Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Edinburgh Sensors supplier in Romania

For Edinburgh Sensors we quote Gascard NG infrared sensors, Guardian NG and Guardian NG DC gas monitors, Chillcard NG refrigerant sensors and the Boxed Gascard unit; we need the measured gas, the range and the power supply.

Request a quote

Who is Edinburgh Sensors and what does it make?

Edinburgh Sensors makes infrared gas sensors and monitors for continuous measurement of carbon dioxide, methane, carbon monoxide and refrigerants. The range is divided into components that you integrate into your equipment, Gascard NG and Chillcard NG, and complete monitors, Guardian NG and Guardian NG DC. The Boxed Gascard unit is used for testing and prototypes with the Gascard NG family.

Gascard NG has barometric correction for pressures between 800 and 1150 mbar and temperature compensation. The CO2 ranges start from 0–2000 ppm and go up to 100 %, for methane from 0–5 % to 100 %, and for CO from 0–10 % to 100 %. Accuracy is ±2 % of range, the T90 response time is 10 seconds, and the output is current, 4–20 mA or 0–20 mA, with RS232 for control and logging. A device is configured for a single gas.

Guardian NG is the complete monitor: it continuously measures CO2, CH4 or CO, displays the values and their history in a graph and controls external equipment through two alarm relays and a fault relay. The housing is IP54, and the supply is 90–260 V AC. CO2 measurement with the brand's sensors and monitors serves biogas, landfills, horticulture in controlled environments, controlled atmosphere storage, modified atmosphere packaging, ventilation and indoor air quality.

What do we supply from the Edinburgh Sensors range?

ProductDescription
Gascard NGInfrared sensor for integration into gas detection systems. It measures CO2, CH4 or CO, with accuracy of ±2 % of range, T90 of 10 seconds, a 7–30 V DC supply, current output and RS232, with a network communication option.
Guardian NG and Guardian NG DCInfrared monitors for CO2, CH4 and CO, with on-screen menus, a graph of the value history, a 4–20 mA or 0–20 mA analogue output and three output relays. The housing is IP54, and the T90 response time from the sample inlet is under 30 seconds.
Chillcard NGInfrared sensor for refrigerants, for example R125 and R134a, built with a micromachined silicon infrared source. Versions for CO2 and CO are also available, with current output, and a version with voltage output.
Boxed GascardBench unit for prototypes, built around the Gascard NG family, for CO2. It is used when you want to test the sensor and the gas before fitting it into the final equipment.

Why Edinburgh Sensors?

  • Gascard NG and Chillcard NG components for integration — the sensor goes straight into the equipment being designed, with a 4–20 mA or 0–20 mA output
  • Complete monitor Guardian NG with two alarm relays and a fault relay — the installation receives the control signals without extra modules
  • Ranges from 0–2000 ppm to 100 % for CO2 — the same sensor type covers everything from indoor air to biogas
  • Barometric correction between 800 and 1150 mbar and temperature compensation — the reading stays stable with pressure variations
  • Boxed Gascard unit for testing — the configuration is checked on the bench before integration into the equipment

Which Edinburgh Sensors codes and series are requested most often?

CodeDescription
Gascard NGInfrared sensor for CO2, CH4 or CO, with 4–20 mA or 0–20 mA output
Boxed GascardBench unit for testing with the Gascard NG family, for CO2
Guardian NGInfrared gas monitor, two alarm relays and a fault relay
Guardian NG DCVersion of the Guardian NG monitor
Chillcard NGInfrared sensor for refrigerants, with CO2 and CO versions

Where is Edinburgh Sensors equipment used?

  • Biogas and landfills — measuring CO2 and methane in the process
  • Horticulture in controlled environments — monitoring CO2 in greenhouses and growing rooms
  • Controlled atmosphere storage and modified atmosphere packaging — control of the gas composition
  • Refrigeration and HVAC installations — detection of refrigerants and CO2
  • Gasification and mines — continuous monitoring of CO2, CH4 and CO

How do we supply Edinburgh Sensors in Romania?

We can quote Gascard NG and Chillcard NG infrared sensors, Guardian NG monitors and the Boxed Gascard unit, in the configuration requested for a single gas. For an accurate quotation we need the gas to be measured, the range you want, the output type, the supply voltage and, for monitors, the number of relays needed. If you are replacing an existing sensor, a photo of the label helps a lot. We supply to order, usually in 1–4 weeks, and the exact date is confirmed in the quotation.

The gas and the range are fixed at order, so we quote only once we know exactly what you are measuring and under what pressure and humidity conditions.

Frequently asked questions about Edinburgh Sensors

What are Gascard NG, Chillcard NG, Guardian NG and Boxed Gascard at Edinburgh Sensors?

Edinburgh Sensors makes infrared gas sensors and monitors: Gascard NG for CO2, methane and CO, Chillcard NG for refrigerants and Guardian NG as a complete monitor with alarm relays. The Boxed Gascard unit is for testing. The company is based in Livingston, and the devices are configured for a single gas.

How do I choose the measuring range for a Gascard NG?

The range depends on the gas and on the real concentration in the process. For CO2 there are ranges from 0–2000 ppm up to 0–100 %, for methane from 0–5 % up to 0–100 %, and for CO from 0–10 %. Send the gas, the expected concentration and the working pressure, and we identify the suitable version.

Do you supply Guardian NG in Romania, and how fast?

Yes, Guardian NG monitors are supplied to order, usually in 1–4 weeks. A device can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the configuration, the lead time may be longer; the exact date appears in the quotation.

Can I replace an existing CO2 sensor with a Gascard NG?

Yes, if the supply, the output and the gas match. Gascard NG works at 24 V DC with a range of 7–30 V and has current output and RS232. Send the label of the current sensor and the connection diagram, and we confirm in the quotation whether the version fits.

What data do you need for a quotation for a Guardian NG or Guardian NG DC monitor?

For Guardian NG we need to know the gas, that is CO2, CH4 or CO, the range in percent or ppm, the available supply voltage and which relays or analogue output you use. Add the mounting location, because the monitor has an IP54 housing, and, if you have it, a photo of an existing device. Guardian NG DC is a version of the Guardian NG monitor.

How do I request a Edinburgh Sensors quotation?

Send the Edinburgh Sensors code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Edinburgh Sensors (manufacturer documentation)