Contelec supplier in Romania
For Contelec we quote contactless absolute encoders from the Vert-X line (Vert-X 22, 37 MT, 40E MT, TI), IMU inclination sensors and conductive plastic or cermet potentiometers; for a quotation we need the code on the label, the interface and the supply voltage.
Headquarters: Biel/Bienne, Switzerland
Who is Contelec and what does it make?
Contelec makes sensors for measuring angle and linear displacement: contactless absolute encoders from the Vert-X line, IMU inclination sensors and precision potentiometers. The company is headquartered in Biel/Bienne, Switzerland, and has worked in the field since the 1960s. Its sensors are found on mobile machinery, cranes, agricultural and construction machines, energy installations and measuring equipment.
The basic principle of the Vert-X family is contactless measurement, so there is no mechanical wear of the measuring element. The range goes from miniature encoders to heavy-duty versions, with analogue, PWM, SPI, CANopen or CAN J1939 output, and some types have redundant signal processing and IP68/IP69K protection. Vert-X 22 has a 22 mm stainless steel housing, a ball bearing and withstands a radial shaft load of up to 50 N. Vert-X TI is mounted by direct plug-in connection to the system, not through an integrated cable, which simplifies replacement.
For counting revolutions, Vert-X 37 MT and Vert-X 40E MT work without a battery and without a gearbox: the position per turn and the number of turns are measured magnetically. The 40E MT version is bearingless and has a resolution of 16 bits for angle and 16 bits for the turn counter, in a CAN J1939 version at 8…35 V. Contelec potentiometers, with conductive plastic or cermet, also exist in hollow-shaft versions and for high temperatures. When replacing a unit on existing machinery, the interface and the supply voltage matter, because two encoders with the same housing can have different outputs.
What do we supply from the Contelec range?
| Product | Description |
|---|---|
| Vert-X absolute encoders (contactless) | A family of absolute encoders from miniature sizes to heavy-duty ones, with analogue, CANopen or CAN J1939 output. Vert-X 22 has a 22 mm stainless steel housing and an M10x0.75 threaded bushing; several versions have a redundant signal and IP68/IP69K protection. |
| Multiturn encoders without battery (Vert-X 37 MT, 40E MT) | They measure the position per turn and the number of turns magnetically, without a gearbox and without a backup battery. Vert-X 40E MT is bearingless, with 16 bits for angle and 16 bits for the turn counter, which allows compact integration into the customer's machine. |
| Vert-X TI encoders with direct connection | Encoders that plug into the surrounding system, without an integrated cable, for applications with heavy wear or frequent changes. The versions include 4–20 mA output at 11…35 V, 0.1–10 V voltage at 10.8…35 V, CANopen at 8…35 V, as well as 5 V versions and versions with a redundant signal. |
| Potentiometers and IMU inclination sensors | Precision potentiometers with conductive plastic or cermet, with hollow-shaft versions and versions for high temperatures, alongside IMU inclination sensors. They are chosen by electrical travel, resistance and the type of shaft or mounting. |
Why Contelec?
- Contactless, wear-free measurement — Vert-X encoders have a long service life under vibration, humidity and dust
- Interfaces for mobile and industrial machines — analogue, PWM, SPI, CANopen, CAN J1939, plus redundant versions
- Multiturn encoders without battery and without gearbox — Vert-X 37 MT and 40E MT, useful on cranes and telescopic booms
- Replaceable mounting — Vert-X TI connects directly, without an integrated cable, so changing it in the field is quick
- Conductive plastic and cermet potentiometers — hollow-shaft versions and versions for high temperatures
Which Contelec codes and series are requested most often?
| Code | Description |
|---|---|
| Vert-X 13 | Contactless absolute encoder, miniature family |
| Vert-X 22 | Absolute encoder, 22 mm stainless steel housing, M10x0.75 threaded bushing |
| Vert-X 24 | Contactless absolute encoder from the Vert-X line |
| Vert-X 26 | Contactless absolute encoder from the Vert-X line |
| Vert-X 28 | Contactless absolute encoder from the Vert-X line |
| Vert-X 51 | Absolute encoder from the Vert-X line |
| Vert-X 88 | Absolute encoder from the Vert-X line |
| Vert-X TI | Absolute encoder with direct connection, without integrated cable |
| Vert-X 28 MT | Multiturn absolute encoder |
| Vert-X 37 MT | Multiturn absolute encoder without battery and without gearbox |
| Vert-X 46 MT | Multiturn absolute encoder |
| Vert-X 40E MT | Bearingless multiturn encoder, 16 bits angle plus 16 bits turn counter |
| Vert-X 22E | Contactless absolute encoder, version 22E |
| Vert-X 31E | Contactless absolute encoder, version 31E |
Where is Contelec equipment used?
- Mobile cranes and telescopic booms — measuring angle, inclination and extension
- Agricultural and construction machines — angular position on booms and mechanisms, with CAN J1939
- Energy — angular position measurement applications
- HVAC applications — angle measurement on actuators and mechanisms
- Motor feedback and measuring instruments — precise angular position
How do we supply Contelec in Romania?
We can quote Vert-X encoders, IMU inclination sensors and Contelec potentiometers. For a correct quotation, send the code on the label or the datasheet of the old sensor, the required interface (analogue, CANopen, CAN J1939), the supply voltage and the type of shaft or mounting. It can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise we bring it in to order, usually in 1–4 weeks, and the final lead time appears in the quotation.
For a replacement encoder we check the match of interface, voltage and mounting on the basis of the full code, not only the size of the housing.
Frequently asked questions about Contelec
What does Contelec make?
Contelec makes contactless absolute encoders from the Vert-X line (single-turn and multiturn), IMU inclination sensors and conductive plastic or cermet potentiometers. The company is headquartered in Biel/Bienne, Switzerland, and its sensors are used on mobile machinery, cranes, and agricultural and construction machines.
What is the difference between a single-turn and a multiturn encoder?
A single-turn encoder gives the angular position within one rotation. A multiturn one also counts the rotations: Vert-X 37 MT and 40E MT do this magnetically, without a battery and without a gearbox, so they keep the position even when the supply has been switched off, which matters on telescopic booms or long mechanisms.
What output variants does the Contelec Vert-X 13 encoder have?
Vert-X 13 has a 5 V supply and four output variants: analogue 10…90 % of the supply voltage, single or redundant, PWM and SPI (both single). The housing diameter is 13 mm. We confirm the full code with the quotation.
Can I replace an old Vert-X with a newer type?
Sometimes yes, but it depends on the interface, the supply voltage, the shaft type and whether the signal is redundant or not. Send the old code and we check the suitable version before the quotation, so that no differences in output or mounting appear.
For a quotation on a Vert-X 22 or Vert-X 28 encoder, what details do I send?
The full code on the label, the interface (analogue, 4–20 mA, CANopen, CAN J1939), the supply voltage, the shaft or mounting type and, if possible, a photograph of the sensor. With these details we identify the exact series and reply with the lead time and availability.
How do I request a Contelec quotation?
Send the Contelec code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Contelec (manufacturer documentation)

