Cressall Resistors supplier in Romania
Braking resistors for variable speed drives
Headquarters: Leicester, United Kingdom
Who is Cressall Resistors and what does it make?
Cressall Resistors is a British manufacturer of industrial electrical resistors, based in Leicester, with a history of over 100 years in the field. The portfolio covers neutral earthing resistors (NER) for high, medium and low voltage networks, dynamic braking resistors for variable speed drives and motors, portable load banks for testing batteries and generators, and resistors for railway traction. For electrical installations in Romania, Cressall covers in particular network protection and the dissipation of braking energy.
Cressall earthing resistors can be sized for any current or voltage value required by the project, with protection ratings from IP23 to IP56 and stainless steel construction for corrosion resistance, in line with the IEC 60076-25 and IEEE C57-32a standards. On the dynamic braking side, the ES range covers continuous power of up to 25 kW and braking power of up to 250 kW, while the punched-grid or expanded-mesh resistors go up to 100 kW continuous and 1 MW in braking duty.
For Romania, Cressall makes sense for network projects where an earthing resistor sized case by case is needed, for high-power variable speed drives that dissipate braking energy and for testing batteries or generators with portable load banks.
What do we supply from the Cressall Resistors range?
| Product | Description |
|---|---|
| Neutral Earthing Resistors (NER) | Resistors for earthing the neutral of transformers and generators, individually sized for the current and voltage required by the high, medium or low voltage network. Stainless steel construction, with protection ratings between IP23 and IP56, allows installation both indoors and in outdoor substations, in line with the IEC 60076-25:2023 and IEEE C57-32a standards. They are used to limit the fault current on an earth fault. |
| Dynamic Braking Resistors (ES and DBR ranges) | Resistors that dissipate the regenerative braking energy from variable speed drives and electric drives, with continuous power from a few kW up to 100 kW and braking power of up to 1 MW for the punched-grid or expanded-mesh variants. The ES range covers smaller applications, up to 25 kW continuous, while the grid series are dedicated to large industrial drives. |
| Portable Load Banks | Portable units for testing batteries, generators and UPS systems under real load, useful for periodic checks without using the actual equipment in the installation. They allow a controlled load to be simulated, to check whether the generator or the battery holds its rated parameters under stress. |
| Railway Traction Resistors | Braking, control and trackside resistors dedicated to railway rolling stock, sized for the repeated acceleration-braking cycles specific to electric traction. The construction withstands the vibration and temperature variations specific to installation on the vehicle or along the track. |
Why Cressall Resistors?
- Over 100 years of manufacturing industrial resistors, with earthing resistors sized for any current or voltage required
- Dynamic braking resistors: the ES range up to 25 kW continuous and 250 kW in braking duty, and the expanded-mesh or punched-grid variants up to 100 kW continuous and 1 MW in braking duty
- Portable load banks for testing batteries, generators and UPS systems on site
- Quality, environmental and occupational safety certifications, according to the manufacturer's documentation
- Resistors dedicated to railway traction - braking, control and trackside installation
Which Cressall Resistors codes and series are requested most often?
| Code | Description |
|---|---|
| NER for high voltage | Earthing resistor for HV networks |
| NER for medium voltage | Earthing resistor for MV networks |
| NER for low voltage | Earthing resistor for LV networks |
| ES range - braking resistor | Continuous power up to 25 kW |
| DBR range - braking resistor | Dynamic braking resistor for drives |
| Expanded-mesh resistor | Continuous power up to 100 kW |
| Punched-grid resistor | Braking power up to 1 MW |
| Portable load bank | Testing of batteries, generators and UPS |
| Pre-insertion resistor | Reduces inrush currents |
| Surge suppressor | Protection against voltage peaks |
| Filtru HV | Filtering for HVDC and VSC applications |
| Traction braking resistor | Dissipation of railway braking energy |
| Traction control resistor | Speed control for railway vehicles |
| Trackside resistor | Installation on the railway track, not on the vehicle |
| Packaged earthing transformer | Complete transformer plus resistor set |
Where is Cressall Resistors equipment used?
- Power generation - earthing resistors for generators
- Renewable energy - wind, solar, biomass, wave/tidal
- Rail transport - braking and control resistors for traction
- Marine and offshore - resistors for ship electrical systems
- Data centres - load banks for UPS testing
- Motor control - dynamic braking resistors for drives
How do we supply Cressall Resistors in Romania?
For Cressall Resistors, we work from the manufacturer's technical documentation. Each earthing resistor is sized for the project, so we bring in the product to order, with a lead time confirmed after technical sizing; for equipment built to specification, the lead time may be longer depending on the specifications. For a quotation we need the voltage and the fault current of the network (for NER) or the braking power and the drive voltage (for dynamic resistors). These products are mostly built to order.
The lead time for NER products, built to specification, is set after the technical sizing of the resistor.
Frequently asked questions about Cressall Resistors
What products does Cressall Resistors make?
Cressall Resistors makes neutral earthing resistors for electrical networks, dynamic braking resistors for variable speed drives, portable load banks for testing batteries and generators, and resistors dedicated to railway traction. Each earthing resistor is sized individually for the current and voltage required by the project.
How is a Cressall earthing resistor sized?
Sizing starts from the nominal network voltage, the fault current desired on an earth fault and the operating time required (continuous or timed). Send us these data, plus the protection rating needed (indoor or outdoor), so that we can identify the right construction from the Cressall range.
Do you supply Cressall Resistors resistors in Romania?
Yes, we bring in Cressall resistors to order, with a lead time confirmed after technical sizing (for equipment built to the project, the lead time may be longer depending on the specifications). Most products are built to the project, so the exact lead time depends on the complexity of the sizing.
What details should I specify for a braking resistor quotation?
Send the braking power required (continuous and peak), the drive voltage and the duration of the braking cycles, if they are repetitive. These data allow us to choose between the ES range, the expanded-mesh range or the punched-grid range.
How do I request a Cressall Resistors quotation?
Send the Cressall Resistors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Cressall Resistors Ltd (manufacturer documentation)

