ENOTEC supplier in Romania
Process and combustion gas analysers
Founded in 1980 · Headquarters: Marienheide, Germany
Who is ENOTEC and what does it make?
ENOTEC is a German manufacturer of process gas analysers, headquartered in Marienheide, in North Rhine-Westphalia, and active since 1980. The company makes analysers mounted directly on the duct (in-situ), gas sampling probes and system solutions that integrate the analyser with sample conditioning. For the Romanian market we can quote both individual analysers and complete gas extraction and analysis systems, depending on the customer's application.
The core technology is the zirconia oxygen sensor of the OXITEC 5000 series, with a GASEX variant for areas with an explosive gas atmosphere. The COMTEC 6000 series adds carbon monoxide measurement (O2/CO), with GASEX and STAUBEX variants for areas with combustible dust. SILOTEC 8000 monitors the atmosphere in silos, and AQUATEC 1000 measures the water vapour content of the gas.
In Romania, ENOTEC makes sense for operators of power plants, cement plants, refineries and incineration installations that need analysers for ATEX areas, mounted directly on the exhaust stack or on the process gas duct.
What do we supply from the ENOTEC range?
| Product | Description |
|---|---|
| OXITEC 5000 Series Oxygen Analysers | Oxygen analyser with zirconia sensor, mounted directly on the gas duct, without a sampling system. The GASEX variant is certified for mounting in areas with an explosive gas atmosphere. Typical application: adjustment of excess air at burners in power plants and cement plants, to optimise combustion. |
| COMTEC 6000 Series Combined O2/CO Analysers | Analyser that simultaneously measures residual oxygen and carbon monoxide in flue gases, for fine adjustment of the air-fuel ratio. The GASEX and STAUBEX variants allow mounting in areas with gas or combustible dust respectively, according to the ATEX requirements of the installation. |
| SILOTEC 8000 Silo Analyser and Sampling Probes | SILOTEC 8000 is the ENOTEC system for silo monitoring. The range also includes gas sample probes (Sondensystem) and complete system solutions, with sample conditioning before the analyser. |
Why ENOTEC?
- Zirconia oxygen sensor mounted in-situ on the duct, without a sampling line.
- GASEX and STAUBEX variants as per the manufacturer's documentation, for mounting in areas with combustible gases or dust.
- Range from the O2 analyser (OXITEC) to combined O2/CO measurement (COMTEC).
- Dedicated system for silo monitoring (SILOTEC 8000).
Which ENOTEC codes and series are requested most often?
| Code | Description |
|---|---|
| OXITEC 5000 | oxygen analyser with zirconia sensor, in-situ mounting |
| OXITEC 5000 GASEX | OXITEC 5000 variant for gas areas, as per the manufacturer's documentation |
| COMTEC 6000 | combined O2/CO analyser for combustion optimisation |
| COMTEC 6000 GASEX | COMTEC 6000 variant for gas areas |
| COMTEC 6000 STAUBEX | COMTEC 6000 variant for dust areas |
| SILOTEC 8000 | silo monitoring system |
| ENSITU 7000 | gas analyser mounted directly on the process duct |
| AQUATEC 1000 | analyser for water vapour content in gas |
| Sondensystem (sampling probe) | gas sample extraction and conditioning system |
| Systemtechnik (system solution) | complete integration of analyser, probe and sample conditioning |
Where is ENOTEC equipment used?
- Energy - oxygen monitoring at boilers in power plants
- Cement plants - flue gas analysis at rotary kilns
- Waste incineration - continuous emissions control
- Refineries and petrochemicals - gas analysis in ATEX areas
- Silos - monitoring the atmosphere inside the silo
How do we supply ENOTEC in Romania?
For ENOTEC we work from the manufacturer's technical documentation; lead time and availability are specified in the quotation. We bring in to order both individual OXITEC and COMTEC units and complete systems with sampling probe — typically within 1–4 weeks of order confirmation, depending on configuration and on availability at the manufacturer. For a quotation we need the gas measured, the temperature and pressure at the mounting point and whether the area requires ATEX certification. Availability is checked series by series — valid for the whole ENOTEC range.
The electronic compatibility of ENOTEC analysers with third-party SCADA systems is checked case by case, and warranty service remains the manufacturer's responsibility.
Frequently asked questions about ENOTEC
What products does ENOTEC make?
ENOTEC is a German manufacturer of process and combustion gas analysers, with a zirconia-based oxygen sensor mounted directly on the duct. The range includes individual O2 analysers (OXITEC), combined O2/CO analysers (COMTEC), silo units (SILOTEC) and sampling probes.
What is the difference between OXITEC 5000 and COMTEC 6000?
OXITEC 5000 measures only the residual oxygen in flue gases, while COMTEC 6000 also adds carbon monoxide, for finer control of the air-fuel ratio. The choice depends on how strictly combustion has to be optimised and on emissions reporting requirements.
Can you supply ENOTEC analysers in Romania and within what lead time?
Yes, we bring in ENOTEC units to order, typically within 1–4 weeks of confirmation, depending on configuration and on availability at the manufacturer. This range is supplied to order, so the actual lead time is confirmed after the order is checked.
What measuring principle does the ENOTEC oxygen analyser use?
ENOTEC uses a zirconia oxygen sensor mounted directly on the duct, without a separate sampling line.
What information do you need for a quotation on an ENOTEC analyser?
Please specify the gas to be measured (O2, CO or combined), the temperature and pressure of the gas at the mounting point, whether the area is ATEX classified and the type of installation (duct, stack, silo). With this data we check the suitable range and send a realistic lead time.
How do I request a ENOTEC quotation?
Send the ENOTEC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ENOTEC GmbH (manufacturer documentation)

