Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Dataforth supplier in Romania

Signal conditioning modules for automation

Headquarters: Tucson, Arizona, USA

Request a quote

Who is Dataforth and what does it make?

Dataforth is an American manufacturer based in Tucson, Arizona, specialising in signal conditioning modules and data acquisition systems for industrial automation. Its products electrically isolate process signals — temperature, pressure, voltage, current — between the sensor and the control system, protecting the programmable controller from electrical noise and from surges induced on the wiring. The range covers modules mounted on DIN rail or backplane, complete data acquisition systems and 4-20mA loop transmitters, designed for direct integration into PLCs, SCADA or DCS systems already present in an installation.

What sets the Dataforth range apart is three-way transformer galvanic isolation, used in the SCM5B and DSCA series. Typical accuracy on the SCM5B reaches ±0.03%, useful where the conditioning error matters in the measurement loop. The 8B series reduces the physical size of the module for embedded or portable applications, and the DSCA and DSCT variants are available in ATEX versions according to the manufacturer's documentation, for installation in areas with explosion risk.

For installations in Romania, the Dataforth range makes sense where an integrator needs reliable galvanic isolation on an analogue signal — refineries, process stations, lines where electrical noise from drives or motors affects the measurements of an existing programmable controller.

What do we supply from the Dataforth range?

ProductDescription
SCM5B Series Signal Conditioning ModulesIndustrial modules with three-way transformer isolation, mounted on DIN rail or backplane. They cover 19 families and over 250 models, for temperature (thermocouple, RTD), voltage, current and frequency signals, with typical accuracy of ±0.03%. Galvanic isolation completely separates the field side from the control side, protecting the programmable controller from surges and noise induced on the wiring.
SCM7B and 8B Series Compact ModulesSCM7B is the compact DIN-rail variant, with 14 families and over 200 models, designed for data acquisition. The 8B series reduces the size even further — compact isolated signal conditioners, with 19 families and 123 modules, suited to integration into equipment where enclosure space is limited.
MAQ20 Data Acquisition SystemA modular data acquisition and control platform, with approvals stated in the manufacturer's documentation for hazardous locations. It is completed with input/output modules for analogue and digital signals and can operate distributed over a network, useful when data must be collected from several points of an installation and centralised in a single monitoring system.
DSCT and DSCP Loop TransmittersDSCT is a 2-wire loop-powered transmitter, in a variant for areas with explosion risk, for converting a sensor signal into a standard 4-20mA signal. DSCP is the user-programmable variant, configurable for various input types without additional hardware. Both complement the DIN-rail DSCA conditioning series, in a single coherent product family.

Why Dataforth?

  • Three-way transformer galvanic isolation in the SCM5B and DSCA series
  • ±0.03% accuracy on SCM5B modules, relevant for measurement loops where the conditioning error matters
  • DSCA and DSCT variants according to the manufacturer's documentation, mountable in areas with explosion risk without additional conditioning
  • MAQ20 system with the approvals listed for hazardous locations, suited to petrochemicals and refineries
  • A range from the individual module to the data acquisition system, without changing supplier during the project

Which Dataforth codes and series are requested most often?

CodeDescription
SCM5BIsolated signal conditioning module, three-way transformer, ±0.03% accuracy
SCM7BCompact DIN-rail module for data acquisition
8BCompact isolated signal conditioner, for embedded applications
DSCADIN conditioner with three-way transformer isolation
SCM9BSoftware-configurable module for distributed data acquisition
SCMDMiniature solid-state device for ON/OFF signals, 4kV isolation
MAQ20Modular data acquisition and control system, with approvals according to the manufacturer's documentation
5B isoLynx SLX200Data acquisition system based on 5B modules
8B isoLynx SLX300Data acquisition system based on 8B modules
DSCT2-wire loop-powered transmitter, in a variant for areas with explosion risk
DSCPUser-programmable transmitter for 4-20mA signal
PWRMIoT series for monitoring energy and electrical consumption
SCM5B37SCM5B module for thermocouple input
DSCA37DSCA module for thermocouple input, DIN mounting

Where is Dataforth equipment used?

  • Industrial automation — signal conditioning for 4-20mA, RTD and thermocouple control loops
  • Areas with explosion risk — DSCA and DSCT modules for hazardous environments
  • Embedded and portable systems — 8B series, compact isolated conditioners
  • Energy monitoring and IoT — PWRM series for tracking electrical consumption
  • Distributed data acquisition — SCM9B series, with RS-232/RS-485 conversion

How do we supply Dataforth in Romania?

We supply Dataforth signal conditioning modules and data acquisition systems to order, usually in 1–4 weeks depending on availability at the manufacturer. We confirm availability in the quotation, and the lead time for the requested code is stated in the same quotation; information about families, modules and certifications comes from the manufacturer's technical documentation. For an accurate quotation we need the exact module code (for example SCM5B37 or DSCA47), the input/output signal type and, where applicable, the ATEX or UL certification requirement of the installation.

Availability of a given SCM or DSCA code is checked at the time of the request and depends on the manufacturer's availability.

Frequently asked questions about Dataforth

What products does Dataforth make?

Dataforth makes signal conditioning modules and data acquisition systems for industrial automation, with three-way transformer galvanic isolation. The range includes the SCM5B, SCM7B, 8B and DSCA series, complete systems such as MAQ20 and DSCT and DSCP loop transmitters, all designed for integration into existing PLCs and SCADA systems.

How do I choose the right module from the Dataforth range?

The choice starts from the input signal type — thermocouple, RTD, voltage or current — and from the mounting requirement: DIN rail for SCM5B, SCM7B or DSCA, or reduced space for the 8B series. If the installation is in an area with explosion risk, check the manufacturer's documentation for the DSCA and DSCT variants available for such areas before sending the quotation request.

How long does delivery of Dataforth modules to Romania take?

We supply them to order, usually in 1–4 weeks, depending on the manufacturer's confirmation for the requested code. This range is supplied to order, and the lead time may vary from one code to another.

What details should I give for a Dataforth module quotation?

Give the exact module code or, if you do not know it, the type of signal measured, the required input/output range and the type of mounting — DIN rail or panel. For classified areas, also mention the ATEX or UL certification requirement of the installation.

How do I request a Dataforth quotation?

Send the Dataforth code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Dataforth Corporation (manufacturer documentation)