Furness Controls supplier in Romania
For Furness Controls we quote FCO730, FCO750 and FCO780 leak testers, FCO432 and FCO452 differential pressure transmitters, FCO96 and FCO65 flow elements, FRS4 and FCO99 calibrators; we need the code and the pressure range.
Who is Furness Controls and what does it make?
Furness Controls builds equipment for measuring very low pressures, for air flow measurement and for leak testing. The main production is at Bexhill, in England, and the address in Germany is at Willich. The range covers leak testers, differential pressure transmitters, flow elements, flowmeters and calibrators.
For leak testing, the FCO780 and FCO790 are touchscreen differential pressure instruments intended for production lines, the FCO794 measures continuously and suits large housings and gas appliances, the FCO750 is automatic, and the FCO730 is the entry version. The FCO220 is a digital leak calibrator that also works as a digital flowmeter. The instruments store hundreds of test parameters, run tests in series and print a label with the result.
The FCO432, FCO418 for panel mounting and FCO452 in an industrial version transmitters measure differential, gauge and absolute pressure on the capacitive principle, from ±50 Pa, with an optional OLED display. The flow elements include the FCO96 laminar element and the FCO65, FCO66 and FCO68 Pitot tubes. For calibration there are the FRS4, an ultra-low pressure standard, the FCO560 and the FCO99 calibrated leak set. The transmitters measure in vapours, gases and powders, hydrostatic level in tanks, mass flow through pipes and filter clogging, and at Bexhill each instrument goes through a 24-hour stress test; a calibration laboratory also operates there. For a quotation, send the full code.
What do we supply from the Furness Controls range?
| Product | Description |
|---|---|
| Leak testers | The FCO730 is the entry instrument, the FCO750 is automatic, the FCO780 and FCO790 have a touchscreen for production lines, and the FCO794 measures continuously, for large housings. The FCO220 is a digital leak calibrator and flowmeter. |
| Differential pressure transmitters | The FCO432 is the high-accuracy version, the FCO418 mounts in a panel, and the FCO452 is the industrial version for small differential pressures. They use the capacitive principle and have an optional OLED display. |
| Flow elements | The FCO96 is a laminar flow element with low pressure loss, the FCO65 and FCO66 are static Pitot tubes, and the FCO68 is a multi-hole Pitot tube for measuring the mean value. |
| Calibrators and standards | The FRS4 is a standard for calibration at ultra-low pressures, the FCO560 is a fine pressure and flow calibrator, and the FCO99 is a set of calibrated leaks for pressure-decay testers. |
Why Furness Controls?
- Capacitive transmitters from ±50 Pa — measure very small differential pressures
- Touchscreen leak testers — serial tests on production lines, with hundreds of stored parameters
- Label printed with the test result — the tested part is easy to identify
- Laminar and Pitot flow elements — for air and gas flow with low pressure loss
- FRS4 standard and FCO99 calibrated leaks — periodic checking of your own instruments
Which Furness Controls codes and series are requested most often?
| Code | Description |
|---|---|
| FCO730 | Differential pressure leak tester, entry version |
| FCO750 | Automatic leak tester |
| FCO780 | Leak tester with touchscreen |
| FCO790 | Leak tester with touchscreen |
| FCO794 | Instrument with continuous measurement, for large housings and gas appliances |
| FCO220 | Digital leak calibrator and digital flowmeter |
| FCO432 | High-accuracy differential pressure transmitter |
| FCO418 | Transmitter for panel mounting |
| FCO452 | Industrial transmitter for small differential pressures |
| FCO96 | Laminar flow element |
| FCO65 | Static Pitot tube |
| FCO68 | Multi-hole Pitot tube |
| FRS4 | Standard for calibration at ultra-low pressures |
| FCO99 | Set of calibrated leaks |
Where is Furness Controls equipment used?
- Automotive — leak testing of components at the end of the line
- Air conditioning and clean rooms — differential pressure and air flow
- Gas appliances and household appliances — leak testers for large housings
- Food and beverages — leak testing instruments
- Utilities and energy — measuring flow and hydrostatic level in tanks
How do we supply Furness Controls in Romania?
We can quote the FCO730, FCO750, FCO780, FCO790 and FCO794 leak testers, the FCO432, FCO418 and FCO452 transmitters, flow elements and calibrators. For an exact quotation we need the full code from the instrument or the nameplate, the pressure range, the unit of measure wanted, the output required and, for testers, the volume and type of the parts tested. For replacements, send a photo of the nameplate. Items are supplied to order, usually in 1–4 weeks; depending on the specification the lead time may be longer, and the date appears in the quotation.
Pressure and flow ranges are chosen individually, so we prepare the quotation once we receive the nominal values required.
Frequently asked questions about Furness Controls
What does Furness Controls make?
Furness Controls makes leak testers, differential pressure transmitters for very low pressures, flow elements, pressure-drop flowmeters and calibrators. The main production is at Bexhill, in England, and in Germany the address is at Willich.
How do I choose between the FCO730, FCO750 and FCO780?
The FCO730 is the entry version, the FCO750 is automatic, and the FCO780 and FCO790 have a touchscreen. The FCO794 is chosen for large housings. Send the volume of the part, the test pressure and the number of parts per hour.
Do you supply Furness Controls equipment in Romania?
Furness Controls equipment is supplied to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. Instruments prepared for production lines may need more, and the final lead time is set in the quotation.
Can I replace an older FCO transmitter?
Yes, once the code, the pressure range, the output and the mounting type have been checked. The equivalence results from comparing these data. Send the code from the nameplate, the range and the connection type, and we propose the suitable version in the quotation.
What data do you need for a leak tester?
The volume and type of the part, the test pressure, the permitted leak, the pace of the production line and whether the instrument is fixed-mounted or stays on a bench. For a transmitter add the pressure range and the output wanted. With these data we choose the suitable FCO series.
How do I request a Furness Controls quotation?
Send the Furness Controls code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Furness Controls GmbH (manufacturer documentation)

