Conax Technologies supplier in Romania
For Conax Technologies we quote sheathed thermocouples, RTDs, PG, MHC and EG fittings, HL and HLPL feedthroughs and Ex/MBS sensors; we need the element type, temperature, pressure and the diameter to be sealed.
Headquarters: Buffalo, New York, USA
Who is Conax Technologies and what does it make?
Conax Technologies is an American manufacturer based in Buffalo, New York State, specialising in three areas: temperature sensors, compression sealing fittings, and cable assemblies and wire harnesses. The sensors include sheathed thermocouples made from mineral-insulated cable, in types K and N for work up to 1260 °C, in types E, J and T for narrower ranges and in types S, R, B and C for higher temperatures, as well as platinum resistance temperature detectors (RTD), wire-wound or thin-film, and nickel or copper ones. The calibration laboratory holds accreditations according to the manufacturer's documentation, and the quality system holds certifications indicated in the manufacturer's technical documentation for the design and manufacture of temperature sensors.
The sealing fittings use a soft sealant, mechanically compressed, instead of epoxy resin, so the cable, probe or electrode can be installed, adjusted and replaced. The PG/HPG series suit elements from 1.0 to 47.5 mm, MK is stainless steel for vibration, EG insulates electrically up to 2000 V DC, and EGT/HEGPK with PTFE up to 8000 V DC. Multiple elements are sealed with MHC (1–16) or MHM (1–27), TG for up to 16 conductors of 8–24 AWG and HD for 12–60 wires without resin or potting compound. For hazardous areas, HL and HLPL have versions according to the manufacturer's documentation; HPEG and HPPL work at pressures up to 2070 bar. The Ex/MBS series is the explosion-proof bearing sensor series, with double sealing against oil infiltration.
The selection starts from the element type (thermocouple, RTD, probe, electrode), the temperature, the pressure, the number of wires and the classified area. The complete code is checked before the quotation.
What do we supply from the Conax Technologies range?
| Product | Description |
|---|---|
| Thermocouples and RTDs | Assemblies of sheathed thermocouples with mineral-insulated cable in types K, N, E, J, T, S, R, B and C, as well as platinum RTDs, wire-wound or thin-film (style M), and copper or nickel ones (style E), with terminal heads and mounting fittings of your choice. |
| Single-element fittings | PG/HPG series for elements from 1.0 to 47.5 mm, stainless steel MK for vibration, EG for electrical insulation up to 2000 V DC, EGT and HEGPK with PTFE and split PGS, for probes with attached connectors. |
| Fittings for multiple elements and wires | MHC for 1–16 elements, MHM for 1–27, TG for conductors of 8–24 AWG, HD for 12–60 wires, PL for power cables, HPEG and HPPL at pressures up to 2070 bar and FSA/FCA for optical fibre. |
| Ex/MBS sensors and cable assemblies | Ex/MBS are explosion-proof temperature sensors for bearings, with primary and redundant sealing. The range also includes cable assemblies and wire harnesses designed to order, as well as LeakDefender systems for atmospheric leak detection. |
Why Conax Technologies?
- Soft-sealant fittings — no epoxy resin, so the sealed element can be installed and adjusted without destroying the seal
- Thermocouples from type K to type B — base-metal (types K and N, up to 1260 °C) and noble or refractory metals for higher temperatures
- EGT series with PTFE — electrically insulated feedthrough up to 8000 V DC and high chemical resistance
- Ex/MBS for bearings — explosion-proof sensors with redundant sealing, against oil that could enter the junction box
- Calibration laboratory with accreditations stated in the manufacturer's documentation — calibration for temperature sensors, including AMS2750 requirements
Which Conax Technologies codes and series are requested most often?
| Code | Description |
|---|---|
| PG | Compression sealing fitting, single element |
| HPG | Sealing fitting for higher pressures |
| MK | Midlock, stainless steel, for vibration |
| EG | Electrically insulated fitting, up to 2000 V DC |
| EGT | Insulated fitting, with PTFE, up to 8000 V DC |
| PGS | Split fitting for probes with connectors |
| TG | Fitting for bare conductors, 8–24 AWG |
| MHC | Ceramic multi-hole fitting, 1–16 elements |
| MHM | Metal multi-hole fitting, 1–27 elements |
| HD | High-density feedthrough, 12–60 wires |
| PL | Feedthrough for power cables, 600 V AC / 850 V DC |
| HPEG | High-pressure fitting, up to 2070 bar |
| HL | Fitting for hazardous areas, with approvals according to the manufacturer's documentation |
| HLPL | Feedthrough for hazardous areas, with versions for areas with explosion risk |
| FSA | Optical fibre feedthrough |
| Ex/MBS | Explosion-proof temperature sensor for bearings |
Where is Conax Technologies equipment used?
- Power — fittings and sensors for power plants
- Semiconductors — fittings and LeakDefender leak detectors
- Oil and gas — explosion-proof bearing sensors and HL, HLPL fittings
- Furnaces and autoclaves — AMS2750 thermocouples and sealed feedthroughs
- Steel and heavy industry — thermocouples for melting, casting and annealing
How do we supply Conax Technologies in Romania?
We can quote Conax Technologies thermocouples and RTDs, compression sealing fittings, Ex/MBS sensors and cable assemblies. They are supplied to order; the lead time is usually 1–4 weeks, and for custom designs it can be longer. For a correct quotation send the thermocouple type or the fitting series (for example PG or MHC), the element diameter, the working temperature and pressure, the immersion length, the number of wires and the classified area. The exact lead time is confirmed in the quotation.
Each fitting or sensor is chosen according to the temperature, the pressure and the element to be sealed, so we confirm a series once we have this data.
Frequently asked questions about Conax Technologies
What does Conax Technologies make?
Conax Technologies, from Buffalo, makes temperature sensors (thermocouples, RTDs, mineral-insulated cable), compression sealing fittings for wires, probes, electrodes and optical fibre, cable assemblies and wire harnesses, and Ex/MBS explosion-proof bearing sensors.
How do I choose a sealing fitting for several wires?
It depends on the number, diameter and insulation: MHC for 1–16 elements up to 3.0 mm, MHM for 1–27, TG for bare conductors of 8–24 AWG and HD for 12–60 wires. Send the temperature, the pressure, and the number and diameter of the elements, and we establish the series.
Can you supply Conax products in Romania and how fast?
Yes. Conax sensors and fittings are supplied to order, usually in 1–4 weeks. Delivery of Conax parts can be in 24–72 h when the item is in stock, locally or at the supplier. Custom thermocouples can take longer, and the exact lead time is shown in the quotation.
Can I reorder a Conax thermocouple using the code on the label?
Yes, the code on the label and the thermocouple type allow us to check the sheath, the diameter, the length and the terminal heads. A different model is not proposed before checking the sheath, the diameter and the length. Send a photo of the label, the type (K, N, S etc.) and the working conditions.
What data do I send for a quotation for an HL or HLPL fitting?
State the element to be sealed (cable, probe, wires), the diameter, the pressure and temperature, the number of wires and the area classification (CSA, ATEX or IECEx). HL has approvals, and HLPL has versions for areas with explosion risk, according to the manufacturer's documentation. With this data we check the exact series before issuing the quotation.
How do I request a Conax Technologies quotation?
Send the Conax Technologies code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Conax Technologies (manufacturer documentation)

