Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Magnet-Schultz supplier in Romania

For Magnet-Schultz we quote G MC X and G TC A linear solenoids, G HU Z locking units, G MH holding electromagnets and F HM G valve electromagnets; for a quotation we need the nameplate code, the voltage, the stroke and the force.

Founded in 1912 · Headquarters: Memmingen, Germany

Request a quote

Who is Magnet-Schultz and what does it make?

Magnet-Schultz is a German manufacturer headquartered in Memmingen, founded in 1912, specialised in actuating electromagnets: linear and rotary solenoids, pin locking units, holding electromagnets, electromagnets for hydraulic and pneumatic valves, AC vibrators, sensors and control electronics. A linear solenoid moves a part over a short stroke, from a few millimetres up to 30 mm on direct current and 45 mm on alternating current, and can replace a small pneumatic cylinder in a mechanism that has to be automated.

The range has a few well-defined families. Single-acting linear solenoids (G MC X, F HM G, G TC A, G TA) cover diameters from 20 to 100 mm and magnetic forces from 1.7 to 370 N. Pin locking units (G HU Z, G SC X) take lateral forces from 15 N up to 3000 N. G MH holding electromagnets give forces of 135–3300 N, and the GM P version with a permanent magnet holds the part without power. G DA, G DC and G DR rotary solenoids perform rotations of up to 110°, with a torque from 0.16 to 87 Ncm. For hydraulics there are ON/OFF and proportional F HM G electromagnets with F HT S or F HT P, for nominal pressures of 210 and 250 bar.

The range also includes ATEX devices according to the manufacturer's documentation, for explosive atmospheres and underground mines: G TC E and F MM E solenoids, locking units and electromagnets for hydraulic and pneumatic valves. They are used on hydraulic valves of mobile and stationary machinery, for locking doors and covers, for vibrating masses without wearing parts, on pneumatic valves for rail vehicles and on automatic lines.

What do we supply from the Magnet-Schultz range?

ProductDescription
Linear solenoidsSingle-acting, reversing and polarised solenoids, on direct or alternating current, with diameters of 20–100 mm and a stroke of 3 to 30 mm on direct current. They are used to move, pull or push a part over a short distance, for example on latches and coupling mechanisms.
Pin locking units and holding electromagnetsLocking units keep doors, flaps and levers closed and take large lateral forces; holding electromagnets (G MH and GM P with a permanent magnet) fix or carry ferrous parts, with holding forces of up to 3300 N.
Electromagnets for hydraulic and pneumatic valvesON/OFF and proportional electromagnets for oil valves, nominal pressures of 210–250 bar, plus electromagnets and miniature valves for gaseous media, with 2/2 and 3/2 functions. There are versions for rail pneumatic valves, at -40…+70 °C.
Rotary solenoids and AC vibratorsG DA, G DC and G DR rotary solenoids perform fast movements of up to 110°, ON/OFF or proportional. AC vibrators (W ZA W, Y ZA W, Y ZU W) vibrate masses without wear, with a peak force of 18 N up to 1450 N.

Why Magnet-Schultz?

  • ON/OFF and proportional electromagnets for hydraulics (F HM G + F HT S/P): diameters of 37, 45 and 63 mm, nominal pressure 210 or 250 bar
  • Families according to the manufacturer's documentation for explosive atmospheres and underground mines: solenoids, locking units and valve electromagnets
  • Pin locking units: they take lateral forces from 15 N up to 3000 N, in a version with a return spring and, optionally, with a position limiter
  • Holding electromagnets with a permanent magnet (GM P): they hold the part without current, and the force drops when the coil is energised with the correct polarity
  • Rotary solenoids with a shaft bearing: fast rotation of up to 110° without a mechanism with a motor, gearbox and limiter

Which Magnet-Schultz codes and series are requested most often?

CodeDescription
G MC XSingle-acting linear solenoid, 37–63 mm
F HM G + F MT XSingle-acting solenoid, force 11–176 N
G TC ASingle-acting solenoid, 40–100 mm, up to 370 N
G TU WReversing solenoid, 40–90 mm
G TC EExplosion-proof linear solenoid
G HU ZPin locking unit, 7–50 mm
G SC XPin locking unit, 37–63 mm
G MHHolding electromagnet, 135–3300 N
GM PHolding electromagnet with permanent magnet
G DAON/OFF rotary solenoid, 95°, 65° or 35°
G DRProportional rotary solenoid, 110°
F HM G + F HT SON/OFF electromagnet for hydraulic valves, 210/250 bar
F HM G + F HT PProportional electromagnet for hydraulic valves
F MM EExplosion-proof electromagnet housing 35–60 mm
G BR E 022Explosion-proof valve electromagnet, width 22 mm
W ZA WAC vibrator, peak force 18–1450 N

Where is Magnet-Schultz equipment used?

  • Mobile and stationary hydraulics: ON/OFF and proportional electromagnets for oil valves
  • Pneumatics and automatic lines: electromagnets and valves for gases, miniature and proportional
  • Explosive atmospheres and underground mines: solenoids and locking units in dedicated versions
  • Mechanisation of doors, covers and latches: pin locking units and holding electromagnets
  • Rail rolling stock: pneumatic valves for rail applications

How do we supply Magnet-Schultz in Romania?

We can quote Magnet-Schultz linear and rotary solenoids, locking units, holding electromagnets, valve electromagnets and vibrators, including versions for explosion-risk areas. Items are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer for special versions. For a correct request, send the complete code from the nameplate, the voltage and type of current, the relative duty cycle, the stroke and force required and, for ATEX versions, the protection marking.

The real force of a solenoid drops quickly with the air gap, so we confirm the type on the basis of the working stroke and the duty cycle, not only the nominal force.

Frequently asked questions about Magnet-Schultz

What does Magnet-Schultz make?

Magnet-Schultz makes in Germany actuating electromagnets: linear and rotary solenoids, pin locking units, holding electromagnets, electromagnets and valves for hydraulics and pneumatics, AC vibrators and sensors, including versions for explosion-risk areas, according to the manufacturer's documentation.

How do I choose a linear solenoid by force and stroke?

The force of the solenoid depends on the position of the armature: it drops as the air gap increases. We start from the working stroke, the force required at the start and at the end, the voltage and the relative duty cycle. Send this data and the mounting space to determine the series and the diameter.

Do you supply Magnet-Schultz products in Romania and how quickly?

Yes, to order, usually 1–4 weeks. Special or explosion-protected versions may take longer, and the lead time is confirmed in the quotation once we receive the exact code.

Can I replace an F HM G hydraulic valve electromagnet with another?

Only after checking the complete code, the voltage, the nominal pressure (210 or 250 bar) and the type of valve it is mounted on. An ON/OFF electromagnet and a proportional one are not interchangeable; if you send us the nameplate, we check the fit.

What data is needed for a solenoid in an explosive atmosphere?

The ATEX or IECEx marking of the zone, the gas or dust group, the ambient temperature, the voltage, the stroke and the force, plus the type of device required: linear solenoid, locking unit or valve electromagnet. With these the series is determined: G TC E or F MM E.

How do I request a Magnet-Schultz quotation?

Send the Magnet-Schultz code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Magnet-Schultz (manufacturer documentation)