE50 ejectors, depending on the brand and the specifications, the lead time may be longer. The exact lead time appears in the quotation.

Can you replace an existing nitrogen spring in the die with a Bordignon one?

We can check the replacement if you send us the body diameter, the height, the stroke, the initial force, the type of fixing and the type of fitting, if the springs are connected to each other. On these data we look in the CISO, High Performance or Automotive series for a spring that fits the same seat and gives the required force.

What data do I send for a quotation for Bordignon components?

For nitrogen springs: the engraved code, the force, the stroke and the number of pieces. For B Feder springs: the seat diameter, the free length and the load class. For DTAP: the number of units and the thread size. For BRE50: the chute length, the inclination and the amount of scrap per stroke.

How do I request a Bordignon quotation?

Send the Bordignon code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Bordignon Srl (manufacturer documentation)