Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Dinkle supplier in Romania

For Dinkle we quote DIN rail terminal blocks from the DK, AK and DP series, barrier terminals, NEMA terminals and PCB connectors, plus relays, power supplies and surge arresters; for a quotation we need the terminal code, the conductor cross-section, the voltage, the current and the number of poles.

Founded in 1983 · Headquarters: New Taipei City, Taiwan

Request a quote

Who is Dinkle and what does it make?

Dinkle is a Taiwanese manufacturer of connection terminals (terminal blocks), founded in 1983, based in New Taipei City, with production and an electrical testing laboratory at Kunshan, in China. The core programme includes terminal blocks for TS-35/32 DIN rail, barrier terminals, NEMA terminals and terminals for printed circuits. Around them, assembly tools and electronic interface products have been added: distribution and signal modules, industrial relays, power supplies, surge arresters, industrial Ethernet switches and enclosures for electronics.

For DIN rail terminal blocks the difference is made by the connection method. The screw series (for example DK2.5N, DK4N, DK6N and DK10N) uses a carbon steel cage with a clamping screw; the spring series (AK1.5, AK2.5, AK4, AK6) has a stainless steel spring and a copper bar with a ridged surface; the push-in series (DP1.5N, DP2.5N, DP4N, DP6N) allows the conductor to be inserted without a tool. For power distribution there are stud terminals and terminals for 10×3 mm busbars. Barrier terminals have a pitch between 6.35 and 13 mm and work at voltages of 150–600 V and currents of 10–40 A, while NEMA rail terminals cover currents from 15 A to 620 A.

In an automation or distribution panel, Dinkle is relevant for upgrades and maintenance work, where terminals, jumpers, end covers and marking tags have to be replaced or added, as well as interface modules between the programmable controller and field equipment.

What do we supply from the Dinkle range?

ProductDescription
DIN rail terminals with screw, spring and push-in connectionThe DK (screw, for example DK2.5N at 20 A and DK10N at 60 A, 600 V), AK (spring, AK2.5 at 20 A and AK6 at 35 A) and DP (push-in, DP2.5N at 20 A and DP6N at 40 A) series for TS-35/32 rail, with marking accessories, bridges and covers.
Barrier terminals and NEMA terminalsBarrier terminals with a pitch of 6.35–13 mm, single-level, two-level, pluggable and feed-through panel types, compliant with UL1059. Panel and rail NEMA terminals, with currents between 15 A and 620 A, for power distribution in panels.
Printed circuit terminals and connectorsPCB terminals with screw, spring or direct insertion connection, plugs and sockets, terminals for transformers and feed-through panel terminals. Some products are also supplied packed on reel tape.
Interface modules, relays and protectionDistribution, signal and relay modules, pluggable industrial relays (RER), 24 V DC power supplies (0165N series), RES2 surge arresters and industrial Ethernet switches with a PoE option.

Why Dinkle?

  • Three connection methods on the same DIN rail — screw (DK), spring (AK) and push-in (DP), so the terminal is chosen by the installation environment and the wiring time
  • NEMA rail terminals from 15 A to 620 A, with a two-level design for dense wiring
  • Terminals with a pitch of 6.35–13 mm and 150–600 V, 10–40 A, with partition walls on two or three sides to guide the conductors
  • Surge arresters for AC and DC, including intrinsically safe versions, for sensors, flowmeters, solenoid valves and controller inputs and outputs
  • Industrial Ethernet switches with a wide supply voltage of 12–56 V DC and an operating temperature between -40 °C and +75 °C

Which Dinkle codes and series are requested most often?

CodeDescription
DK2.5NScrew rail terminal, 600 V, 20 A
DK6NScrew rail terminal, M4, 600 V, 50 A
DK10NScrew rail terminal, M4, 600 V, 60 A
AK2.5Spring rail terminal, 600 V, 20 A
AK6Spring rail terminal, 600 V, 35 A
DP2.5NPush-in rail terminal, 5.1 mm width, 600 V, 20 A
DP6NPush-in rail terminal, 600 V, 40 A
DKM25Rail terminal with M6 stud, 100 A
DKZ4Rail terminal for busbar distribution, M4
DKB15NNEMA rail terminal, DKB series, from 15 A
DKU20NEMA rail terminal, DKU series
2ESDV-XXPPrinted circuit connector, 5.08 mm pitch, 300 V
RER-M2CPluggable industrial relay, RER series
RES2-20-1PAC surge arrester, type 2, single pole
0165N-24V120W1AC24 V DC power supply, 120 W

Where is Dinkle equipment used?

  • Industrial automation — wiring of control panels and controller cabinets
  • Power distribution — NEMA terminals, stud terminals and busbar terminals in panels
  • Rail transport — terminals and modules for control cabinets
  • New energy and process equipment — surge protection and signal interfaces
  • Electronic equipment manufacturing — terminals and connectors for printed circuits

How do we supply Dinkle in Romania?

We can quote Dinkle connection terminals for DIN rail (DK, AK, DP), barrier and NEMA terminals, connectors for printed circuits, relays and interface modules. We need the terminal code, the maximum conductor cross-section, the voltage and the current, the rail type, the width on the rail, the colour and the accessories needed: bridges, covers, marking tags. For modules and protection devices we add the supply voltage and the signal type. Terminals and accessories are supplied to order, usually in 1–4 weeks; they can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.

Dimensional compatibility with an existing terminal is confirmed from the exact code, the width on the rail and the conductor cross-section.

Frequently asked questions about Dinkle

What does Dinkle make?

Since 1983 Dinkle has made connection terminals for DIN rail, barrier terminals, NEMA terminals and connectors for printed circuits, plus assembly tools, industrial relays, interface modules, power supplies, surge arresters, Ethernet switches and electronics enclosures. It is based in New Taipei City, Taiwan.

How do I choose between screw, spring and push-in terminals?

The screw connection is the usual method and covers a wide range of conductor cross-sections. Spring terminals hold without re-tightening and are wired quickly, while push-in ones take the conductor without a tool. Send us the cross-section, the conductor type (solid, flexible or with ferrule) and the installation environment, so that we can propose the series.

Can I replace an existing terminal with a Dinkle one?

Send us the code on the current terminal, the maximum conductor cross-section, the width on the rail, the rated voltage and current and the rail type. We compare these data with the suitable Dinkle series (DK, AK or DP) and confirm in the quotation what can be fitted, including the bridges and covers.

Can Dinkle terminals be supplied in Romania and how soon?

Yes, they are supplied to order. The lead time is usually 1–4 weeks, and they can ship in 24–72 h when the item is in stock, locally or at the supplier. For large quantities or special colours the lead time can be longer; we confirm it in the quotation.

What data do I send for a surge arrester or a power supply?

For an arrester we need the network type (AC or DC), the voltage, the number of poles and whether an intrinsically safe version is required. For a power supply: the power, the output voltage and the input voltage. With these data we choose the suitable family from the Dinkle programme.

How do I request a Dinkle quotation?

Send the Dinkle code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Dinkle International (manufacturer documentation)