Giacomello supplier in Romania
For Giacomello we quote TL, LV and LUN series visual level indicators, Rapid Level RL/G1 and RL/G2 level switches, IEG immersion level indicators, plugs and SCF and FLU/P flow indicators.
Founded in 1985 · Headquarters: Rho (Milan), Italy
Who is Giacomello and what does it make?
F.lli Giacomello is an Italian manufacturer of level indicators, based in Rho, near Milan, active since 1985. The range covers visual level indicators, immersion level indicators, level switches of the Rapid Level series, flow indicators, plugs and small level indicators. They are used where the level of a liquid has to be read directly or signalled to a control system. The flow indicators include the SCF series, the FLU/P flow meters and the FLU/P flow switches, and the Rapid Level series also includes RL/AT, RL/M12 and RL/V-S.
The visual indicators are distinguished by series and by connection: TL, LV, LV/T, LV/E1, LV/E2 and LV/M with M10 or M12 thread, while LV/M also exists with a 1/2" GAS thread, plus LUN, LMU and LU-S with a 3/8" or 1/2" thread. The immersion level indicators are grouped in the IEG codes, in brass, stainless steel and PVC versions, for example IEG-TC1, IEG-INOX-TC1 or IEG-PVC-1/2.
The Rapid Level switches, for example RL/G1, RL/G2, RL/G1-MAXI and RL/PN, are mounted, depending on the series, with a Ø 55 flange or with a GAS or NPT thread. The RL/G1 model has an ON/OFF output with SPST or SPDT contact and works from -20 °C to +80 °C or +120 °C. They are used for dirty liquids, water, oils and coolants, tolerating ferrous particles. For a quotation the series, connection and material matter.
What do we supply from the Giacomello range?
| Product | Description |
|---|---|
| Visual level indicators | The TL, TL/E, LV, LV/T, LV/TS, LV/E1, LV/E2, LV/M, LUN, LMU and LU-S series, with M10, M12, 1/2" GAS or 3/8" connections. The level is read directly on the device. |
| Rapid Level level switches | The RL/G1, RL/G2, RL/G1-L, RL/G1-MAXI, RL/PN, RL/V-S and MG series, with Ø 55 flange or GAS or NPT thread. RL/G1 works from -20 to +80 °C or +120 °C, with ON/OFF output and SPST or SPDT contact. |
| IEG immersion level indicators | The IEG series includes brass, stainless steel (IEG-INOX) and PVC versions, for example IEG-TC1, IEG-N1F, IEG-MP and IEG-PVC-MP. They are inserted into the liquid to show the level in tanks. |
| Flow indicators | The family includes the SCF series, FLU/P flow meters and FLU/P flow switches, used to see or signal the flow of liquid. The choice of series depends on the liquid, the connection in the installation and the indication mode wanted. |
Why Giacomello?
- Several series of visual indicators, with M10, M12 or 3/8" thread — the item is chosen according to the existing mounting hole
- Immersion level indicators in brass, stainless steel and PVC — the material is matched to the liquid in the tank
- Rapid Level switches with ON/OFF output and SPST or SPDT contact — the level signal connects directly to the control
- Tolerate dirty liquids and ferrous particles — they can be fitted in oil and coolant circuits
- Flow indicators in the same offer — level and flow monitoring for a tank are quoted together
Which Giacomello codes and series are requested most often?
| Code | Description |
|---|---|
| LV/M | Visual level indicator, M10, M12 or 1/2" GAS thread |
| LV/E1 | Visual level indicator with electrical element |
| LUN | Visual level indicator, 3/8" thread |
| RL/G1 | Rapid Level level switch |
| RL/G2 | Rapid Level level switch |
| RL/G1-MAXI | Rapid Level switch, MAXI version |
| RL/PN | Rapid Level switch with GAS thread |
| IEG-TC1 | Brass immersion level indicator |
| IEG-INOX-TC1 | Stainless steel immersion level indicator |
| IEG-PVC-1/2 | PVC immersion level indicator |
| SCF | Series of flow indicators |
Where is Giacomello equipment used?
- Oil and coolant circuits — Rapid Level switches for dirty liquids
- Water circuits — level signalling with Rapid Level switches
- Liquid tanks — visual level indicators for direct reading
- Fluid installations — flow indicators and immersion level indicators
How do we supply Giacomello in Romania?
We can quote Giacomello products from the series of visual level indicators, IEG immersion level indicators, Rapid Level switches and flow indicators, including replacement items for existing tanks. For a correct quotation send the full code from the part (for example LV/M or RL/G1), the connection and thread, the material, the contact type and the liquid in the tank; for switches add the working temperature. If needed, a photo helps with identification. We supply Giacomello products to order, usually in 1–4 weeks, and the exact lead time is stated in the quotation.
The material and the permitted pressure are confirmed in the quotation for each series, because not all series state these data in the same way.
Frequently asked questions about Giacomello
What are the LV/M, Rapid Level RL/G1 and IEG-TC1 series at Giacomello?
The LV/M series is the visual level indicators, RL/G1 the Rapid Level level switches, and IEG-TC1 the brass immersion level indicator. F.lli Giacomello has made level indicators since 1985: visual indicators, immersion level indicators, Rapid Level switches, flow indicators, plugs and small level indicators. The company is based in Rho, near Milan.
How do I choose between a visual indicator and a Rapid Level switch?
The visual indicator shows the level directly on the tank, while the Rapid Level switch, for example RL/G1, gives an ON/OFF signal with SPST or SPDT contact to the control. Send the liquid, the temperature and the type of signal required, and we check the suitable series.
Do you supply Giacomello in Romania and how fast?
Yes. Indicators and switches are supplied to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. We confirm the exact date by code in the quotation.
Can I replace an old level indicator with a Giacomello one?
It is possible if the thread, the distance between holes and the material are compatible. The LV and TL series are mounted on M10 or M12 thread, and LUN and LU-S on 3/8" or 1/2". Send the measurements and a photo of the existing indicator, and we check the suitable series.
What information do you need for an RL/G1 switch?
For an RL/G1 switch send the connection (Ø 55 flange, GAS or NPT), the contact type (SPST or SPDT), the working temperature (up to +80 or +120 °C), the liquid and the length or mounting position. If you have the full code from the current part, we use it directly.
How do I request a Giacomello quotation?
Send the Giacomello code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: F.lli Giacomello S.r.l. (manufacturer documentation)

