Comsys supplier in Romania
For Comsys we quote ADF P25, P100, P200 and P300 active filters, the P700 STATCOM compensator and PPM300 modules; for a quotation we need the voltage, the load current and the harmonic measurements.
Founded in 2001
Who is Comsys and what does it make?
Comsys is a Swedish company founded in 2001, specialised in power quality: ADF (Active Dynamic Filter) active harmonic filters, medium-voltage STATCOM compensators and dynamic battery energy storage systems. The ADF active filter works as a computer-controlled current generator, which produces in real time the compensation current needed to cancel harmonics and reactive power. The role is concrete: harmonics produced by frequency converters, rectifiers and switch-mode supplies heat transformers and cables, trip protection devices and can exceed the limits set by IEC 61000 or IEEE 519 standards.
The low-voltage range starts with ADF P25, with a nominal compensation current of 30 A RMS (three-wire, 415 V), continues with the wall-mounted ADF P100, with 70–130 A RMS at 480 V, and with ADF P300, supplied in a cabinet with an optimisation power between 90 and 360 A. ADF P200 covers harmonics up to order 100 and resonances in networks with photovoltaic or wind sources. All are commissioned from a web interface, with no software installed, and can be connected via Modbus TCP. ADF P700 STATCOM is the medium-voltage version, from 1 MVA to 10 MVA, in a 20 or 40 ft container, for electric arc furnaces, port cranes, mills and wind farms.
For integrators and switchboard builders, the PPM300 inverter module and the SCC2 control computer are offered as building blocks, with air or liquid cooling. Applications in Romania are water treatment plants, data centres, marine installations, industrial platforms with many converters and installations with generators, where passive filters risk going into resonance.
What do we supply from the Comsys range?
| Product | Description |
|---|---|
| ADF P25 and ADF P100 | Compact active filters for three-phase low-voltage networks. P25 compensates 30 A RMS at 415 V, while P100 is wall-mounted and covers 70–130 A RMS at 480 V or 90 A at 690 V. Commissioning is done from the ADF Dashboard, through a browser. |
| ADF P300 and ADF P200 | ADF P300 is a modular cabinet filter, with 90–360 A optimisation power, intended for small or large industrial and commercial loads. ADF P200 is aimed at modern networks with renewable sources and can be integrated into a P300 with one or two modules. |
| ADF P700 STATCOM | Medium-voltage STATCOM compensator for dynamic reactive power compensation, flicker reduction and harmonic suppression, between 1 and 10 MVA. It is supplied in a self-contained, air-conditioned building, resembling a 20 or 40 ft container, and can operate in parallel with other units. |
| PPM300 and systems integration | Inverter module, with air or liquid cooling and Open Loop, Closed Loop or Sensorless control, used as a building block in the integration programme. A system can grow from a single module to 90 modules with 15 control units. |
Why Comsys?
- ADF active filters from 30 A (P25) up to 360 A (P300) per cabinet — the power step suited to the load is chosen, without oversizing
- Power that can be extended by connecting several units — the installation can grow with the load, without replacing the initial equipment
- ADF P200 covers harmonics up to order 100 — useful in networks with photovoltaic inverters, where interharmonics and resonances appear
- Control without current transformers (Sensorless Control) — fewer parts to fit and check on the installation
- STATCOM ADF P700 from 1 to 10 MVA — dynamic compensation for electric arc furnaces and port cranes
Which Comsys codes and series are requested most often?
| Code | Description |
|---|---|
| ADF P25 | Compact active filter, 30 A RMS at 415 V |
| ADF P100 | Wall-mounted active filter, 70–130 A RMS at 480 V |
| ADF P100 G4 | G4 generation with HMI-4 interface |
| ADF P200 | Active filter for harmonics up to order 100 |
| ADF P300 | Modular cabinet active filter, 90–360 A |
| ADF P300 G4 | G4 generation of the P300 filter |
| ADF P700 STATCOM | Medium-voltage compensator, 1–10 MVA |
| PPM300 | Inverter module for systems integration |
| SCC2 | Control computer for ADF systems |
| HMI-3 | Graphical interface with colour touchscreen |
| HMI-4 | New-generation graphical interface |
| PPM300 lifting tool | Lifting device for module servicing |
Where is Comsys equipment used?
- Water and wastewater treatment — protection of pump converters
- Data centres — reduction of harmonics from uninterruptible power supplies and servers
- Steel and metallurgy — STATCOM for electric arc furnaces
- Marine and port installations — isolated networks with generators and cranes
- Renewable energy — photovoltaic and wind farms, battery systems
How do we supply Comsys in Romania?
We can quote Comsys active filters, PPM modules and accessories, starting from your network data. Supplied to order; depending on the specification, the lead time may be longer, and the exact lead time is confirmed in the quotation. For a correct quotation, send us the voltage and the number of wires, the nominal load current, the type of consumers (converters, rectifiers, power supplies), the harmonic measurements, if available, and the target compliance standard.
The sizing of an active filter is confirmed only with harmonic measurements on the installation, and commissioning is carried out separately from the delivery of the equipment.
Frequently asked questions about Comsys
What does Comsys make?
Comsys makes ADF active harmonic filters for low voltage, the ADF P700 STATCOM compensator for medium voltage, PPM300 inverter modules for systems integration and dynamic battery energy storage systems. The company is Swedish and was founded in 2001.
How do I choose between ADF P100, P200 and P300?
P100 is wall-mounted, with 70–130 A RMS at 480 V; P300 is modular in a cabinet, with 90–360 A; P200 covers harmonics up to order 100 and resonances from networks with renewable sources. The choice starts from the measured harmonic current. Send us the measurement data of the switchboard.
How long does it take to supply an ADF filter in Romania?
They are supplied to order. As they are equipment configured for each installation, the lead time may be longer than for catalogue parts, depending on the specification; the exact date is confirmed in the quotation, after the configuration has been checked.
Can I replace capacitor banks or passive filters with an active filter?
It is possible, if the problem is harmonics or variable reactive power, but the decision depends on the harmonic spectrum, the voltage and the space in the switchboard. Send us the single-line diagram, the nominal current and the measurements, so that we can check whether an ADF solution is suitable.
What data do you need for a quotation on a Comsys filter?
We need the network voltage and the number of wires, the nominal load current, the type of non-linear consumers, the THD measurements or the harmonic spectrum, the target compliance standard (IEC 61000 or IEEE 519) and the installation conditions. For STATCOM, add the reactive power and the type of load.
How do I request a Comsys quotation?
Send the Comsys code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Comsys AB (manufacturer documentation)

