End Armaturen supplier in Romania
For END-Armaturen we offer stainless steel and brass ball valves, high-pressure ball valves, butterfly valves and needle valves; with the order code (for example ZA310062) we find the exact item, including for SEAP tenders.
Headquarters: Bad Oeynhausen, Germany
Who is End Armaturen and what does it make?
END-Armaturen is a German manufacturer of industrial valves (ball valves, butterfly valves, gate valves, solenoid valves, control valves and safety valves), used in water supply, oil and gas, the chemical and petrochemical industry, pharmaceuticals, energy and environmental protection.
The ball valve range includes stainless steel and brass versions, with 2, 3 or 4 ways, including high-pressure variants, manually, electrically or pneumatically actuated. The ball valves cover sizes from 1/8 inch to 4 inches, and the butterfly valves from DN40 to DN300.
The END-Armaturen range covers common industrial valves for water, chemicals and energy; we confirm the exact model by code, from the manufacturer's catalogue.
What do we supply from the End Armaturen range?
| Product | Description |
|---|---|
| Stainless Steel and Brass Ball Valves | Stainless steel or brass ball valves, with 2, 3 or 4 ways, manually, electrically or pneumatically actuated. The body and seal material (for example stainless steel 1.4408 with PTFE or FKM) depends on the model. |
| High-Pressure Ball Valves | High-pressure ball valves, for example the ZA series, in stainless steel, with PTFE-FKM sealing and nominal pressure of up to PN64 at DN15. |
| Butterfly Valves | Butterfly valves with a cast iron body and a stainless steel or cast iron disc, depending on the model, for water and common industrial fluids (for example WA534009: DN80, PN10/16, EPDM seal). Sealing liners available in materials compatible with the specific process fluid, selected on the basis of the chemical compatibility chart. Manual, pneumatic or electric actuation, with the option of fitting limit switches for remote signalling. |
| Ball Valves for Instrumentation and Manifolds | Small-size ball valves for isolating process instruments — pressure gauges, pressure and temperature transmitters — from the main line, in instrumentation installations and auxiliary lines. Threaded or compression connections, high nominal pressures compatible with the process line they serve. Compact stainless steel construction, with a quick-operating handle and a clear open/closed position indicator. A standard element in any process installation that requires taking instruments out of service for calibration or replacement without shutting down the main line. |
Why End Armaturen?
- Wide range of industrial valves — ball, butterfly, gate and control valves and safety valves, in the same product family
- Actuation from the same range — valves can be fitted with manual, electric or pneumatic actuation
- Varied sealing — PTFE, FKM, NBR or EPDM, depending on the model
- Materials chosen to suit the fluid — body in stainless steel, brass or cast iron, depending on the model
- Varied diameters and nominal pressures — from 1/8 inch up to DN300, depending on the valve type
- Technical documentation — datasheets and catalogue data available by code
Which End Armaturen codes and series are requested most often?
| Code | Description |
|---|---|
| ZA310062 | Ball valve DN15, PN64, stainless steel with PTFE-FKM seal, weld ends |
| WA534009 | Butterfly valve DN80, PN10/16, cast iron body with EPDM seal, ISO5211 mounting |
| AC101023 | 1/2 inch needle valve, PN100, brass body, for fine adjustment |
| ZE311062 | Ball valve DN15, PN64, stainless steel with PTFE seal, full bore |
| MP311005 | Ball valve DN32, PN40, stainless steel with PTFE-FKM seal, ISO5211 mounting |
| MP311007 | Ball valve DN50, PN40, stainless steel with PTFE-FKM seal, ISO5211 mounting |
| WA532009 | Butterfly valve DN80, PN10/16, cast iron body with NBR seal and stainless steel disc |
| WA532008 | Butterfly valve DN65, PN10/16, cast iron body with NBR seal and stainless steel disc |
| WM534013 | LUG-type butterfly valve DN200, PN16, cast iron body with EPDM seal |
| WM552014 | LUG-type butterfly valve DN250, PN16, cast iron body and disc, NBR seal |
| FS400309 | Mounting set DN80, PN16, stainless steel for compact ball valves type VK/ZK/WK/MK |
| AC301002 | Needle valve DN15, flanged, PN40, stainless steel with PTFE seal |
Where is End Armaturen equipment used?
- Water — water supply and industrial water installations
- Oil and gas — refineries and high-pressure petrochemical installations
- Chemical industry — corrosive and aggressive media
- Pharmaceuticals and biotechnology — valves for process installations
- Environmental protection — treatment and purification installations
- Energy — installations with extreme temperature and pressure requirements
How do we supply End Armaturen in Romania?
We order END-Armaturen ball and butterfly valves through EU supply channels, based on the manufacturer's technical documentation — we check availability on each request. The lead time to order is usually 1–4 weeks; only for common instrumentation accessories can we offer 24–72 h when the item is in stock, locally or at the supplier, as a general rule, with availability confirmed for each specific product. We need the process fluid, the minimum and maximum working temperature, the nominal pressure and the sealing class required, so that we can pass the correct specification on for configuration. The quotation follows once this complete technical data has been received.
Availability of special versions is checked on request; warranty interventions on valves already installed rest with the manufacturer.
Frequently asked questions about End Armaturen
Which END-Armaturen ball valve should I choose for high pressure at small diameters?
For high pressures at small diameters, the ZA series stainless steel ball valves, such as ZA310062, with PTFE-FKM sealing and weld ends, cover pressures up to PN64. For full bore without narrowing of the cross-section, the ZE version, such as ZE311062, is the right choice for installations where the pressure loss must be minimised.
What is the difference between the END-Armaturen WA532009 and WM534013 butterfly valves?
The WA532009 is a wafer butterfly valve, fitted between flanges, with a cast iron body, NBR seal and stainless steel disc, at DN80. The WM534013 is a LUG-type variant, with its own threaded holes that allow one branch of the pipeline to be removed without opening the entire section, useful for partial maintenance work.
What are the technical data of the END-Armaturen WA534009 butterfly valve?
The WA534009 is a wafer-type butterfly valve, DN80, PN10/16, with a one-piece GG-25 (EN-GJL-250) cast iron body, stainless steel disc and EPDM liner. It is operated with a lever, has an ISO 5211 F05/F07 mounting flange for an actuator and works with media between -20 and +120 °C.
What information do I send for a quotation for an END-Armaturen valve?
It helps to state the nominal diameter, the nominal pressure, the type of ends (weld, flange or thread) and the sealing material required: PTFE, FKM, NBR or EPDM. These details allow the exact article code, such as ZA310062 or WA534009, to be identified from the manufacturer's catalogue.
What is the END-Armaturen AC101023 needle valve?
It is a 1/2 inch brass needle valve with a nominal pressure of 100 bar, used for fine flow adjustment in instrumentation installations or auxiliary lines. The needle construction allows precise throttling of the flow, unlike a ball valve, which only has a fully closed or fully open function.
How do I request a End Armaturen quotation?
Send the End Armaturen code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: END-Armaturen, END-Armaturen GmbH & Co. KG (manufacturer documentation)

