Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Gruner supplier in Romania

For Gruner we quote actuators for dampers and valves from the 340, 342, 360, 362, 328, 327 and 224 series; we need the nameplate, the torque, the voltage, the control signal and the fail-safe position wanted.

Founded in 1953 · Headquarters: Wehingen, Germany

Request a quote

Who is Gruner and what does it make?

Gruner is a German manufacturer based in Wehingen, founded in 1953, which makes actuators, relays and solenoids. For quotations the actuators are what matter: electric actuators for ventilation dampers, fire and smoke dampers, variable flow dampers and small ball valves. The range is divided by function: actuators without a fail-safe position, with a fail-safe position, with a return spring, spindle type, for fire protection, for smoke extraction, high-speed, for variable flow (VAV) and for valves.

The series are recognised by number. The 340 and 360 actuators are spring-return, while 342 and 362 are intended for smoke extraction; they are offered with a voltage of 24, 120 or 230 V, alternating or direct current, have a pre-tensioned spring that gives torque over the whole 95° rotation angle, steel components resistant above 120 °C and Modbus RTU or BACnet MS/TP communication. The high-speed models 328CS and 328QS reach a torque of up to 60 Nm, for dampers of up to 10 m², with a travel time of about 5 seconds. Model 327 is the VAV actuator, and 224 is the rotary actuator for ball valves up to DN 40.

In maintenance, the interest lies in replacing the actuator on a damper or a valve of a ventilation or heating installation. The choice depends on the torque, the voltage, the control signal and the fail-safe position required when power is lost. With these details, a replacement can be checked without removing the damper, starting from the actuator nameplate.

What do we supply from the Gruner range?

ProductDescription
340, 342, 360 and 362, fire protection and smoke extractionSpring-return actuators (340 and 360) and actuators for smoke extraction (342 and 362), with voltages of 24, 120 or 230 V, a 95° rotation angle, potential-free auxiliary contacts and a thermal fuse option for duct mounting.
328CS and 328QS, high-speed actuatorsFast actuators, with torque up to 60 Nm, for dampers with an area of up to 10 m², with a travel time of about 5 seconds. The 328QS version can have a fail-safe position on loss of supply and an optional serial interface for precise positioning.
327, variable flow (VAV) actuatorActuator for linear control of the air flow, with the position proportional to the flow. It is designed for more than 100,000 full cycles and 1.5 million partial cycles, with flanges and connectors for quick mounting.
224, rotary actuator for valvesActuator for opening and closing ball valves up to DN 40, for steam, hot water, cold water or glycol, at temperatures between −30 and +141 °C.

Why Gruner?

  • Actuators by function — with and without a fail-safe position, high-speed, for VAV, for fire protection and for valves, so a damper can be equipped from the same family
  • The 340, 342, 360 and 362 series — pre-tensioned spring with torque over the whole 95° rotation, voltages of 24, 120 or 230 V and steel components above 120 °C
  • The 328CS and 328QS series — torque up to 60 Nm, dampers up to 10 m² and a travel time of about 5 seconds
  • The 224 actuator for ball valves up to DN 40 — temperatures from −30 to +141 °C, for steam, hot water, cold water and glycol solutions
  • Modbus RTU or BACnet MS/TP communication on the fire protection series — integration into building automation systems

Which Gruner codes and series are requested most often?

CodeDescription
340Spring-return actuator for fire protection
342Actuator for smoke extraction
360Spring-return actuator for fire protection
362Actuator for smoke extraction
328CSFast actuator, up to 60 Nm
328QSFast actuator with optional fail-safe position
327VAV actuator for air flow control
224Rotary actuator for ball valves up to DN 40

Where is Gruner equipment used?

  • Industrial ventilation — actuators for air and flow dampers
  • Fire protection and smoke extraction — 340, 342, 360 and 362 actuators on fire dampers
  • Heating installations — 224 actuators on ball valves up to DN 40
  • Building automation — integration through Modbus RTU, BACnet MS/TP or itaMAX
  • Controlled-air spaces — VAV 327 actuators for air flow control

How do we supply Gruner in Romania?

From the range we can quote Gruner actuators from the 340, 342, 360, 362, 328, 327 and 224 series. Orders are fulfilled; an actuator can ship in 24–72 h when the item is in stock, locally or at the supplier, otherwise usually in 1–4 weeks. The lead time can be longer, depending on the specification. Send a photo of the nameplate with the series, the torque, the supply voltage, the control signal, the fail-safe position wanted and the data of the damper or valve. We confirm the exact lead time in the quotation. Relays and solenoids are outside our offer.

Fitting an actuator on a third-party damper or valve is established from the torque required, the type of shaft and the clamping dimensions.

Frequently asked questions about Gruner

What does Gruner make?

Gruner makes actuators, relays and solenoids. The actuators are electric actuators for air dampers, fire and smoke protection installations, VAV air flow control and valves. The range is divided into actuators with and without a fail-safe position, high-speed, spindle type and for valves.

How do I choose a Gruner actuator for a damper?

The starting points are the torque the damper needs, the supply voltage, the control signal and the fail-safe position required when power is lost. For fire protection, the temperature and the thermal fuse option are added. Send the damper data or the nameplate of the existing actuator.

Do you supply Gruner actuators in Romania, and how quickly?

Yes, Gruner actuators are supplied to order; the lead time is usually 1–4 weeks, and a model can ship in 24–72 h when the item is in stock, locally or at the supplier. If the series requested has special voltage or interface versions, the lead time can be longer, and we specify it in the quotation.

The actuator on my damper has failed; how do you identify the replacement?

Photograph the nameplate and note the series, the torque, the voltage, the control signal and the direction of rotation. If the damper shaft and the clamping system are known, we check whether a Gruner series can be fitted directly, to avoid modifying the damper.

What details do I need to send for a quotation on a valve actuator?

Send the type and diameter of the valve (ball valve, up to DN 40 for the 224 series), the fluid (steam, water or glycol), the temperature, the supply voltage and the control signal. If you are integrating it into the building automation, specify the protocol or interface used.

How do I request a Gruner quotation?

Send the Gruner code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Gruner AG (manufacturer documentation)