Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Endevco supplier in Romania

Accelerometers, pressure sensors and conditioners for shock and vibration

Founded in 1947

Request a quote

Who is Endevco and what does it make?

Endevco is an American manufacturer of dynamic instrumentation, active since 1947, specialising in vibration, shock and pressure sensors for testing and measurement. Engineering and manufacturing are at Irvine, California, and the MEMS sensing elements are designed and produced at a centre in Silicon Valley. The offer includes accelerometers, angular rate sensors, miniature pressure sensors, high-intensity noise microphones, signal conditioners, amplifiers and in-house cables.

The sensing element technology decides the application. Piezoelectric accelerometers in charge mode work from cryogenic temperatures to very high values and in radiation environments, but need an external charge amplifier. The IEPE variants have integrated electronics and eliminate the intermediate amplifier and the special cable. The piezoresistive ones measure impacts and shocks, for example in car crash tests, and the variable-capacitance ones respond down to direct current and are used for slow motion and tilt. Piezoresistive pressure sensors, with a MEMS strain-gauge bridge, measure dynamic and static pressure in processes, in blast pressure tests, in hydraulics or in airbag testing.

Endevco sensors are found in mechanical testing laboratories, on test benches for engines or turbines and in vibration monitoring at power plants. For a replacement, the full suffix of the model and the sensitivity shown on the calibration certificate matter.

What do we supply from the Endevco range?

ProductDescription
Piezoelectric accelerometers (22xx series)Charge-mode models, such as the 2220E (3 pC/g, from −67 °F to +500 °F, isolated), 2221F (10 pC/g) and 2222C-R (1.4 pC/g, from −100 °F to +350 °F). An external charge amplifier is used for measurement.
Piezoresistive accelerometers and angular rate sensorsMEMS families for impact and shock, including the 7262A, a piezoresistive accelerometer with amplified output, and the 7330, a triaxial angular rate sensor that directly measures rotation in degrees per second.
Piezoresistive pressure sensors (8507C, 8510B)Miniature gauge pressure transducers. The 8507C has a diameter of 0.092 in and ranges from 1 to 15 psig in the available variants, and the 8510B has a 0.152 in face and a 10-32 UNF thread.
Signal conditioners and amplifiersElectronics for piezoelectric and piezoresistive sensors, from simple battery-powered units to laboratory instruments. Examples: the 2680B charge amplifier for aircraft and the 6634D differential conditioner.

Why Endevco?

  • Four sensor technologies in the same family — piezoelectric in charge mode, IEPE, piezoresistive and variable-capacitance; each answers a different type of measurement, from continuous vibration to shock
  • Piezoelectric accelerometers for extreme conditions — the 22xx series covers, for example, the range from −55 to +260 °C for the 2220E, and the technology also withstands radiation environments
  • Miniature pressure sensors — the 8507C family has a diameter of 0.092 in (approx. 2.3 mm), useful where a classic transducer does not fit
  • In-house conditioning electronics — charge amplifiers for aircraft (2680B) and differential piezoelectric conditioners (6634D), compatible with Endevco sensors
  • Cables and connectors designed in-house — low-noise, high-temperature and multiconductor variants, so the measurement chain stays coherent

Which Endevco codes and series are requested most often?

CodeDescription
2220EPiezoelectric accelerometer, 3 pC/g, isolated
2221FPiezoelectric accelerometer, 10 pC/g, isolated
2222C-RPiezoelectric accelerometer, 1.4 pC/g
2224CPiezoelectric accelerometer, 12 pC/g, non-isolated
2226CPiezoelectric accelerometer, 2.8 pC/g, non-isolated
7262APiezoresistive accelerometer with amplified output
7330Triaxial angular rate sensor
8507C-1Gauge pressure sensor, 1 psig, diameter 0.092 in
8507C-15Gauge pressure sensor, 15 psig, diameter 0.092 in
8510B-1Gauge pressure sensor, 1 psig, 0.152 in face, 10-32 UNF thread
2680BM1Piezoelectric charge amplifier for aircraft
6634DDifferential conditioner for piezoelectric signal

Where is Endevco equipment used?

  • Automotive industry — impact and crash tests, measurements on the powertrain and chassis
  • Aerospace — in-flight and ground tests for aircraft and space vehicles
  • Power generation — maintenance work and tests on turbines
  • Test laboratories — general measurements of vibration, shock and dynamic pressure
  • Blast pressure tests — wideband dynamic pressure sensors

How do we supply Endevco in Romania?

For Endevco we prepare quotations by model code: accelerometers, pressure sensors, conditioners and cables. Supplied to order, typically in 1–4 weeks, and depending on the model and specification the lead time may be longer, especially for variants with a calibration certificate. For an accurate quotation it helps to have the full code from the sensor body, including the suffix, the output type (charge, IEPE or voltage), the measuring range, the mounting type or thread and the cable length. If the sensor replaces an older one, also send us a photo of the label or of the certificate.

The availability of discontinued models, or of ones remaining only from stock, is checked on the basis of the full sensor code.

Frequently asked questions about Endevco

What products does Endevco make?

Endevco, founded in 1947, makes vibration, shock and pressure sensors: piezoelectric, IEPE, piezoresistive and variable-capacitance accelerometers, angular rate sensors, miniature pressure transducers, high-intensity noise microphones, plus amplifiers, conditioners and cables. The range is oriented towards testing and measurement.

How do I choose between a piezoelectric, an IEPE and a piezoresistive accelerometer?

The piezoelectric one in charge mode is chosen for extreme temperatures and radiation environments, with an external amplifier. IEPE integrates the electronics and simplifies cabling. The piezoresistive one tracks strong shocks and has a response down to direct current. Tell us the range in g, the frequency band and the working temperature, to help guide the choice.

Can Endevco sensors be supplied in Romania and within what time?

Yes, to order. The lead time is typically 1–4 weeks and is confirmed in the quotation, and for special variants or ones with a calibration certificate it may be longer. Endevco sensors can ship in 24–72 h when the item is in stock, locally or at the supplier.

Can I replace an old Endevco sensor with a current model?

Some models have been discontinued, and others have successors. Equivalences are confirmed after checking: we need the full code, the sensitivity (pC/g or mV/g), the range, the connector and the mounting type, on the basis of which we confirm whether a compatible model exists.

What data do you need for a quotation on an 8507C or 8510B pressure sensor?

The full code with the range suffix (for example 8507C-5), the pressure type (gauge or absolute), the mounting type or thread, the cable length and, if the sensor already exists on the installation, a photo of the label are needed. With this data we prepare a firm quotation for the exact model.

How do I request a Endevco quotation?

Send the Endevco code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Endevco (manufacturer documentation)