ESBE supplier in Romania
For ESBE we quote VRG rotary valves, mixing and diverting valves, ARA600 rotary actuators, UPTT500 thermostatic mixing valves, VTN frost protection valves and circulation units; we need the series and the DN.
Headquarters: Reftele, Sweden
Who is ESBE and what does it make?
ESBE AB makes rotary valves, actuators, controllers and circulation units for heating, cooling and potable water installations, at Reftele, in Sweden. The range includes rotary, diverting, zone and thermostatic mixing valves, rotary and linear actuators, controllers, Plug&Play circulation units and Fresh Hydro units for potable water installations.
VRG330 rotary valves are for mixing or diverting at high flow in heating and cooling installations, including heat pumps. They have DN 20–50, with Rp 3/4"–2" internal thread on the VRG331 or G 1"–2 1/4" external thread on the VRG332. The pressure class is PN10, and the working pressure is 1 MPa. The continuous temperature is up to +110 °C, with peaks of +130 °C, and the medium is heating water according to VDI 2035, with water-glycol mixtures up to 50 %. The body is made of dezincification-resistant brass, with EPDM O-rings.
ARA600 actuators control DN 15–50 rotary valves with a 2-point or 3-point signal, at 230 V AC. The ARA635–ARA656 versions have a running time of 15, 30 or 60 s, a maximum torque of 3 or 6 Nm, protection class IP41 and, on some, a pre-mounted auxiliary switch. For frost protection of heat pumps there are the VTN100 and VTN200 frost protection valves, and for potable water thermostatic mixing valves, for example UPTT500. MBA130 is a diverting valve.
What do we supply from the ESBE range?
| Product | Description |
|---|---|
| VRG330 rotary valves | Mixing or diverting valves for heating and cooling installations. DN 20–50, PN10, 1 MPa, continuous temperature up to +110 °C, dezincification-resistant brass body, EPDM O-rings; they work with water and with water-glycol mixtures up to 50 %. |
| ARA600 rotary actuators | Actuators for DN 15–50 rotary valves, with 2-point or 3-point signal, 230 V AC supply, IP41, 90° angle. The ARA635–ARA656 series have a running time of 15, 30 or 60 s and a torque of 3 or 6 Nm. |
| Thermostatic and frost protection valves | UPTT500 is a thermostatic mixing valve. VTN100 and VTN200 are frost protection valves, suitable for hot and cold water installations, and MBA130 is a diverting valve. |
| Circulation units and Fresh Hydro | Plug&Play circulation units speed up the installation of a heating circuit. Fresh Hydro units are for potable water installations, and the range also includes separation units, controllers and control units. |
Why ESBE?
- VRG330 rotary valves with a high Kvs flow coefficient, DN 20–50 — mixing or diverting at high flow, useful with heat pumps
- Dezincification-resistant brass and EPDM O-rings — materials chosen for heating water and glycol mixtures
- ARA600 actuators with a running time of 15, 30 or 60 s — the speed is chosen according to the inertia of the circuit
- 2-point or 3-point control signal — the same actuator suits simple controllers and those with continuous control
- VTN frost protection valves and UPTT thermostatic valves — the heat pump is protected from frost and the hot water temperature is limited
Which ESBE codes and series are requested most often?
| Code | Description |
|---|---|
| VRG330 | Rotary mixing or diverting valve, DN 20–50, PN10 |
| VRG331 | VRG330 version with Rp 3/4"–2" internal thread |
| VRG332 | VRG330 version with G 1"–2 1/4" external thread |
| ARA600 | Rotary actuator with 2-point signal, 230 V AC |
| ARA635 / ARA636 | 15 s, 3 Nm actuator, for DN 15–32 valves |
| ARA645 / ARA646 | 30 s, 6 Nm actuator |
| ARA655 / ARA656 | 60 s, 6 Nm actuator |
| UPTT500 | Thermostatic mixing valve |
| VTN100 / VTN200 | Frost protection valves for hot and cold water |
| MBA130 | Diverting valve |
Where is ESBE equipment used?
- Heating installations — mixing and diverting with rotary valves
- Cooling installations — circuits with water and glycol mixtures
- Heat pumps — high-flow diverting valves
- Potable water — Fresh Hydro units and thermostatic valves
- Hybrid circuits with one or two heat sources — controllers and circulation units
How do we supply ESBE in Romania?
We can quote VRG rotary valves, diverting and mixing valves, ARA600 actuators, UPTT500 thermostatic valves, VTN frost protection valves and circulation units. For a correct quotation we need the code from the valve or actuator, the DN, the type of threaded connection, the pressure and temperature, the fluid, the supply voltage and the control signal. If you are replacing an existing set, send a photo of the plate. Valve-actuator sets are supplied to order, and the exact lead time appears in your quotation.
For the valve-actuator pair we check the DN, the torque and the running time in the quotation, before confirming the version.
Frequently asked questions about ESBE
What are the UPTT500, MBA130, VTN100 and VTN200 valves at ESBE?
ESBE makes rotary, diverting, zone and thermostatic mixing valves, actuators, controllers, circulation units and Fresh Hydro units for potable water. The company is at Reftele, in Sweden. The items include VRG330 valves and ARA600 actuators. UPTT500 is a thermostatic mixing valve, MBA130 a diverting valve, and VTN100 and VTN200 are frost protection valves for hot and cold water.
How do I choose a VRG330 rotary valve?
The choice starts from the DN, between 20 and 50, from the Kvs and from the connection, internal on the VRG331 or external on the VRG332. The pressure is PN10 and the temperature up to +110 °C. Send the flow, the fluid, for example water with glycol up to 50 %, and the pipe diameter.
Do you supply ESBE products in Romania and how fast?
ESBE valves, actuators and units are supplied to order, usually in 1–4 weeks. A valve or an actuator can ship in 24–72 h when the item is in stock, locally or at the supplier. For more complex sets the lead time may be longer; we set it in the quotation.
Can I replace an existing ARA600 actuator?
Yes, based on the ARA6xx code: the running time of 15, 30 or 60 s, the torque of 3 or 6 Nm, the 230 V voltage and the 2-point or 3-point signal. ARA635 and ARA636 are recommended only for DN 15–32 valves. Send a photo of the plate.
What data do you need for a VRG330 valve or an ARA645 actuator?
For the valve we need the series, the DN, the thread, the fluid, the pressure and the temperature. For the actuator we need the ARA code, the voltage, the control signal, the running time and whether you want a pre-mounted auxiliary switch. For circulation units add the flow and the pump head. VRG330 is a rotary mixing or diverting valve, DN 20–50, PN10, and ARA645 a 30 s, 6 Nm actuator.
How do I request a ESBE quotation?
Send the ESBE code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: ESBE AB (manufacturer documentation)

