Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

CS Instruments supplier in Romania

For CS Instruments we quote VA 526 and VC 600 flow sensors, FA 500, FA 510 and FA 550 dew point sensors, the OIL CHECK 500 analyser and the LeakCam 600 acoustic camera; we need the gas, the pipe and the output signal.

Request a quote

Who is CS Instruments and what does it make?

CS INSTRUMENTS GmbH & Co KG makes measuring instruments for compressed air and gas installations. The offices are in VS-Tannheim and Harrislee, Germany. The range covers dew point, flow and consumption, compressed air quality, leak detection, pressure sensors, data loggers, and power and humidity measuring instruments.

For flow measurement, VA 526 is a compact in-line sensor that combines flow, consumption and temperature, with optional pressure and humidity; the standard output is 4…20 mA, with Modbus RTU, Ethernet, M-Bus and IO-Link options, plus Bluetooth for parameterisation. VC 600 is an ultrasonic flow meter that clamps onto the outside of the pipe, without opening it, for compressed air and nitrogen, on pipes with an outside diameter of 25–90 mm.

For dew point, the FA 510 and FA 515 sensors measure residual moisture at refrigeration and adsorption dryers, FA 550 has a die-cast aluminium housing for harsh industrial environments, and FA 515 Ex has ATEX approval for zone 1. The portable DP 500 has a data logger. OIL CHECK 500 continuously measures oil vapours, and LeakCam 600 is an ultrasonic camera with 64 microphones for finding leaks.

As for interfaces, the sensors can be read over Bluetooth with a dedicated app, and VC 600 has inputs for pressure and temperature, to calculate the volumetric flow at standard conditions. The right choice starts from the gas, the working pressure and the type of installation, not only from the sensor code.

What do we supply from the CS Instruments range?

ProductDescription
Flow sensors VA 526 and VC 600VA 526 is a compact in-line sensor for flow, consumption and temperature in compressed air and gases. VC 600 is a transit-time ultrasonic flow meter, mounted on the outside of steel, stainless steel or aluminium pipe, with a totaliser and data logger.
FA dew point sensorsFA 500, FA 510, FA 515, FA 550 and FA 505 (OEM) measure residual moisture at air dryers. FA 510 and FA 515 have ranges from -20 to 50 °Ctd for refrigeration dryers and from -80 to 20 °Ctd for adsorption dryers, with Modbus RTU.
OIL CHECK 500Analyser of residual oil vapours in compressed air and gases, with photoionization detector, data logging and class indicator. It gives an indicative measurement according to ISO 8573-5:2025, and laboratory analysis remains necessary to demonstrate the oil class.
LeakCam 600Acoustic camera for locating compressed air and gas leaks, with 64 MEMS microphones, a 5-inch touchscreen and a 13 MP camera. The laser distance module helps estimate the leak flow, and reports are exported as PDF and CSV.

Why CS Instruments?

  • VC 600 flow meter that clamps onto the outside of the pipe — consumption is measured without shutting down the compressed air network
  • VA 526 with 4…20 mA, Modbus RTU, Ethernet, M-Bus or IO-Link — it integrates into the existing monitoring system
  • Dew point sensors for refrigeration and adsorption dryers, including FA 515 Ex with ATEX zone 1 — residual moisture monitoring in different installations
  • OIL CHECK 500 with PID detector — continuous tracking of oil vapours between laboratory analyses
  • LeakCam 600 with 64 microphones and adjustable frequency 2–130 kHz — leaks are found even in noisy halls

Which CS Instruments codes and series are requested most often?

CodeDescription
VA 526Compact in-line sensor for flow, consumption and temperature
VC 600Ultrasonic flow meter mounted on the outside of the pipe
CMM 500Compressor capacity measurement
FA 500Dew point sensor with display and alarm relay
FA 510Residual moisture sensor for dryers
FA 515Residual moisture sensor for dryers
FA 515 ExDew point sensor with ATEX zone 1
FA 550Dew point sensor in a die-cast aluminium housing
FA 505OEM dew point sensor for adsorption dryers
DP 500Portable dew point instrument with data logger
DS 52Display for dew point sensors
DS 400Stationary dryer monitoring
OIL CHECK 500Residual oil vapour analyser
LeakCam 600Acoustic camera for leak detection

Where is CS Instruments equipment used?

  • Compressed air stations — monitoring of consumption and flow at the consumers
  • Air dryers — dew point at refrigeration and adsorption dryers
  • Quality compressed air — oil vapour control according to ISO 8573
  • Explosion-risk areas — FA 515 Ex dew point sensor for zone 1
  • Production halls — finding compressed air and gas leaks with LeakCam 600

How do we supply CS Instruments in Romania?

We can quote VA 526 and VC 600 flow sensors, FA dew point sensors, the OIL CHECK 500 analyser and the LeakCam 600 camera, in the requested configuration. For a correct quotation we need the gas measured, the working pressure, the type and diameter of the pipe, the output signal you want and, for dew point, the dryer type. For VC 600 add the pipe wall thickness. The equipment is supplied to order; the usual lead time of 1–4 weeks grows when more communication options are requested.

The output version and the measuring options are selected when ordering, so we start the quotation from the data of your pipe and dryer.

Frequently asked questions about CS Instruments

What are FA 515 Ex, FA 550, DP 500 and LeakCam 600 from CS Instruments?

CS Instruments makes instruments for compressed air and gas installations: flow sensors, dew point sensors, oil vapour analysers, ultrasonic leak detectors, pressure sensors and data loggers. The offices are in VS-Tannheim and Harrislee, Germany. FA 515 Ex is a dew point sensor with ATEX zone 1, FA 550 one in a die-cast aluminium housing, DP 500 a portable dew point instrument with data logger, and LeakCam 600 an acoustic camera.

How do I choose between VA 526 and VC 600?

VA 526 is mounted in line and measures flow, consumption and temperature at the point of use. VC 600 clamps onto the outside of the pipe, without opening the pipe. Send the pipe diameter and wall thickness, the pressure and the gas, and we select the suitable version.

Do you supply CS Instruments products in Romania and how fast?

Yes, CS Instruments products are supplied to order, usually in 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. Additional communication options can extend the lead time.

How do I replace a dew point sensor on a dryer?

Choose the replacement by the type of dryer, refrigeration or adsorption, by the dew point range, by the required signal and by the process connection. Send the code of the old sensor, for example FA 510, and a photo of the installation, and we propose the suitable sensor.

What details do I send for a quotation on OIL CHECK 500?

Send the pressure and humidity of the air at the measuring point, whether there is aerosol separation upstream and the quality standard targeted. The instrument works with gas at no more than 40 % relative humidity and a dew point of no more than +10 °C, without condensate.

How do I request a CS Instruments quotation?

Send the CS Instruments code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: CS INSTRUMENTS GmbH & Co KG (manufacturer documentation)