DIS Sensors supplier in Romania
For DIS Sensors we quote inclinometers from the QG30-KI series, tilt switches, acceleration sensors and rotary encoders QR30, QR40 and QR20EMN; we need the full code, the output wanted, the connection type and the operating environment.
Headquarters: Soest, Netherlands
Who is DIS Sensors and what does it make?
DIS Sensors is a company in Soest, in the Netherlands, that develops and makes tilt and angle sensors. The range covers inclinometers, tilt switches, acceleration sensors and absolute rotary encoders, plus cables, accessories and tailored solutions. The housings, the firmware and the cable assemblies with connectors are made in the same company, and part of the range also exists in safety versions.
The QG30-KI series brings together inclinometers in nine variants with a plastic housing of 30 × 15 × 30 mm. The typical accuracy is 0.3°, 0.6° or 0.9°, the latter for a range of –45° to +45°. The connection is made with a 2 m PVC cable, a PUR cable, other cable lengths or an M8 connector, and the certifications are CE, UL and cTUVus. The sensors exist in versions with 1 or 2 axes, and analogue outputs, such as 0–20 mA, 0–5 V, 1–9 V or 0–10 V, can be supplied on request.
For encoders, the range covers the QR30, QR30N and QR20EMN series, with various outputs and a resolution of 10 or 12 bits. The incremental versions give A and B pulses, between 32 and 1024 per revolution, and QR40 has a magnet integrated in a D-shaped shaft, with a zero function. Typical applications are lifting and handling equipment, agricultural vehicles, construction machinery, production machines and installations in renewable energy and the marine sector.
What do we supply from the DIS Sensors range?
| Product | Description |
|---|---|
| QG30-KI inclinometers | Nine variants, from QG30-KI-010E to QG30-KI-090E, with a typical accuracy of 0.3°, 0.6° or 0.9°. The plastic housing is 30 × 15 × 30 mm, and the connection is made with a 2 m PVC or PUR cable, other lengths or M8. |
| Tilt switches | The same construction family as the inclinometers, with an NPN or PNP output as configured. There are also safety variants, for applications where a fault must be detected. |
| Acceleration sensors | A family with acceleration and acceleration-switching variants, including safety versions. They measure acceleration on 1, 2 or 3 axes, with MEMS technology, for active vibration damping, transport monitoring and preventive maintenance. |
| Rotary encoders QR30, QR40 | Absolute encoders with a resolution of 10 or 12 bits and incremental variants with 32–1024 pulses per revolution. QR40 has a magnet in a D-shaped shaft, with a zero function at commissioning. |
Why DIS Sensors?
- QG30-KI inclinometers in nine variants — the accuracy of 0.3°, 0.6° or 0.9° is chosen according to the application requirement
- 30 × 15 × 30 mm housing with cable or M8 connector — mounted in the tight spaces of a machine
- Safety variants for inclinometers, tilt switches and accelerometers — for functions where a fault has consequences
- QR30, QR40 and QR20EMN encoders — shaft and resolution matched to the angle measured
- Development, firmware and cable assembly in the same company — solutions tailored to the machine requirement, not just off-the-shelf parts
Which DIS Sensors codes and series are requested most often?
| Code | Description |
|---|---|
| QG30-KI-010E-AI-K | Inclinometer, typical accuracy 0.3° |
| QG30-KI-010E-AV-K | Inclinometer, typical accuracy 0.3° |
| QG30-KI-010E-AV-K-5V | Inclinometer, typical accuracy 0.3° |
| QG30-KI-030E-AI-K | Inclinometer, typical accuracy 0.6° |
| QG30-KI-030E-AV-K | Inclinometer, typical accuracy 0.6° |
| QG30-KI-030E-AV-K-5V | Inclinometer, typical accuracy 0.6° |
| QG30-KI-090E-AI-K | Inclinometer, typical accuracy 0.9°, range –45° to +45° |
| QG30-KI-090E-AV-K | Inclinometer, typical accuracy 0.9°, range –45° to +45° |
| QR30 | Rotary encoder, resolution of 10 or 12 bits |
| QR20EMN | Rotary encoder, resolution of 10 or 12 bits |
| QR40 | Rotary encoder with magnet in a D-shaped shaft |
Where is DIS Sensors equipment used?
- Lifting and handling equipment — tilt of arms and platforms
- Agricultural vehicles — levelling and monitoring the position of implements
- Construction machinery — angle of the boom and the bucket
- Renewable energy and the marine sector — measuring angles on moving structures
- Production machines — angular position on axes and flaps
How do we supply DIS Sensors in Romania?
We can quote sensors from DIS Sensors for measuring tilt, acceleration and angle: QG30-KI inclinometers, tilt switches and QR encoders. For a correct quotation, send the full code from the sensor, the accuracy or the range needed, the number of axes, the output type and the length or type of the connector. Items are supplied to order, usually in 1–4 weeks; for special or safety variants the lead time can be longer and is confirmed in the quotation.
For safety variants and special analogue outputs we check the exact availability before the final quotation.
Frequently asked questions about DIS Sensors
What does DIS Sensors make?
DIS Sensors, from Soest, Netherlands, makes inclinometers, tilt switches, acceleration sensors and absolute rotary encoders. The housings, the firmware and the cable assemblies are made in the same company, and part of the sensor range also has safety variants.
What is the difference between QG30-KI-010E, 030E and 090E?
The 010E variants have a typical accuracy of 0.3°, the 030E of 0.6°, and the 090E of 0.9°, over a range of –45° to +45°. We check the full meaning of the code on the datasheet of the model. Send the application and the signal required, and we confirm the suitable variant.
How long does it take to bring sensors from DIS Sensors to Romania?
A DIS Sensors inclinometer or encoder is supplied to order in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Safety variants and those with special outputs may need a longer lead time.
Can I replace an inclinometer with a QG30-KI?
Replacement depends on the dimensions (30 × 15 × 30 mm for QG30-KI), the output, the measuring range and the connection (cable or M8 connector). Send the code from the current sensor, the wiring diagram and a photo of the nameplate, and we check whether a QG30-KI model fits.
What information do you need for a QR30 or QR40 encoder?
For a QR encoder, send the type (absolute or incremental), the resolution wanted, between 10 and 12 bits or between 32 and 1024 pulses per revolution, the shaft shape, the electrical output and the fixing method. A photograph of the existing encoder helps identify the series.
How do I request a DIS Sensors quotation?
Send the DIS Sensors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: DIS Sensors bv (manufacturer documentation)

